[PATCH 15/15] ARM: ux500: Enable PRCMU Timer 4 (clocksource) via Device Tree

[lee.jones@linaro.org (Lee Jones)]

In dbx500 based devices the PRCMU Timer 4 is used as a clocksource
and sched_clock. Here we fetch all necessary addressing information
required for correct PRCMU initialisation from the Device Tree
instead of using hard-coded values.

CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/db8500.dtsi |    8 +++++++-
 arch/arm/mach-ux500/timer.c   |   24 ++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index f633210..9a62f86 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -189,7 +189,13 @@
 			reg = <0x80157000 0x1000>;
 			interrupts = <46 47>;
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
+			ranges;
+
+				prcmu-timer-4 at 80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
 
 			ab8500 at 5 {
 				compatible = "stericsson,ab8500";
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index d37df98..885c742 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -8,6 +8,7 @@
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/smp_twd.h>
 
@@ -43,10 +44,17 @@ static void __init ux500_twd_init(void)
 #define ux500_twd_init()	do { } while(0)
 #endif
 
+const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
+	{ },
+};
+
 static void __init ux500_timer_init(void)
 {
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
+	void __iomem *tmp_base;
+	struct device_node *np;
 
 	if (cpu_is_u5500()) {
 		mtu_timer_base = __io_address(U5500_MTU0_BASE);
@@ -58,6 +66,22 @@ static void __init ux500_timer_init(void)
 		ux500_unknown_soc();
 	}
 
+	/* TODO: Once MTU has been DT:ed place code above into else. */
+	if (of_have_populated_dt()) {
+		np = of_find_matching_node(NULL, prcmu_timer_of_match);
+		if (!np)
+			goto dt_fail;
+
+		tmp_base = of_iomap(np, 0);
+		if (!tmp_base)
+			goto dt_fail;
+
+		prcmu_timer_base = tmp_base;
+	}
+
+dt_fail:
+	/* Doing it the old fashioned way. */
+
 	/*
 	 * Here we register the timerblocks active in the system.
 	 * Localtimers (twd) is started when both cpu is up and running.
-- 
1.7.9.1