From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH 10/22] m68knommu: switch to GPIO init macros in ColdFire 5407 init code Date: Thu, 26 Apr 2012 10:25:50 +1000 Message-ID: <1335399962-10308-11-git-send-email-gerg@snapgear.com> References: <1335399962-10308-1-git-send-email-gerg@snapgear.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from sncsmrelay2.nai.com ([67.97.80.206]:28249 "EHLO sncsmrelay2.nai.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932622Ab2DZA1H (ORCPT ); Wed, 25 Apr 2012 20:27:07 -0400 In-Reply-To: <1335399962-10308-1-git-send-email-gerg@snapgear.com> Sender: linux-m68k-owner@vger.kernel.org List-Id: linux-m68k@vger.kernel.org To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org, sfking@fdwdc.com Cc: Greg Ungerer From: Greg Ungerer Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer --- arch/m68k/platform/5407/gpio.c | 16 +--------------- 1 files changed, 1 insertions(+), 15 deletions(-) diff --git a/arch/m68k/platform/5407/gpio.c b/arch/m68k/platform/5407/gpio.c index 5850612..91d0420 100644 --- a/arch/m68k/platform/5407/gpio.c +++ b/arch/m68k/platform/5407/gpio.c @@ -21,21 +21,7 @@ #include static struct mcf_gpio_chip mcf_gpio_chips[] = { - { - .gpio_chip = { - .label = "PP", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value, - .ngpio = 16, - }, - .pddr = (void __iomem *) MCFSIM_PADDR, - .podr = (void __iomem *) MCFSIM_PADAT, - .ppdr = (void __iomem *) MCFSIM_PADAT, - }, + MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT), }; static int __init mcf_gpio_init(void) -- 1.7.0.4