All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
	Chandrabhanu Mahapatra <cmahapatra@ti.com>
Subject: [PATCH V3 3/3] OMAPDSS: DISPC: Correct DISPC functional clock usage
Date: Fri, 20 Apr 2012 13:43:13 +0000	[thread overview]
Message-ID: <1334928673-27943-1-git-send-email-cmahapatra@ti.com> (raw)
In-Reply-To: <1333379598-11544-4-git-send-email-cmahapatra@ti.com>

DISPC_FCLK is incorrectly used as functional clock of DISPC in scaling
calculations. So, DISPC_CORE_CLK replaces as functional clock of DISPC.
DISPC_CORE_CLK is derived from DISPC_FCLK divided by an independent DISPC
divisor LCD.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
---
 drivers/video/omap2/dss/dispc.c |   25 +++++++++++++++++++------
 drivers/video/omap2/dss/dss.h   |    1 +
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 17ffa71..0417423 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1855,7 +1855,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 			fclk = calc_fclk(channel, in_width, in_height,
 					out_width, out_height);
 			error = (in_width > maxsinglelinewidth || !fclk ||
-				fclk > dispc_fclk_rate());
+				fclk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x = decim_y) {
 					decim_x = min_factor;
@@ -1893,7 +1893,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 					out_width, out_height);
 			error = (error || in_width > maxsinglelinewidth * 2 ||
 				(in_width > maxsinglelinewidth && *five_taps) ||
-				!fclk || fclk > dispc_fclk_rate());
+				!fclk || fclk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x = decim_y) {
 					decim_x = min_factor;
@@ -1926,7 +1926,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	} else {
 		int decim_x_min = decim_x;
 		in_height = DIV_ROUND_UP(height, decim_y);
-		in_width_max = dispc_fclk_rate() /
+		in_width_max = dispc_core_clk_rate() /
 				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
 						out_width);
 		decim_x = DIV_ROUND_UP(width, in_width_max);
@@ -1950,13 +1950,13 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	}
 
 	DSSDBG("required fclk rate = %lu Hz\n", fclk);
-	DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+	DSSDBG("current fclk rate = %lu Hz\n", dispc_core_clk_rate());
 
-	if (!fclk || fclk > dispc_fclk_rate()) {
+	if (!fclk || fclk > dispc_core_clk_rate()) {
 		DSSERR("failed to set up scaling, "
 			"required fclk rate = %lu Hz, "
 			"current fclk rate = %lu Hz\n",
-			fclk, dispc_fclk_rate());
+			fclk, dispc_core_clk_rate());
 		return -EINVAL;
 	}
 
@@ -2646,6 +2646,19 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 	}
 }
 
+unsigned long dispc_core_clk_rate(void)
+{
+	int lcd;
+	unsigned long fclk = dispc_fclk_rate();
+
+	if (dss_has_feature(FEAT_CORE_CLK_DIV))
+		lcd = REG_GET(DISPC_DIVISOR, 23, 16);
+	else
+		lcd = REG_GET(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD), 23, 16);
+
+	return fclk / lcd;
+}
+
 void dispc_dump_clocks(struct seq_file *s)
 {
 	int lcd, pcd;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d4b3dff..1bde34c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -451,6 +451,7 @@ void dispc_mgr_set_pol_freq(enum omap_channel channel,
 		enum omap_panel_config config, u8 acbi, u8 acb);
 unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
 unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
+unsigned long dispc_core_clk_rate(void);
 int dispc_mgr_set_clock_div(enum omap_channel channel,
 		struct dispc_clock_info *cinfo);
 int dispc_mgr_get_clock_div(enum omap_channel channel,
-- 
1.7.1


WARNING: multiple messages have this Message-ID
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
	Chandrabhanu Mahapatra <cmahapatra@ti.com>
Subject: [PATCH V3 3/3] OMAPDSS: DISPC: Correct DISPC functional clock usage
Date: Fri, 20 Apr 2012 19:01:13 +0530	[thread overview]
Message-ID: <1334928673-27943-1-git-send-email-cmahapatra@ti.com> (raw)
In-Reply-To: <1333379598-11544-4-git-send-email-cmahapatra@ti.com>

DISPC_FCLK is incorrectly used as functional clock of DISPC in scaling
calculations. So, DISPC_CORE_CLK replaces as functional clock of DISPC.
DISPC_CORE_CLK is derived from DISPC_FCLK divided by an independent DISPC
divisor LCD.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
---
 drivers/video/omap2/dss/dispc.c |   25 +++++++++++++++++++------
 drivers/video/omap2/dss/dss.h   |    1 +
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 17ffa71..0417423 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1855,7 +1855,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 			fclk = calc_fclk(channel, in_width, in_height,
 					out_width, out_height);
 			error = (in_width > maxsinglelinewidth || !fclk ||
-				fclk > dispc_fclk_rate());
+				fclk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x == decim_y) {
 					decim_x = min_factor;
@@ -1893,7 +1893,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 					out_width, out_height);
 			error = (error || in_width > maxsinglelinewidth * 2 ||
 				(in_width > maxsinglelinewidth && *five_taps) ||
-				!fclk || fclk > dispc_fclk_rate());
+				!fclk || fclk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x == decim_y) {
 					decim_x = min_factor;
@@ -1926,7 +1926,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	} else {
 		int decim_x_min = decim_x;
 		in_height = DIV_ROUND_UP(height, decim_y);
-		in_width_max = dispc_fclk_rate() /
+		in_width_max = dispc_core_clk_rate() /
 				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
 						out_width);
 		decim_x = DIV_ROUND_UP(width, in_width_max);
@@ -1950,13 +1950,13 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	}
 
 	DSSDBG("required fclk rate = %lu Hz\n", fclk);
-	DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+	DSSDBG("current fclk rate = %lu Hz\n", dispc_core_clk_rate());
 
-	if (!fclk || fclk > dispc_fclk_rate()) {
+	if (!fclk || fclk > dispc_core_clk_rate()) {
 		DSSERR("failed to set up scaling, "
 			"required fclk rate = %lu Hz, "
 			"current fclk rate = %lu Hz\n",
-			fclk, dispc_fclk_rate());
+			fclk, dispc_core_clk_rate());
 		return -EINVAL;
 	}
 
@@ -2646,6 +2646,19 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 	}
 }
 
+unsigned long dispc_core_clk_rate(void)
+{
+	int lcd;
+	unsigned long fclk = dispc_fclk_rate();
+
+	if (dss_has_feature(FEAT_CORE_CLK_DIV))
+		lcd = REG_GET(DISPC_DIVISOR, 23, 16);
+	else
+		lcd = REG_GET(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD), 23, 16);
+
+	return fclk / lcd;
+}
+
 void dispc_dump_clocks(struct seq_file *s)
 {
 	int lcd, pcd;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d4b3dff..1bde34c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -451,6 +451,7 @@ void dispc_mgr_set_pol_freq(enum omap_channel channel,
 		enum omap_panel_config config, u8 acbi, u8 acb);
 unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
 unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
+unsigned long dispc_core_clk_rate(void);
 int dispc_mgr_set_clock_div(enum omap_channel channel,
 		struct dispc_clock_info *cinfo);
 int dispc_mgr_get_clock_div(enum omap_channel channel,
-- 
1.7.1


  parent reply	other threads:[~2012-04-20 13:43 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-02 15:13 [PATCH V3 0/3] OMAPDSS: DISPC: Enable predecimation for DMA and VRFB Chandrabhanu Mahapatra
2012-04-02 15:25 ` Chandrabhanu Mahapatra
2012-04-02 15:13 ` [PATCH V3 1/3] OMAPDSS: DISPC: Enable predecimation Chandrabhanu Mahapatra
2012-04-02 15:25   ` Chandrabhanu Mahapatra
2012-04-02 15:13   ` [PATCH V3 2/3] OMAPDSS: DISPC: Handle synclost errors in OMAP3 Chandrabhanu Mahapatra
2012-04-02 15:25     ` Chandrabhanu Mahapatra
2012-04-02 15:13     ` [PATCH V3 3/3] OMAPDSS: DISPC: Correct DISPC functional clock usage Chandrabhanu Mahapatra
2012-04-02 15:25       ` Chandrabhanu Mahapatra
2012-04-19 13:11       ` Tomi Valkeinen
2012-04-19 13:11         ` Tomi Valkeinen
2012-04-20  6:30         ` Mahapatra, Chandrabhanu
2012-04-20  6:42           ` Mahapatra, Chandrabhanu
2012-04-20 13:31       ` Chandrabhanu Mahapatra [this message]
2012-04-20 13:43         ` Chandrabhanu Mahapatra
2012-04-20 14:29         ` Tomi Valkeinen
2012-04-20 14:29           ` Tomi Valkeinen
2012-04-23  4:35           ` Mahapatra, Chandrabhanu
2012-04-23  4:47             ` Mahapatra, Chandrabhanu
2012-04-23  6:19             ` Tomi Valkeinen
2012-04-23  6:19               ` Tomi Valkeinen
2012-04-23  6:46       ` Chandrabhanu Mahapatra
2012-04-23  6:58         ` Chandrabhanu Mahapatra
2012-04-23  7:50         ` Tomi Valkeinen
2012-04-23  7:50           ` Tomi Valkeinen
     [not found] <[PATCH V2 0/3] OMAPDSS: DISPC: Enable predecimation for DMA and VRFB>
2012-04-02 13:59 ` [PATCH V3 0/3] OMAPDSS: DISPC: Enable predecimation for DMA and VRFB Chandrabhanu Mahapatra
2012-04-02 14:11   ` Chandrabhanu Mahapatra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334928673-27943-1-git-send-email-cmahapatra@ti.com \
    --to=cmahapatra@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    --subject='Re: [PATCH V3 3/3] OMAPDSS: DISPC: Correct DISPC functional clock usage' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.