From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from gate.crashing.org (gate.crashing.org [63.228.1.57]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id A5DF2B70DC for ; Fri, 20 Apr 2012 13:31:04 +1000 (EST) Message-ID: <1334892657.31646.2.camel@pasglop> Subject: [PATCH 3/3] powerpc/mpic: Properly set default triggers From: Benjamin Herrenschmidt To: linuxppc-dev Date: Fri, 20 Apr 2012 13:30:57 +1000 Content-Type: text/plain; charset="UTF-8" Mime-Version: 1.0 Cc: Thomas Gleixner List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This gets rid of the unused default senses array, and replaces the incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for the initial set_trigger() call when mapping an interrupt. This in turn makes us read the HW state and update the irq desc accordingly. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic.h | 18 ----------------- arch/powerpc/sysdev/mpic.c | 42 ++++++++++++++++++++++++++++----------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c65b929..c9f698a 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -275,9 +275,6 @@ struct mpic unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; @@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node, extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 665b0f8..395af13 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -872,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) if (src >= mpic->num_sources) return -EINVAL; + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + + /* We don't support "none" type */ if (flow_type == IRQ_TYPE_NONE) - if (mpic->senses && src < mpic->senses_count) - flow_type = mpic->senses[src]; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; + flow_type = IRQ_TYPE_DEFAULT; + + /* Default: read HW settings */ + if (flow_type == IRQ_TYPE_DEFAULT) { + switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK))) { + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_EDGE_RISING; + break; + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_EDGE_FALLING; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_LEVEL_HIGH; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_LEVEL_LOW; + break; + } + } + /* Apply to irq desc */ irqd_set_trigger_type(d, flow_type); + /* Apply to HW */ if (mpic_is_ht_interrupt(mpic, src)) vecpri = MPIC_VECPRI_POLARITY_POSITIVE | MPIC_VECPRI_SENSE_EDGE; else vecpri = mpic_type_to_vecpri(mpic, flow_type); - vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | MPIC_INFO(VECPRI_SENSE_MASK)); vnew |= vecpri; @@ -1022,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); /* Set default irq type */ - irq_set_irq_type(virq, IRQ_TYPE_NONE); + irq_set_irq_type(virq, IRQ_TYPE_DEFAULT); /* If the MPIC was reset, then all vectors have already been * initialized. Otherwise, a per source lazy initialization @@ -1413,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, mpic->num_sources = isu_first + mpic->isu_size; } -void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) -{ - mpic->senses = senses; - mpic->senses_count = count; -} - void __init mpic_init(struct mpic *mpic) { int i, cpu;