From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.free-electrons.com ([88.190.12.23]:45297 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755047Ab2EIJGu (ORCPT ); Wed, 9 May 2012 05:06:50 -0400 From: Maxime Ripard To: linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: thomas@free-electrons.com, patrice.vilchez@atmel.com, nicolas.ferre@atmel.com, plagnioj@jcrosoft.com Subject: [PATCH 3/9] ARM: AT91: Add the ADC to the sam9g20ek board Date: Wed, 9 May 2012 11:06:00 +0200 Message-Id: <1336554366-16957-4-git-send-email-maxime.ripard@free-electrons.com> In-Reply-To: <1336554366-16957-1-git-send-email-maxime.ripard@free-electrons.com> References: <1336554366-16957-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org This patch adds platform data for the AT91 ADC driver support for the AT91SAM9G20-EK board. Signed-off-by: Maxime Ripard --- arch/arm/mach-at91/at91sam9260.c | 8 +++ arch/arm/mach-at91/at91sam9260_devices.c | 89 ++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-sam9g20ek.c | 14 +++++ 3 files changed, 111 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 46f7742..63d4432 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -55,6 +55,13 @@ static struct clk adc_clk = { .pmc_mask = 1 << AT91SAM9260_ID_ADC, .type = CLK_TYPE_PERIPHERAL, }; + +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 5000000, +}; + static struct clk usart0_clk = { .name = "usart0_clk", .pmc_mask = 1 << AT91SAM9260_ID_US0, @@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = { &pioB_clk, &pioC_clk, &adc_clk, + &adc_op_clk, &usart0_clk, &usart1_clk, &usart2_clk, diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5652dde..2125851 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -17,6 +17,8 @@ #include #include +#include + #include #include #include @@ -1369,6 +1371,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data) void __init at91_add_device_cf(struct at91_cf_data * data) {} #endif +/* -------------------------------------------------------------------- + * ADCs + * -------------------------------------------------------------------- */ + +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; + +static struct resource adc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_ADC, + .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_ADC, + .end = AT91SAM9260_ID_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_adc_device = { + .name = "at91_adc", + .id = -1, + .dev = { + .platform_data = &adc_data, + }, + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), +}; + +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "timer-counter-0", + .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN, + }, + [1] = { + .name = "timer-counter-1", + .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN, + }, + [2] = { + .name = "timer-counter-2", + .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN, + }, + [3] = { + .name = "external", + .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN, + .is_external = true, + }, +}; + +static struct at91_adc_reg_desc at91_adc_register_g20 = { + .channel_base = AT91_ADC_CHR(0), + .drdy_mask = AT91_ADC_DRDY, + .status_register = AT91_ADC_SR, + .trigger_register = AT91_ADC_MR, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) +{ + if (!data) + return; + + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC0, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC1, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC2, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC3, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PA22, 0); + + data->num_channels = 4; + data->startup_time = 10; + data->registers = &at91_adc_register_g20; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); +} +#else +void __init at91_add_device_adc(struct at91_adc_data *data) {} +#endif + /* -------------------------------------------------------------------- */ /* * These devices are always present and don't need any board-specific diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 8923ec9..291b0fe 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -318,6 +320,16 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * ADCs + */ + +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), + .use_external_triggers = true, + .vref = 3300, +}; + #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), @@ -393,6 +405,8 @@ static void __init ek_board_init(void) ek_add_device_gpio_leds(); /* Push Buttons */ ek_add_device_buttons(); + /* ADCs */ + at91_add_device_adc(&ek_adc_data); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 9 May 2012 11:06:00 +0200 Subject: [PATCH 3/9] ARM: AT91: Add the ADC to the sam9g20ek board In-Reply-To: <1336554366-16957-1-git-send-email-maxime.ripard@free-electrons.com> References: <1336554366-16957-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1336554366-16957-4-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds platform data for the AT91 ADC driver support for the AT91SAM9G20-EK board. Signed-off-by: Maxime Ripard --- arch/arm/mach-at91/at91sam9260.c | 8 +++ arch/arm/mach-at91/at91sam9260_devices.c | 89 ++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-sam9g20ek.c | 14 +++++ 3 files changed, 111 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 46f7742..63d4432 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -55,6 +55,13 @@ static struct clk adc_clk = { .pmc_mask = 1 << AT91SAM9260_ID_ADC, .type = CLK_TYPE_PERIPHERAL, }; + +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 5000000, +}; + static struct clk usart0_clk = { .name = "usart0_clk", .pmc_mask = 1 << AT91SAM9260_ID_US0, @@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = { &pioB_clk, &pioC_clk, &adc_clk, + &adc_op_clk, &usart0_clk, &usart1_clk, &usart2_clk, diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5652dde..2125851 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -17,6 +17,8 @@ #include #include +#include + #include #include #include @@ -1369,6 +1371,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data) void __init at91_add_device_cf(struct at91_cf_data * data) {} #endif +/* -------------------------------------------------------------------- + * ADCs + * -------------------------------------------------------------------- */ + +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; + +static struct resource adc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_ADC, + .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_ADC, + .end = AT91SAM9260_ID_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_adc_device = { + .name = "at91_adc", + .id = -1, + .dev = { + .platform_data = &adc_data, + }, + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), +}; + +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "timer-counter-0", + .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN, + }, + [1] = { + .name = "timer-counter-1", + .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN, + }, + [2] = { + .name = "timer-counter-2", + .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN, + }, + [3] = { + .name = "external", + .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN, + .is_external = true, + }, +}; + +static struct at91_adc_reg_desc at91_adc_register_g20 = { + .channel_base = AT91_ADC_CHR(0), + .drdy_mask = AT91_ADC_DRDY, + .status_register = AT91_ADC_SR, + .trigger_register = AT91_ADC_MR, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) +{ + if (!data) + return; + + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC0, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC1, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC2, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC3, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PA22, 0); + + data->num_channels = 4; + data->startup_time = 10; + data->registers = &at91_adc_register_g20; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); +} +#else +void __init at91_add_device_adc(struct at91_adc_data *data) {} +#endif + /* -------------------------------------------------------------------- */ /* * These devices are always present and don't need any board-specific diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 8923ec9..291b0fe 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -318,6 +320,16 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * ADCs + */ + +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), + .use_external_triggers = true, + .vref = 3300, +}; + #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), @@ -393,6 +405,8 @@ static void __init ek_board_init(void) ek_add_device_gpio_leds(); /* Push Buttons */ ek_add_device_buttons(); + /* ADCs */ + at91_add_device_adc(&ek_adc_data); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ -- 1.7.9.5