[PATCH 3/4] spi: bcm63xx: set master driver mode_bits.

From: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
To: grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org
Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	Florian Fainelli
	<florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Subject: [PATCH 3/4] spi: bcm63xx: set master driver mode_bits.
Date: Fri, 20 Apr 2012 15:37:35 +0200	[thread overview]
Message-ID: <1334929056-1598-4-git-send-email-florian@openwrt.org> (raw)
In-Reply-To: <1334929056-1598-1-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>

We were not properly advertising the MODE bits supported by this driver, fix
that.

Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 80e5ed3..7491971 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
 	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
+	master->mode_bits = MODEBITS;
 	bs->speed_hz = pdata->speed_hz;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
