From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 2/5] pciehp: Don't enable presence notification while surprise removal is not supported.
Date: Sat, 23 Jun 2012 00:42:02 -0700 [thread overview]
Message-ID: <1340437325-29282-3-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1340437325-29282-1-git-send-email-yinghai@kernel.org>
If surprise removal is not supported, that event get dropped later.
So there is no point to enable that.
Also some sick chipset have those bit flip around when the card is not present.
and make log full of useless warning.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/pciehp_hpc.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index a960fae..d4fa705 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -808,7 +808,7 @@ int pciehp_get_cur_lnk_width(struct slot *slot,
int pcie_enable_notification(struct controller *ctrl)
{
- u16 cmd, mask;
+ u16 cmd = 0, mask;
/*
* TBD: Power fault detected software notification support.
@@ -820,7 +820,8 @@ int pcie_enable_notification(struct controller *ctrl)
* when it is cleared in the interrupt service routine, and
* next power fault detected interrupt was notified again.
*/
- cmd = PCI_EXP_SLTCTL_PDCE;
+ if (HP_SUPR_RM(ctrl))
+ cmd |= PCI_EXP_SLTCTL_PDCE;
if (ATTN_BUTTN(ctrl))
cmd |= PCI_EXP_SLTCTL_ABPE;
if (MRL_SENS(ctrl))
--
1.7.7
next prev parent reply other threads:[~2012-06-23 7:42 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-23 7:42 [PATCH 0/5] PCI: hotplug related misc patches Yinghai Lu
2012-06-23 7:42 ` [PATCH 1/5] PCI, acpiphp: remove not used res_lock Yinghai Lu
2012-06-23 7:42 ` Yinghai Lu [this message]
2012-06-26 1:26 ` [PATCH 2/5] pciehp: Don't enable presence notification while surprise removal is not supported Kaneshige, Kenji
2012-06-26 18:03 ` Yinghai Lu
2012-07-10 22:56 ` Bjorn Helgaas
2012-07-10 23:12 ` Yinghai Lu
2012-07-10 23:28 ` Bjorn Helgaas
2012-07-10 23:40 ` Yinghai Lu
2012-07-11 16:21 ` Bjorn Helgaas
2012-07-11 17:58 ` Yinghai Lu
2012-07-11 18:15 ` Bjorn Helgaas
2012-07-11 18:49 ` Yinghai Lu
2012-07-11 19:56 ` Bjorn Helgaas
2012-07-11 20:28 ` Yinghai Lu
2012-07-11 20:48 ` Bjorn Helgaas
2012-07-11 20:56 ` Yinghai Lu
2012-07-11 22:24 ` Bjorn Helgaas
2012-07-12 0:05 ` Yinghai Lu
2012-07-12 20:20 ` Bjorn Helgaas
2012-07-13 0:19 ` Yinghai Lu
2012-07-13 15:30 ` Bjorn Helgaas
2012-07-13 18:07 ` Yinghai Lu
2012-06-23 7:42 ` [PATCH 3/5] PCI, acpiphp: Merge acpiphp_debug and debug Yinghai Lu
2012-06-23 7:42 ` [PATCH 4/5] PCI, acpiphp: add is_hotplug_bridge detection Yinghai Lu
2012-07-11 15:50 ` Bjorn Helgaas
2012-07-11 17:14 ` Jason Baron
2012-07-11 19:42 ` Bjorn Helgaas
2012-07-16 16:05 ` Bjorn Helgaas
2012-07-17 14:14 ` Jason Baron
2012-08-15 19:36 ` Bjorn Helgaas
2012-08-20 14:35 ` Jason Baron
2012-08-22 23:19 ` Bjorn Helgaas
2012-09-04 20:55 ` Jason Baron
2012-06-23 7:42 ` [PATCH 5/5] PCI: add root bus children dev's res to fail list Yinghai Lu
2012-07-10 19:30 ` [PATCH 0/5] PCI: hotplug related misc patches Yinghai Lu
2012-07-11 18:32 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340437325-29282-3-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.