All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Bruce Allan <bruce.w.allan@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 4/6] e1000e: cleanup boolean logic
Date: Sat, 14 Apr 2012 02:16:29 -0700	[thread overview]
Message-ID: <1334394991-5839-5-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1334394991-5839-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Bruce Allan <bruce.w.allan@intel.com>

Replace occurrences of 'if (<bool expr> == <1|0>)' with
'if ([!]<bool expr>)'

Replace occurrences of '<bool var> = (<non-bool expr>) ? true : false'
with '<bool var> = <non-bool expr>'.

Replace occurrence of '<bool var> = <non-bool expr>' with
'<bool var> = !!<non-bool expr>'

While the latter replacement is not really necessary, it is done here for
consistency and clarity.  No functional changes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/80003es2lan.c |    4 +--
 drivers/net/ethernet/intel/e1000e/82571.c       |    9 +++----
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |   26 +++++++++++-----------
 drivers/net/ethernet/intel/e1000e/mac.c         |    2 +-
 drivers/net/ethernet/intel/e1000e/manage.c      |    2 +-
 drivers/net/ethernet/intel/e1000e/phy.c         |   23 +++++++++----------
 6 files changed, 31 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index bac9dda..fbc84d4 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -228,9 +228,7 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw)
 	/* FWSM register */
 	mac->has_fwsm = true;
 	/* ARC supported; valid only if manageability features are enabled. */
-	mac->arc_subsystem_valid =
-	        (er32(FWSM) & E1000_FWSM_MODE_MASK)
-	                ? true : false;
+	mac->arc_subsystem_valid = !!(er32(FWSM) & E1000_FWSM_MODE_MASK);
 	/* Adaptive IFS not supported */
 	mac->adaptive_ifs = false;
 
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index b3fdc69..609c18c 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -295,9 +295,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
 		 * ARC supported; valid only if manageability features are
 		 * enabled.
 		 */
-		mac->arc_subsystem_valid =
-			(er32(FWSM) & E1000_FWSM_MODE_MASK)
-			? true : false;
+		mac->arc_subsystem_valid = !!(er32(FWSM) &
+					      E1000_FWSM_MODE_MASK);
 		break;
 	case e1000_82574:
 	case e1000_82583:
@@ -798,7 +797,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 	/* Check for pending operations. */
 	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 		usleep_range(1000, 2000);
-		if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+		if (!(er32(EECD) & E1000_EECD_FLUPD))
 			break;
 	}
 
@@ -822,7 +821,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 
 	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 		usleep_range(1000, 2000);
-		if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+		if (!(er32(EECD) & E1000_EECD_FLUPD))
 			break;
 	}
 
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 64c7644..0f158a9 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -2212,7 +2212,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
 
 	/* Check if the flash descriptor is valid */
-	if (hsfsts.hsf_status.fldesvalid == 0) {
+	if (!hsfsts.hsf_status.fldesvalid) {
 		e_dbg("Flash descriptor invalid.  SW Sequencing must be used.\n");
 		return -E1000_ERR_NVM;
 	}
@@ -2232,7 +2232,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 	 * completed.
 	 */
 
-	if (hsfsts.hsf_status.flcinprog == 0) {
+	if (!hsfsts.hsf_status.flcinprog) {
 		/*
 		 * There is no cycle running at present,
 		 * so we can start a cycle.
@@ -2250,7 +2250,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 		 */
 		for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
 			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-			if (hsfsts.hsf_status.flcinprog == 0) {
+			if (!hsfsts.hsf_status.flcinprog) {
 				ret_val = 0;
 				break;
 			}
@@ -2292,12 +2292,12 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
 	/* wait till FDONE bit is set to 1 */
 	do {
 		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-		if (hsfsts.hsf_status.flcdone == 1)
+		if (hsfsts.hsf_status.flcdone)
 			break;
 		udelay(1);
 	} while (i++ < timeout);
 
-	if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
+	if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
 		return 0;
 
 	return -E1000_ERR_NVM;
@@ -2408,10 +2408,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 			 * ICH_FLASH_CYCLE_REPEAT_COUNT times.
 			 */
 			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-			if (hsfsts.hsf_status.flcerr == 1) {
+			if (hsfsts.hsf_status.flcerr) {
 				/* Repeat for some time before giving up. */
 				continue;
-			} else if (hsfsts.hsf_status.flcdone == 0) {
+			} else if (!hsfsts.hsf_status.flcdone) {
 				e_dbg("Timeout error - flash cycle did not complete.\n");
 				break;
 			}
@@ -2641,7 +2641,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	if ((data & 0x40) == 0) {
+	if (!(data & 0x40)) {
 		data |= 0x40;
 		ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
 		if (ret_val)
@@ -2759,10 +2759,10 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 		 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
 		 */
 		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-		if (hsfsts.hsf_status.flcerr == 1)
+		if (hsfsts.hsf_status.flcerr)
 			/* Repeat for some time before giving up. */
 			continue;
-		if (hsfsts.hsf_status.flcdone == 0) {
+		if (!hsfsts.hsf_status.flcdone) {
 			e_dbg("Timeout error - flash cycle did not complete.\n");
 			break;
 		}
@@ -2914,10 +2914,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 			 * a few more times else Done
 			 */
 			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-			if (hsfsts.hsf_status.flcerr == 1)
+			if (hsfsts.hsf_status.flcerr)
 				/* repeat for some time before giving up */
 				continue;
-			else if (hsfsts.hsf_status.flcdone == 0)
+			else if (!hsfsts.hsf_status.flcdone)
 				return ret_val;
 		} while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
 	}
@@ -3916,7 +3916,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
 	if (hw->mac.type <= e1000_ich9lan) {
-		if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+		if (!(er32(EECD) & E1000_EECD_PRES) &&
 		    (hw->phy.type == e1000_phy_igp_3)) {
 			e1000e_phy_init_script_igp3(hw);
 		}
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index decad98..d832749 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -681,7 +681,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
 		return ret_val;
 	}
 
-	if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+	if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
 		hw->fc.requested_mode = e1000_fc_none;
 	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
 		hw->fc.requested_mode = e1000_fc_tx_pause;
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
index 473f8e7..bacc950 100644
--- a/drivers/net/ethernet/intel/e1000e/manage.c
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -85,7 +85,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 
 	/* Check that the host interface is enabled. */
 	hicr = er32(HICR);
-	if ((hicr & E1000_HICR_EN) == 0) {
+	if (!(hicr & E1000_HICR_EN)) {
 		e_dbg("E1000_HOST_EN bit disabled.\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 35b4557..bd5ef64 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -718,7 +718,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	 *   1 - Enabled
 	 */
 	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
-	if (phy->disable_polarity_correction == 1)
+	if (phy->disable_polarity_correction)
 		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
 
 	/* Enable downshift on BM (disabled by default) */
@@ -1090,7 +1090,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	 * If autoneg_advertised is zero, we assume it was not defaulted
 	 * by the calling code so we set to advertise full capability.
 	 */
-	if (phy->autoneg_advertised == 0)
+	if (!phy->autoneg_advertised)
 		phy->autoneg_advertised = phy->autoneg_mask;
 
 	e_dbg("Reconfiguring auto-neg advertisement params\n");
@@ -1596,7 +1596,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	ret_val = e1e_rphy(hw, offset, &phy_data);
 
 	if (!ret_val)
-		phy->speed_downgraded = (phy_data & mask);
+		phy->speed_downgraded = !!(phy_data & mask);
 
 	return ret_val;
 }
@@ -1925,8 +1925,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	phy->polarity_correction = (phy_data &
-				    M88E1000_PSCR_POLARITY_REVERSAL);
+	phy->polarity_correction = !!(phy_data &
+				      M88E1000_PSCR_POLARITY_REVERSAL);
 
 	ret_val = e1000_check_polarity_m88(hw);
 	if (ret_val)
@@ -1936,7 +1936,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX);
+	phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
 
 	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
 		ret_val = e1000_get_cable_length(hw);
@@ -1999,7 +1999,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	phy->is_mdix = (data & IGP01E1000_PSSR_MDIX);
+	phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
 
 	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
 	    IGP01E1000_PSSR_SPEED_1000MBPS) {
@@ -2052,8 +2052,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
 	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
 	if (ret_val)
 		return ret_val;
-	phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
-	                           ? false : true;
+	phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
 
 	if (phy->polarity_correction) {
 		ret_val = e1000_check_polarity_ife(hw);
@@ -2070,7 +2069,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+	phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
 
 	/* The following parameters are undefined for 10/100 operation. */
 	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
@@ -2979,7 +2978,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 		if ((hw->phy.type == e1000_phy_82578) &&
 		    (hw->phy.revision >= 1) &&
 		    (hw->phy.addr == 2) &&
-		    ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
+		    !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) {
 			u16 data2 = 0x7EFF;
 			ret_val = e1000_access_phy_debug_regs_hv(hw,
 								 (1 << 6) | 0x3,
@@ -3265,7 +3264,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+	phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
 
 	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
 	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
-- 
1.7.7.6

  parent reply	other threads:[~2012-04-14  9:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-14  9:16 [net-next 0/6][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-04-14  9:16 ` [net-next 1/6] e100: Support the get_ts_info ethtool method Jeff Kirsher
2012-04-14  9:16 ` [net-next 2/6] e100: enable transmit time stamping Jeff Kirsher
2012-04-14  9:16 ` [net-next 3/6] e1000e: cleanup remaining strings split across multiple lines Jeff Kirsher
2012-04-14  9:16 ` Jeff Kirsher [this message]
2012-04-14  9:16 ` [net-next 5/6] igb: Update version to 3.4.7 Jeff Kirsher
2012-04-14  9:16 ` [net-next 6/6] ixgbe: add I2C clock stretching Jeff Kirsher
2012-04-14 19:18 ` [net-next 0/6][pull request] Intel Wired LAN Driver Updates David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334394991-5839-5-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=bruce.w.allan@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.