[PATCH 1/2] drm/i915: Clarify the semantics of tiling-changed by renaming it

[Chris Wilson <chris@chris-wilson.co.uk>]

Rename obj->tiling_changed to obj->fence_dirty so that it is clear that
it flags when the parameters for an active fence (including the
no-fence) register are changed.

v2: Use fence_dirty to better express what the flag tracks and add a few
more details to the comments to serve as a reminder of how the GPU also
uses the unfenced register slot.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_drv.h        |    9 ++++++++-
 drivers/gpu/drm/i915/i915_gem.c        |    8 ++++----
 drivers/gpu/drm/i915/i915_gem_tiling.c |   10 +++++++++-
 3 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fec57a7..0feffce 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -883,7 +883,14 @@ struct drm_i915_gem_object {
 	 * Current tiling mode for the object.
 	 */
 	unsigned int tiling_mode:2;
-	unsigned int tiling_changed:1;
+	/**
+	 * Whether the tiling parameters for the currently associated fence
+	 * register have changed. Note that for the purposes of tracking
+	 * tiling changes we also treat the unfenced register, the register
+	 * slot that the object occupies whilst it executes a fenced
+	 * command (such as BLT on gen2/3), as a "fence".
+	 */
+	unsigned int fence_dirty:1;
 
 	/** How many users have pinned this object in GTT space. The following
 	 * users can each hold at most one reference: pwrite/pread, pin_ioctl
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7bc4a40..5bf8829 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -66,7 +66,7 @@ static inline void i915_gem_object_fence_lost(struct drm_i915_gem_object *obj)
 	/* As we do not have an associated fence register, we will force
 	 * a tiling change if we ever need to acquire one.
 	 */
-	obj->tiling_changed = false;
+	obj->fence_dirty = false;
 	obj->fence_reg = I915_FENCE_REG_NONE;
 }
 
@@ -2456,7 +2456,7 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj)
 	/* Have we updated the tiling parameters upon the object and so
 	 * will need to serialise the write to the associated fence register?
 	 */
-	if (obj->tiling_changed) {
+	if (obj->fence_dirty) {
 		ret = i915_gem_object_flush_fence(obj);
 		if (ret)
 			return ret;
@@ -2465,7 +2465,7 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj)
 	/* Just update our place in the LRU if our fence is getting reused. */
 	if (obj->fence_reg != I915_FENCE_REG_NONE) {
 		reg = &dev_priv->fence_regs[obj->fence_reg];
-		if (!obj->tiling_changed) {
+		if (!obj->fence_dirty) {
 			list_move_tail(&reg->lru_list,
 				       &dev_priv->mm.fence_list);
 			return 0;
@@ -2488,7 +2488,7 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj)
 		return 0;
 
 	i915_gem_object_update_fence(obj, reg, enable);
-	obj->tiling_changed = false;
+	obj->fence_dirty = false;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 1a93066..c9786cd 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -355,6 +355,11 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 		 * no longer meets the alignment restrictions for its new
 		 * tiling mode. Otherwise we can just leave it alone, but
 		 * need to ensure that any fence register is cleared.
+		 *
+		 * After updating the tiling parameters, we then flag whether
+		 * we need to update an associated fence register. Note this
+		 * has to also include the unfenced register the GPU uses
+		 * whilst executing a fenced command for an untiled object.
 		 */
 		i915_gem_release_mmap(obj);
 
@@ -374,7 +379,10 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 		}
 
 		if (ret == 0) {
-			obj->tiling_changed = true;
+			obj->fence_dirty =
+				obj->fenced_gpu_access ||
+				obj->fence_reg != I915_FENCE_REG_NONE;
+
 			obj->tiling_mode = args->tiling_mode;
 			obj->stride = args->stride;
 		}
-- 
1.7.10