From mboxrd@z Thu Jan 1 00:00:00 1970 From: chao.xie@marvell.com (Chao Xie) Date: Mon, 7 May 2012 11:22:23 +0800 Subject: [PATCH V2 2/2] ARM: mmp: add PM support for mmp2 In-Reply-To: <1336360943-16862-1-git-send-email-chao.xie@marvell.com> References: <1336360943-16862-1-git-send-email-chao.xie@marvell.com> Message-ID: <1336360943-16862-2-git-send-email-chao.xie@marvell.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org MMP2 can enter system sleep level during suspend. It can be waken up by PMIC interrupt, RTC/ALARM. Signed-off-by: Chao Xie --- arch/arm/mach-mmp/Makefile | 4 + arch/arm/mach-mmp/include/mach/pm-mmp2.h | 61 +++++++ arch/arm/mach-mmp/irq.c | 7 + arch/arm/mach-mmp/pm-mmp2.c | 264 ++++++++++++++++++++++++++++++ 4 files changed, 336 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/pm-mmp2.h create mode 100644 arch/arm/mach-mmp/pm-mmp2.c diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b920b9b..7d60cef 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -9,6 +9,10 @@ obj-$(CONFIG_CPU_PXA168) += pxa168.o obj-$(CONFIG_CPU_PXA910) += pxa910.o obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o +ifeq ($(CONFIG_PM),y) +obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o +endif + # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/include/mach/pm-mmp2.h new file mode 100644 index 0000000..98bd66c --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/pm-mmp2.h @@ -0,0 +1,61 @@ +/* + * MMP2 Power Management Routines + * + * This software program is licensed subject to the GNU General Public License + * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html + * + * (C) Copyright 2010 Marvell International Ltd. + * All Rights Reserved + */ + +#ifndef __MMP2_PM_H__ +#define __MMP2_PM_H__ + +#include + +#define APMU_PJ_IDLE_CFG APMU_REG(0x018) +#define APMU_PJ_IDLE_CFG_PJ_IDLE (1 << 1) +#define APMU_PJ_IDLE_CFG_PJ_PWRDWN (1 << 5) +#define APMU_PJ_IDLE_CFG_PWR_SW(x) ((x) << 16) +#define APMU_PJ_IDLE_CFG_L2_PWR_SW (1 << 19) +#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK (3 << 28) + +#define APMU_SRAM_PWR_DWN APMU_REG(0x08c) + +#define MPMU_SCCR MPMU_REG(0x038) +#define MPMU_PCR_PJ MPMU_REG(0x1000) +#define MPMU_PCR_PJ_AXISD (1 << 31) +#define MPMU_PCR_PJ_SLPEN (1 << 29) +#define MPMU_PCR_PJ_SPSD (1 << 28) +#define MPMU_PCR_PJ_DDRCORSD (1 << 27) +#define MPMU_PCR_PJ_APBSD (1 << 26) +#define MPMU_PCR_PJ_INTCLR (1 << 24) +#define MPMU_PCR_PJ_SLPWP0 (1 << 23) +#define MPMU_PCR_PJ_SLPWP1 (1 << 22) +#define MPMU_PCR_PJ_SLPWP2 (1 << 21) +#define MPMU_PCR_PJ_SLPWP3 (1 << 20) +#define MPMU_PCR_PJ_VCTCXOSD (1 << 19) +#define MPMU_PCR_PJ_SLPWP4 (1 << 18) +#define MPMU_PCR_PJ_SLPWP5 (1 << 17) +#define MPMU_PCR_PJ_SLPWP6 (1 << 16) +#define MPMU_PCR_PJ_SLPWP7 (1 << 15) + +#define MPMU_PLL2_CTRL1 MPMU_REG(0x0414) +#define MPMU_CGR_PJ MPMU_REG(0x1024) +#define MPMU_WUCRM_PJ MPMU_REG(0x104c) +#define MPMU_WUCRM_PJ_WAKEUP(x) (1 << (x)) +#define MPMU_WUCRM_PJ_RTC_ALARM (1 << 17) + +enum { + POWER_MODE_ACTIVE = 0, + POWER_MODE_CORE_INTIDLE, + POWER_MODE_CORE_EXTIDLE, + POWER_MODE_APPS_IDLE, + POWER_MODE_APPS_SLEEP, + POWER_MODE_CHIP_SLEEP, + POWER_MODE_SYS_SLEEP, +}; + +extern void mmp2_pm_enter_lowpower_mode(int state); +extern int mmp2_set_wake(struct irq_data *d, unsigned int on); +#endif diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index 3705470..04935f1 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -23,6 +23,10 @@ #include +#ifdef CONFIG_CPU_MMP2 +#include +#endif + #include "common.h" #define MAX_ICU_NR 16 @@ -305,6 +309,9 @@ void __init mmp2_init_icu(void) set_irq_flags(irq, IRQF_VALID); } irq_set_default_host(icu_data[0].domain); +#ifdef CONFIG_CPU_MMP2 + icu_irq_chip.irq_set_wake = mmp2_set_wake; +#endif } #ifdef CONFIG_OF diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c new file mode 100644 index 0000000..461a191 --- /dev/null +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -0,0 +1,264 @@ +/* + * MMP2 Power Management Routines + * + * This software program is licensed subject to the GNU General Public License + * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html + * + * (C) Copyright 2012 Marvell International Ltd. + * All Rights Reserved + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int mmp2_set_wake(struct irq_data *d, unsigned int on) +{ + int irq = d->irq; + struct irq_desc *desc = irq_to_desc(irq); + unsigned long data = 0; + + if (unlikely(irq >= nr_irqs)) { + pr_err("IRQ nubmers are out of boundary!\n"); + return -EINVAL; + } + + if (on) { + if (desc->action) + desc->action->flags |= IRQF_NO_SUSPEND; + } else { + if (desc->action) + desc->action->flags &= ~IRQF_NO_SUSPEND; + } + + /* enable wakeup sources */ + switch (irq) { + case IRQ_MMP2_RTC: + case IRQ_MMP2_RTC_ALARM: + data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM; + break; + case IRQ_MMP2_PMIC: + data = MPMU_WUCRM_PJ_WAKEUP(7); + break; + case IRQ_MMP2_MMC2: + /* mmc use WAKEUP2, same as GPIO wakeup source */ + data = MPMU_WUCRM_PJ_WAKEUP(2); + break; + } + if (on) { + if (data) { + data |= __raw_readl(MPMU_WUCRM_PJ); + __raw_writel(data, MPMU_WUCRM_PJ); + } + } else { + if (data) { + data = ~data & __raw_readl(MPMU_WUCRM_PJ); + __raw_writel(data, MPMU_WUCRM_PJ); + } + } + return 0; +} + +static void pm_scu_clk_disable(void) +{ + unsigned int val; + + /* close AXI fabric clock gate */ + __raw_writel(0x0, CIU_REG(0x64)); + __raw_writel(0x0, CIU_REG(0x68)); + + /* close MCB master clock gate */ + val = __raw_readl(CIU_REG(0x1c)); + val |= 0xf0; + __raw_writel(val, CIU_REG(0x1c)); + + return ; +} + +static void pm_scu_clk_enable(void) +{ + unsigned int val; + + /* open AXI fabric clock gate */ + __raw_writel(0x03003003, CIU_REG(0x64)); + __raw_writel(0x00303030, CIU_REG(0x68)); + + /* open MCB master clock gate */ + val = __raw_readl(CIU_REG(0x1c)); + val &= ~(0xf0); + __raw_writel(val, CIU_REG(0x1c)); + + return ; +} + +static void pm_mpmu_clk_disable(void) +{ + /* + * disable clocks in MPMU_CGR_PJ register + * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M + */ + __raw_writel(0x0000a010, MPMU_CGR_PJ); +} + +static void pm_mpmu_clk_enable(void) +{ + unsigned int val; + + __raw_writel(0xdffefffe, MPMU_CGR_PJ); + val = __raw_readl(MPMU_PLL2_CTRL1); + val |= (1 << 29); + __raw_writel(val, MPMU_PLL2_CTRL1); + + return ; +} + +void mmp2_pm_enter_lowpower_mode(int state) +{ + uint32_t idle_cfg, apcr; + + idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG); + apcr = __raw_readl(MPMU_PCR_PJ); + apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD + | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13)); + idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE; + + switch (state) { + case POWER_MODE_SYS_SLEEP: + apcr |= MPMU_PCR_PJ_SLPEN; /* set the SLPEN bit */ + apcr |= MPMU_PCR_PJ_VCTCXOSD; /* set VCTCXOSD */ + /* fall through */ + case POWER_MODE_CHIP_SLEEP: + apcr |= MPMU_PCR_PJ_SLPEN; + /* fall through */ + case POWER_MODE_APPS_SLEEP: + apcr |= MPMU_PCR_PJ_APBSD; /* set APBSD */ + /* fall through */ + case POWER_MODE_APPS_IDLE: + apcr |= MPMU_PCR_PJ_AXISD; /* set AXISDD bit */ + apcr |= MPMU_PCR_PJ_DDRCORSD; /* set DDRCORSD bit */ + idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN; /* PJ power down */ + apcr |= MPMU_PCR_PJ_SPSD; + /* fall through */ + case POWER_MODE_CORE_EXTIDLE: + idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE; /* set the IDLE bit */ + idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK; + idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3) + | APMU_PJ_IDLE_CFG_L2_PWR_SW; + break; + case POWER_MODE_CORE_INTIDLE: + apcr &= ~MPMU_PCR_PJ_SPSD; + break; + } + + /* set reserve bits */ + apcr |= (1 << 30) | (1 << 25); + + /* finally write the registers back */ + __raw_writel(idle_cfg, APMU_PJ_IDLE_CFG); + __raw_writel(apcr, MPMU_PCR_PJ); /* 0xfe086000 */ +} + +static int mmp2_pm_enter(suspend_state_t state) +{ + int temp; + + temp = __raw_readl(MMP2_ICU_INT4_MASK); + if (temp & (1 << 1)) { + printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__); + return -EAGAIN; + } + + temp = __raw_readl(APMU_SRAM_PWR_DWN); + temp |= ((1 << 19) | (1 << 18)); + __raw_writel(temp, APMU_SRAM_PWR_DWN); + pm_mpmu_clk_disable(); + pm_scu_clk_disable(); + + printk(KERN_INFO "%s: before suspend\n", __func__); + cpu_do_idle(); + printk(KERN_INFO "%s: after suspend\n", __func__); + + pm_mpmu_clk_enable(); /* enable clocks in MPMU */ + pm_scu_clk_enable(); /* enable clocks in SCU */ + + return 0; +} + +/* + * Called after processes are frozen, but before we shut down devices. + */ +static int mmp2_pm_prepare(void) +{ + mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP); + + return 0; +} + +/* + * Called after devices are re-setup, but before processes are thawed. + */ +static void mmp2_pm_finish(void) +{ + mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE); +} + +static int mmp2_pm_valid(suspend_state_t state) +{ + return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM)); +} + +/* + * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. + */ +static const struct platform_suspend_ops mmp2_pm_ops = { + .valid = mmp2_pm_valid, + .prepare = mmp2_pm_prepare, + .enter = mmp2_pm_enter, + .finish = mmp2_pm_finish, +}; + +static int __init mmp2_pm_init(void) +{ + uint32_t apcr; + + if (!cpu_is_mmp2()) + return -EIO; + + suspend_set_ops(&mmp2_pm_ops); + + /* + * Set bit 0, Slow clock Select 32K clock input instead of VCXO + * VCXO is chosen by default, which would be disabled in suspend + */ + __raw_writel(0x5, MPMU_SCCR); + + /* + * Clear bit 23 of CIU_CPU_CONF + * direct PJ4 to DDR access through Memory Controller slow queue + * fast queue has issue and cause lcd will flick + */ + __raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8)); + + /* Clear default low power control bit */ + apcr = __raw_readl(MPMU_PCR_PJ); + apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD + | MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13); + __raw_writel(apcr, MPMU_PCR_PJ); + + return 0; +} + +late_initcall(mmp2_pm_init); -- 1.7.0.4