From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 7/7] ARM: dts: imx6q-sabrelite: add usb devices
Date: Tue, 15 May 2012 21:58:23 +0800 [thread overview]
Message-ID: <1337090303-16046-8-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1337090303-16046-1-git-send-email-richard.zhao@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
arch/arm/boot/dts/imx6q-sabrelite.dts | 19 +++++++++++++-
arch/arm/boot/dts/imx6q.dtsi | 44 +++++++++++++++++++++++++++++++-
2 files changed, 60 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 2f631f2..ccc794e 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -41,10 +41,27 @@
status = "okay";
};
};
-
+ iomuxc at 020e0000 {
+ gpios {
+ pinctrl_gpio_hog: gpiohog {
+ fsl,pins = <1044 0x80000000
+ 144 0x80000000>; /* MX6Q_PAD_GPIO_17__GPIO_7_12 */
+ };
+ };
+ };
};
aips-bus at 02100000 { /* AIPS2 */
+ usboh3 at 02184000 { /* USB OTG */
+ fsl,vbus-power = <&gpio3 22 0>;
+ status = "okay";
+ };
+
+ usboh3 at 02184200 { /* USB1 */
+ fsl,hub-reset = <&gpio7 12 0>;
+ status = "okay";
+ };
+
ethernet at 02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index b5a15c4..863cb74 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -444,12 +444,14 @@
};
};
- usbphy at 020c9000 { /* USBPHY1 */
+ usbphy1: usbphy at 020c9000 {
+ compatible = "fsl,imx6q-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
};
- usbphy at 020ca000 { /* USBPHY2 */
+ usbphy2: usbphy at 020ca000 {
+ compatible = "fsl,imx6q-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
};
@@ -485,7 +487,15 @@
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_hog>;
+
/* shared pinctrl settings */
+ gpios {
+ pinctrl_gpio_hog: gpiohog {
+ };
+ };
+
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
@@ -550,6 +560,36 @@
reg = <0x0217c000 0x4000>;
};
+ usboh3 at 02184000 { /* USB OTG */
+ compatible = "fsl,imx6q-usboh3";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ fsl,usbphy = <&usbphy1>;
+ status = "disabled";
+ };
+
+ usboh3 at 02184200 { /* USB1 */
+ compatible = "fsl,imx6q-usboh3";
+ reg = <0x02184200 0x200>;
+ interrupts = <0 40 0x04>;
+ fsl,usbphy = <&usbphy2>;
+ status = "disabled";
+ };
+
+ usboh3 at 02184400 { /* USB2 */
+ compatible = "fsl,imx6q-usboh3";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 41 0x04>;
+ status = "disabled";
+ };
+
+ usboh3 at 02184600 { /* USB3 */
+ compatible = "fsl,imx6q-usboh3";
+ reg = <0x02184600 0x200>;
+ interrupts = <0 42 0x04>;
+ status = "disabled";
+ };
+
ethernet at 02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
--
1.7.5.4
next prev parent reply other threads:[~2012-05-15 13:58 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-15 13:58 [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support Richard Zhao
2012-05-15 13:58 ` [PATCH v1 1/7] usb: chipidea: permit user select USB_EHCI_ROOT_HUB_TT Richard Zhao
2012-05-15 14:27 ` Marek Vasut
2012-05-15 15:19 ` Greg KH
2012-05-16 1:03 ` Marek Vasut
2012-05-15 13:58 ` [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max Richard Zhao
2012-05-16 1:11 ` Marek Vasut
2012-05-16 1:14 ` [PATCH] usb: chipidea: improve the validation of endpoint count Marek Vasut
2012-05-16 11:11 ` Alexander Shishkin
2012-05-16 5:32 ` [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max Peter Chen
2012-05-16 5:46 ` Richard Zhao
2012-05-16 10:48 ` Alexander Shishkin
2012-05-15 13:58 ` [PATCH v1 3/7] usb: chipidea: add imx on-soc utmi phy driver Richard Zhao
2012-05-16 1:20 ` Marek Vasut
2012-05-15 13:58 ` [PATCH v1 4/7] usb: chipidea: add imx driver binding Richard Zhao
2012-05-15 14:03 ` Russell King - ARM Linux
2012-05-15 14:12 ` Richard Zhao
2012-05-16 8:36 ` Richard Zhao
2012-05-16 1:22 ` Marek Vasut
2012-05-16 11:38 ` Alexander Shishkin
2012-05-16 11:58 ` Felipe Balbi
2012-05-16 13:08 ` Richard Zhao
2012-05-16 14:18 ` Alexander Shishkin
2012-05-17 2:41 ` Richard Zhao
2012-05-15 13:58 ` [PATCH v1 5/7] ARM: imx6q: correct device name of usbphy and usboh3 clock export Richard Zhao
2012-05-15 13:58 ` [PATCH v1 6/7] ARM: imx6q: add anatop initialization for usb controllers Richard Zhao
2012-05-15 13:58 ` Richard Zhao [this message]
2012-05-15 14:28 ` [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support Marek Vasut
2012-05-15 15:21 ` Greg KH
2012-05-15 16:30 ` Marek Vasut
2012-05-16 0:37 ` Richard Zhao
2012-05-16 8:34 ` Peter Chen
2012-05-16 13:22 ` Marek Vasut
2012-05-16 15:05 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337090303-16046-8-git-send-email-richard.zhao@freescale.com \
--to=richard.zhao@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.