From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754507Ab2GBOdk (ORCPT ); Mon, 2 Jul 2012 10:33:40 -0400 Received: from mail-yw0-f51.google.com ([209.85.213.51]:38544 "EHLO mail-yw0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754349Ab2GBOdh (ORCPT ); Mon, 2 Jul 2012 10:33:37 -0400 From: Vinayak Holikatti To: James.Bottomley@hansenpartnership.com Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, patches@linaro.org, linux-samsung-soc@vger.kernel.org, santoshsy@gmail.com, arnd@linaro.org, girish.shivananjappa@linaro.org, saugata.das@linaro.org, vishak.g@samsung.com, venkat@linaro.org, k.rajesh@samsung.com, yejin.moon@samsung.com, dsaxena@linaro.org, ilho215.lee@samsung.com, nala.la@samsung.com, stephen.doel@linaro.org, sreekumar.c@samsung.com, Vinayak Holikatti Subject: [PATCH 3/4] [SCSI] ufs: Add AMBA glue driver to ufshcd Date: Mon, 2 Jul 2012 20:02:51 +0530 Message-Id: <1341239572-7408-4-git-send-email-vinholikatti@gmail.com> X-Mailer: git-send-email 1.7.5.4 In-Reply-To: <1341239572-7408-1-git-send-email-vinholikatti@gmail.com> References: <1341239572-7408-1-git-send-email-vinholikatti@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds AMBA glue driver for ufshcd Signed-off-by: Vinayak Holikatti Signed-off-by: Santosh Yaraganavi --- drivers/scsi/ufs/Kconfig | 10 ++ drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufshcd-amba.c | 180 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 191 insertions(+), 0 deletions(-) create mode 100644 drivers/scsi/ufs/ufshcd-amba.c diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 8c06330..0ad4658 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -78,3 +78,13 @@ config SCSI_UFSHCD_PLATFORM If you have a controller with this interface, say Y or M here. If unsure, say N. + +config SCSI_UFSHCD_AMBA + tristate "AMBA bus based UFS Controller support" + depends on SCSI_UFSHCD && ARM_AMBA + ---help--- + This selects the ARM(R) AMBA(R) PrimeCell UFS Host Controller + Interface support. If you have an ARM(R) platform with + UFS Host Controller, say Y or M here. + + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 1e5bd48..a27330f 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o +obj-$(CONFIG_SCSI_UFSHCD_AMBA) += ufshcd-amba.o diff --git a/drivers/scsi/ufs/ufshcd-amba.c b/drivers/scsi/ufs/ufshcd-amba.c new file mode 100644 index 0000000..d4647e4 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-amba.c @@ -0,0 +1,180 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd-amba.c + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi + * Vinayak Holikatti + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include "ufshcd.h" +#include "ufshcd_common.h" +#include + +/** + * ufshcd_amba_probe - probe routine of the driver + * @dev: pointer to amba device handle + * @id: amba device id + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_amba_probe(struct amba_device *dev, const struct amba_id *id) +{ + void __iomem *mmio_base; + struct ufs_hba *hba; + int err; + + err = amba_request_regions(dev, UFSHCD); + if (err < 0) { + dev_err(&dev->dev, "request regions failed\n"); + goto out_error; + } + + mmio_base = ioremap_nocache(dev->res.start, resource_size(&dev->res)); + if (!mmio_base) { + pr_err("memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + err = ufshcd_init(&dev->dev, &hba, mmio_base, dev->irq[0]); + if (err) { + dev_err(&dev->dev, "%s:%d-%s Initialization failed\n", + __FILE__, __LINE__, __func__); + goto out_iounmap; + } + + amba_set_drvdata(dev, hba); + + return 0; + +out_iounmap: + iounmap(mmio_base); +out_release_regions: + amba_release_regions(dev); +out_error: + return err; +} + +static int ufshcd_amba_remove(struct amba_device *dev) +{ + struct ufs_hba *hba = amba_get_drvdata(dev); + + ufshcd_remove(hba); + free_irq(dev->irq[0], hba); + amba_release_regions(dev); + amba_set_drvdata(dev, NULL); + return 0; +} + +#ifdef CONFIG_PM +/** + * ufshcd_amba_suspend - suspend power management function + * @dev: pointer to amba device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_amba_suspend(struct amba_device *dev, pm_message_t state) +{ + /* + * TODO: + * 1. Block SCSI requests from SCSI midlayer + * 2. Change the internal driver state to non operational + * 3. Set UTRLRSR and UTMRLRSR bits to zero + * 4. Wait until outstanding commands are completed + * 5. Set HCE to zero to send the UFS host controller to reset state + */ + + return -ENOSYS; +} + +/** + * ufshcd_amba_resume - resume power management function + * @dev: pointer to amba device handle + * + * Returns -ENOSYS + */ +static int ufshcd_amba_resume(struct amba_device *dev) +{ + /* + * TODO: + * 1. Set HCE to 1, to start the UFS host controller + * initialization process + * 2. Set UTRLRSR and UTMRLRSR bits to 1 + * 3. Change the internal driver state to operational + * 4. Unblock SCSI requests from SCSI midlayer + */ + + + return -ENOSYS; +} +#endif + +static struct amba_id ufshcd_amba_ids[] = { + { + /* Fake id for Primecell.*/ + .id = 0x00041FF0, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, ufshcd_amba_ids); + +static struct amba_driver ufshcd_amba_driver = { + .drv = { + .name = "ufshcd", + }, + .id_table = ufshcd_amba_ids, + .probe = ufshcd_amba_probe, + .remove = ufshcd_amba_remove, +#ifdef CONFIG_PM + .suspend = ufshcd_amba_suspend, + .resume = ufshcd_amba_resume, +#endif +}; + +module_amba_driver(ufshcd_amba_driver); + +MODULE_AUTHOR("Santosh Yaragnavi "); +MODULE_AUTHOR("Vinayak Holikatti "); +MODULE_DESCRIPTION("AMBA based UFS host controller driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); -- 1.7.5.4