From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Tue, 10 Jul 2012 13:39:35 +0800 Subject: [PATCH v2 6/7] ARM: mxs: convert stmp378x_devb board to device tree In-Reply-To: <1341898587-8462-1-git-send-email-shawn.guo@linaro.org> References: <1341898587-8462-1-git-send-email-shawn.guo@linaro.org> Message-ID: <1341898775-8551-1-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The enc28j60 spi device does not get converted to dts file, because there is no mxs spi driver on mainline so far. The enc28j60 spi in mach-stmp378x_devb.c does not work anyway. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/stmp378x_devb.dts | 78 +++++++++++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c | 1 + 2 files changed, 79 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/stmp378x_devb.dts diff --git a/arch/arm/boot/dts/stmp378x_devb.dts b/arch/arm/boot/dts/stmp378x_devb.dts new file mode 100644 index 0000000..757a327 --- /dev/null +++ b/arch/arm/boot/dts/stmp378x_devb.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale STMP378x Development Board"; + compatible = "fsl,stmp378x-devb", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb at 80000000 { + apbh at 80000000 { + ssp0: ssp at 80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl at 80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios at 0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx at 80040000 { + auart0: serial at 8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + duart: serial at 80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; +}; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index c1e02ae..b3239e2 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -269,6 +269,7 @@ static void __init mxs_machine_init(void) static const char *imx23_dt_compat[] __initdata = { "fsl,imx23-evk", + "fsl,stmp378x_devb" "olimex,imx23-olinuxino", "fsl,imx23", NULL, -- 1.7.5.4