All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 10/22] drm/i915: remove LP_RING&friends from modeset code
Date: Mon, 23 Apr 2012 16:50:57 +0200	[thread overview]
Message-ID: <1335192669-10805-11-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1335192669-10805-1-git-send-email-daniel.vetter@ffwll.ch>

The LP refers to 'low priority' as opposed to the high priority
ring on gen2/3. So lets constrain its use to the code of that era.

Unfortunately we can't yet completely remove the associated
macros from common headers and shove them into i915_dma.c to
the other dri1 legacy support code, a few cleanups are still
missing for that.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c |   78 ++++++++++++++++++----------------
 drivers/gpu/drm/i915/intel_overlay.c |   58 ++++++++++++++-----------
 drivers/gpu/drm/i915/intel_pm.c      |   27 ++++++------
 3 files changed, 87 insertions(+), 76 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f17046c..4a90ed3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5648,16 +5648,17 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	unsigned long offset;
 	u32 flip_mask;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
-	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
 		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
 
-	ret = BEGIN_LP_RING(6);
+	ret = intel_ring_begin(ring, 6);
 	if (ret)
 		goto err_unpin;
 
@@ -5668,14 +5669,14 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
 	else
 		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
-	OUT_RING(MI_NOOP);
-	OUT_RING(MI_DISPLAY_FLIP |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitches[0]);
-	OUT_RING(obj->gtt_offset + offset);
-	OUT_RING(0); /* aux display base address, unused */
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_emit(ring, MI_DISPLAY_FLIP |
+			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	intel_ring_emit(ring, fb->pitches[0]);
+	intel_ring_emit(ring, obj->gtt_offset + offset);
+	intel_ring_emit(ring, 0); /* aux display base address, unused */
+	intel_ring_advance(ring);
 	return 0;
 
 err_unpin:
@@ -5693,16 +5694,17 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	unsigned long offset;
 	u32 flip_mask;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
-	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
 		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
 
-	ret = BEGIN_LP_RING(6);
+	ret = intel_ring_begin(ring, 6);
 	if (ret)
 		goto err_unpin;
 
@@ -5710,15 +5712,15 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
 	else
 		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
-	OUT_RING(MI_NOOP);
-	OUT_RING(MI_DISPLAY_FLIP_I915 |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitches[0]);
-	OUT_RING(obj->gtt_offset + offset);
-	OUT_RING(MI_NOOP);
-
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
+			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	intel_ring_emit(ring, fb->pitches[0]);
+	intel_ring_emit(ring, obj->gtt_offset + offset);
+	intel_ring_emit(ring, MI_NOOP);
+
+	intel_ring_advance(ring);
 	return 0;
 
 err_unpin:
@@ -5735,13 +5737,14 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	uint32_t pf, pipesrc;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
-	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
 		goto err;
 
-	ret = BEGIN_LP_RING(4);
+	ret = intel_ring_begin(ring, 4);
 	if (ret)
 		goto err_unpin;
 
@@ -5749,10 +5752,10 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	 * Display Registers (which do not change across a page-flip)
 	 * so we need only reprogram the base address.
 	 */
-	OUT_RING(MI_DISPLAY_FLIP |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitches[0]);
-	OUT_RING(obj->gtt_offset | obj->tiling_mode);
+	intel_ring_emit(ring, MI_DISPLAY_FLIP |
+			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	intel_ring_emit(ring, fb->pitches[0]);
+	intel_ring_emit(ring, obj->gtt_offset | obj->tiling_mode);
 
 	/* XXX Enabling the panel-fitter across page-flip is so far
 	 * untested on non-native modes, so ignore it for now.
@@ -5760,8 +5763,8 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	 */
 	pf = 0;
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
-	OUT_RING(pf | pipesrc);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, pf | pipesrc);
+	intel_ring_advance(ring);
 	return 0;
 
 err_unpin:
@@ -5777,26 +5780,27 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	uint32_t pf, pipesrc;
 	int ret;
 
-	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
 		goto err;
 
-	ret = BEGIN_LP_RING(4);
+	ret = intel_ring_begin(ring, 4);
 	if (ret)
 		goto err_unpin;
 
-	OUT_RING(MI_DISPLAY_FLIP |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitches[0] | obj->tiling_mode);
-	OUT_RING(obj->gtt_offset);
+	intel_ring_emit(ring, MI_DISPLAY_FLIP |
+			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
+	intel_ring_emit(ring, obj->gtt_offset);
 
 	pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
-	OUT_RING(pf | pipesrc);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, pf | pipesrc);
+	intel_ring_advance(ring);
 	return 0;
 
 err_unpin:
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index aa14235..9c16083 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -215,17 +215,18 @@ static int intel_overlay_do_wait_request(struct intel_overlay *overlay,
 {
 	struct drm_device *dev = overlay->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
 	BUG_ON(overlay->last_flip_req);
-	ret = i915_add_request(LP_RING(dev_priv), NULL, request);
+	ret = i915_add_request(ring, NULL, request);
 	if (ret) {
 	    kfree(request);
 	    return ret;
 	}
 	overlay->last_flip_req = request->seqno;
 	overlay->flip_tail = tail;
-	ret = i915_wait_request(LP_RING(dev_priv), overlay->last_flip_req,
+	ret = i915_wait_request(ring, overlay->last_flip_req,
 				true);
 	if (ret)
 		return ret;
@@ -287,6 +288,7 @@ static int intel_overlay_on(struct intel_overlay *overlay)
 {
 	struct drm_device *dev = overlay->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	struct drm_i915_gem_request *request;
 	int pipe_a_quirk = 0;
 	int ret;
@@ -306,17 +308,17 @@ static int intel_overlay_on(struct intel_overlay *overlay)
 		goto out;
 	}
 
-	ret = BEGIN_LP_RING(4);
+	ret = intel_ring_begin(ring, 4);
 	if (ret) {
 		kfree(request);
 		goto out;
 	}
 
-	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_ON);
-	OUT_RING(overlay->flip_addr | OFC_UPDATE);
-	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
-	OUT_RING(MI_NOOP);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_ON);
+	intel_ring_emit(ring, overlay->flip_addr | OFC_UPDATE);
+	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
 
 	ret = intel_overlay_do_wait_request(overlay, request, NULL);
 out:
@@ -332,6 +334,7 @@ static int intel_overlay_continue(struct intel_overlay *overlay,
 {
 	struct drm_device *dev = overlay->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	struct drm_i915_gem_request *request;
 	u32 flip_addr = overlay->flip_addr;
 	u32 tmp;
@@ -351,16 +354,16 @@ static int intel_overlay_continue(struct intel_overlay *overlay,
 	if (tmp & (1 << 17))
 		DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp);
 
-	ret = BEGIN_LP_RING(2);
+	ret = intel_ring_begin(ring, 2);
 	if (ret) {
 		kfree(request);
 		return ret;
 	}
-	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
-	OUT_RING(flip_addr);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
+	intel_ring_emit(ring, flip_addr);
+	intel_ring_advance(ring);
 
-	ret = i915_add_request(LP_RING(dev_priv), NULL, request);
+	ret = i915_add_request(ring, NULL, request);
 	if (ret) {
 		kfree(request);
 		return ret;
@@ -401,6 +404,7 @@ static int intel_overlay_off(struct intel_overlay *overlay)
 {
 	struct drm_device *dev = overlay->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	u32 flip_addr = overlay->flip_addr;
 	struct drm_i915_gem_request *request;
 	int ret;
@@ -417,20 +421,20 @@ static int intel_overlay_off(struct intel_overlay *overlay)
 	 * of the hw. Do it in both cases */
 	flip_addr |= OFC_UPDATE;
 
-	ret = BEGIN_LP_RING(6);
+	ret = intel_ring_begin(ring, 6);
 	if (ret) {
 		kfree(request);
 		return ret;
 	}
 	/* wait for overlay to go idle */
-	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
-	OUT_RING(flip_addr);
-	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
+	intel_ring_emit(ring, flip_addr);
+	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
 	/* turn overlay off */
-	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
-	OUT_RING(flip_addr);
-	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
+	intel_ring_emit(ring, flip_addr);
+	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	intel_ring_advance(ring);
 
 	return intel_overlay_do_wait_request(overlay, request,
 					     intel_overlay_off_tail);
@@ -442,12 +446,13 @@ static int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay)
 {
 	struct drm_device *dev = overlay->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
 	if (overlay->last_flip_req == 0)
 		return 0;
 
-	ret = i915_wait_request(LP_RING(dev_priv), overlay->last_flip_req,
+	ret = i915_wait_request(ring, overlay->last_flip_req,
 				true);
 	if (ret)
 		return ret;
@@ -467,6 +472,7 @@ static int intel_overlay_release_old_vid(struct intel_overlay *overlay)
 {
 	struct drm_device *dev = overlay->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
 	/* Only wait if there is actually an old frame to release to
@@ -483,15 +489,15 @@ static int intel_overlay_release_old_vid(struct intel_overlay *overlay)
 		if (request == NULL)
 			return -ENOMEM;
 
-		ret = BEGIN_LP_RING(2);
+		ret = intel_ring_begin(ring, 2);
 		if (ret) {
 			kfree(request);
 			return ret;
 		}
 
-		OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
-		OUT_RING(MI_NOOP);
-		ADVANCE_LP_RING();
+		intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_advance(ring);
 
 		ret = intel_overlay_do_wait_request(overlay, request,
 						    intel_overlay_release_old_vid_tail);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a2d2ce4..87029bb 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2436,6 +2436,7 @@ static int ironlake_setup_rc6(struct drm_device *dev)
 void ironlake_enable_rc6(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
 
 	/* rc6 disabled by default due to repeated reports of hanging during
@@ -2455,31 +2456,31 @@ void ironlake_enable_rc6(struct drm_device *dev)
 	 * GPU can automatically power down the render unit if given a page
 	 * to save state.
 	 */
-	ret = BEGIN_LP_RING(6);
+	ret = intel_ring_begin(ring, 6);
 	if (ret) {
 		ironlake_teardown_rc6(dev);
 		mutex_unlock(&dev->struct_mutex);
 		return;
 	}
 
-	OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
-	OUT_RING(MI_SET_CONTEXT);
-	OUT_RING(dev_priv->renderctx->gtt_offset |
-		 MI_MM_SPACE_GTT |
-		 MI_SAVE_EXT_STATE_EN |
-		 MI_RESTORE_EXT_STATE_EN |
-		 MI_RESTORE_INHIBIT);
-	OUT_RING(MI_SUSPEND_FLUSH);
-	OUT_RING(MI_NOOP);
-	OUT_RING(MI_FLUSH);
-	ADVANCE_LP_RING();
+	intel_ring_emit(ring, MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
+	intel_ring_emit(ring, MI_SET_CONTEXT);
+	intel_ring_emit(ring, dev_priv->renderctx->gtt_offset |
+			MI_MM_SPACE_GTT |
+			MI_SAVE_EXT_STATE_EN |
+			MI_RESTORE_EXT_STATE_EN |
+			MI_RESTORE_INHIBIT);
+	intel_ring_emit(ring, MI_SUSPEND_FLUSH);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_emit(ring, MI_FLUSH);
+	intel_ring_advance(ring);
 
 	/*
 	 * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
 	 * does an implicit flush, combined with MI_FLUSH above, it should be
 	 * safe to assume that renderctx is valid
 	 */
-	ret = intel_wait_ring_idle(LP_RING(dev_priv));
+	ret = intel_wait_ring_idle(ring);
 	if (ret) {
 		DRM_ERROR("failed to enable ironlake power power savings\n");
 		ironlake_teardown_rc6(dev);
-- 
1.7.7.6

  parent reply	other threads:[~2012-04-23 15:55 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-23 14:50 [PATCH 00/22] dri1 dragon slaughtering Daniel Vetter
2012-04-23 14:50 ` [PATCH 01/22] drm/i915: properly check for MODESET for kms driver ioctls Daniel Vetter
2012-04-23 22:23   ` Chris Wilson
2012-04-24  6:19     ` [PATCH] " Daniel Vetter
2012-04-24  8:21       ` Chris Wilson
2012-04-24  7:55         ` Daniel Vetter
2012-04-24  9:25           ` Chris Wilson
2012-04-24  9:41           ` Chris Wilson
2012-04-24  7:19     ` [PATCH 01/22] " Daniel Vetter
2012-04-23 14:50 ` [PATCH 02/22] drm/i915: disallow gem ums init ioctl for kms Daniel Vetter
2012-04-23 22:25   ` Chris Wilson
2012-04-24  6:22     ` [PATCH] " Daniel Vetter
2012-04-23 14:50 ` [PATCH 03/22] drm/i915: rip out GEM drm feature checks Daniel Vetter
2012-04-23 22:28   ` Chris Wilson
2012-04-23 14:50 ` [PATCH 04/22] drm/i915: rip out dev_priv->has_gem Daniel Vetter
2012-04-23 22:29   ` Chris Wilson
2012-04-23 14:50 ` [PATCH 05/22] drm/i915: check for kms in dri1 ioctls Daniel Vetter
2012-04-23 22:31   ` Chris Wilson
2012-04-24  6:29     ` [PATCH] " Daniel Vetter
2012-04-25  9:56       ` Daniel Vetter
2012-04-23 14:50 ` [PATCH 06/22] drm/i915: move dri1 vblank stubs to i915_dma.c Daniel Vetter
2012-04-24  6:35   ` [PATCH] " Daniel Vetter
2012-04-23 14:50 ` [PATCH 07/22] drm/i915: create dev_priv->dri1 dragon dungeon^W^W sub-struct Daniel Vetter
2012-04-23 14:50 ` [PATCH 08/22] drm/i915 disallow physical batchbuffers for KMS Daniel Vetter
2012-04-23 14:50 ` [PATCH 09/22] drm/i915: rip out dev_priv->tex_lru_log_granularity Daniel Vetter
2012-04-23 14:50 ` Daniel Vetter [this message]
2012-04-23 22:36   ` [PATCH 10/22] drm/i915: remove LP_RING&friends from modeset code Chris Wilson
2012-04-23 14:50 ` [PATCH 11/22] drm/i915: kill intel_clear_scanline_wait Daniel Vetter
2012-04-23 22:39   ` Chris Wilson
2012-04-23 14:50 ` [PATCH 12/22] drm/i915: rip out dri1 breadcrumb updates from gen5+ irq handlers Daniel Vetter
2012-04-23 22:40   ` Chris Wilson
2012-04-23 14:51 ` [PATCH 13/22] drm/i915: move dri1 irq ioctl code to i915_dma.c Daniel Vetter
2012-04-23 22:41   ` Chris Wilson
2012-04-24  6:37     ` [PATCH] " Daniel Vetter
2012-04-23 14:51 ` [PATCH 14/22] drm/i915: extract dri1 breadcrumb update from irq handler Daniel Vetter
2012-04-23 22:41   ` Chris Wilson
2012-04-23 14:51 ` [PATCH 15/22] drm/i915: move LP_RING&friends to i915_dma.c Daniel Vetter
2012-04-23 22:44   ` Chris Wilson
2012-04-23 14:51 ` [PATCH 16/22] drm/i915: disallow clip rects on gen5+ Daniel Vetter
2012-04-23 14:51 ` [PATCH 17/22] drm/i915: move the ips code to intel_pm.c Daniel Vetter
2012-04-23 14:51 ` [PATCH 18/22] drm/i915: move rps/emon function declarations Daniel Vetter
2012-04-23 14:51 ` [PATCH 19/22] drm/i915: kill pointless clearing of dev_priv->hws_map Daniel Vetter
2012-04-23 22:46   ` Chris Wilson
2012-04-23 14:51 ` [PATCH 20/22] drm/i915: rework legacy GFX HWS handling Daniel Vetter
2012-04-23 14:51 ` [PATCH 21/22] drm/i915: fixup __iomem mixups in ringbuffer.c Daniel Vetter
2012-04-23 14:51 ` [PATCH 22/22] drm/i915: move pnv|ilk_gem_mem_freq to intel_pm.c Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1335192669-10805-11-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.