From: Manukumar <manukumar@signal-networks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] problem while making kernel up
Date: Wed, 30 May 2012 10:32:51 +0530 [thread overview]
Message-ID: <1338354171.2370.13.camel@Manukumar> (raw)
In-Reply-To: <4FBD0D43.1060208@freescale.com>
hello,
I was able to solve nand erase and nand write and saveenv.
Now,I am making kernel up and followed below steps..
1) tf 1000000 uImage_icm_v1.1
nand erase 0x00200000 361483
nand write 1000000 0x00200000 361483
2) tf c00000 p1021rdb_32b.dtb
nand erase 0x00100000 3000
nand write c00000 0x00100000 3000
3) tf 2000000 mini.rootfs.ext2.gz.uboot
nand erase 0x00600000 2115d4
nand write 2000000 0x00600000 2115d4
then to boot kernel from nand i used
bootm 0x00200000 0x00600000 0x00100000
it is giving below log message.
2168276 bytes written: OK
=> bootm 0x00200000 0x00600000 0x00100000
WARNING: adjusting available memory to 30000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
and also my next question is
cp.b 1000000 0x00200000 100000 not working it is showing log as:
=> cp.b 1000000 0x00200000 100000
Copy to Flash... Flash not Erased
why this is happenning please give me the solution for this.
manukumar
signal-networks
On Wed, 2012-05-23 at 11:16 -0500, Scott Wood wrote:
> On 05/23/2012 03:30 AM, Manukumar wrote:
> > Hello,
> > when we get rference board(P1020RDB) we got the u-boot-2010.12 source.
>
> That board is supported by current mainline U-Boot as well -- no patch
> needed.
>
> > by using above source we have modified according to custom boards
> > requirement.
> > can you please provide the link to get updated u-boot source that
> > support P1012 with nand flash samsung(K95608U0D)
> > or please provide me the patch...
>
> git.denx.de, or ftp://ftp.denx.de/pub/u-boot/u-boot-latest.tar.bz2
>
> -Scott
>
next prev parent reply other threads:[~2012-05-30 5:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1337677828.2382.30.camel@Manukumar>
2012-05-22 14:15 ` [U-Boot] Nand flash R/W,saveenv issue Marek Vasut
2012-05-22 17:56 ` Scott Wood
2012-05-23 5:56 ` Manukumar
2012-05-23 8:02 ` Wolfgang Denk
2012-05-23 8:30 ` Manukumar
2012-05-23 16:16 ` Scott Wood
2012-05-30 5:02 ` Manukumar [this message]
2012-05-30 16:18 ` [U-Boot] problem while making kernel up Scott Wood
2012-05-31 4:15 ` Manukumar
2012-05-31 16:21 ` Scott Wood
2012-06-01 3:58 ` Manukumar
2012-06-01 10:10 ` Manukumar
2012-06-01 17:15 ` Scott Wood
2012-06-06 8:13 ` Manukumar
2012-07-05 10:27 ` [U-Boot] USB detection Manukumar
2012-07-05 11:45 ` Albert ARIBAUD
2012-07-05 15:34 ` Marek Vasut
2012-07-09 8:47 ` Manukumar
2012-07-09 12:18 ` Albert ARIBAUD
2012-07-10 2:17 ` Marek Vasut
2012-07-12 6:10 ` Manukumar
2012-10-25 12:21 ` Manukumar
2012-10-25 13:26 ` RgC
2012-09-26 10:42 ` [U-Boot] bootm command in U-boot Manukumar
2012-09-26 14:14 ` Wolfgang Denk
2012-10-03 12:24 ` [U-Boot] Booting through nand flash with other address Manukumar
2012-10-03 15:22 ` Scott Wood
2012-10-04 10:18 ` Manukumar
2012-10-04 17:21 ` Scott Wood
2012-12-04 12:04 ` [U-Boot] access u-boot environment variables from kernel space Manukumar
2012-12-04 13:24 ` Yegor Yefremov
2012-12-04 16:26 ` Scott Wood
2012-12-04 16:35 ` Steve Strobel
2013-01-25 6:50 ` Manukumar
2013-01-25 9:22 ` Wolfgang Denk
2012-11-23 4:08 ` [U-Boot] Quer on JTAG Manukumar
2012-11-23 5:33 ` Wolfgang Denk
2012-09-11 12:47 ` [U-Boot] Nand Flash Programing and Board Bring Up Manukumar
2012-09-11 14:10 ` Marek Vasut
2012-05-23 22:45 ` [U-Boot] Nand flash R/W,saveenv issue Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338354171.2370.13.camel@Manukumar \
--to=manukumar@signal-networks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.