From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jayachandran C" Subject: [PATCH RESEND 0/4] I2C Ocores updates Date: Tue, 10 Jul 2012 11:40:54 +0530 Message-ID: <1341900658-7698-1-git-send-email-jayachandranc@netlogicmicro.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org, richard.rojfors-gfIc91nka+FZroRs9YW3xA@public.gmane.org Cc: Jayachandran C List-Id: linux-i2c@vger.kernel.org [Sending this out again - the changes are straight-forward and I do not see any reason for not merging them. Comments welcome] While trying to add reg-io-width property to i2c-ocores, we noticed a few things that needs to fixed up in i2c-ocores device tree code. The changes are to: * use the standard 'reg-shift' property instead of 'regstep' * fix the fallout of the about change in drivers/mfd/timberdale.c * move bindings documentation to under Documentation/, * fix up formatting, and add \n to a few dev_* messages, * and finally to add reg-io-width optional property. Regards, JC. Ganesan Ramalingam (2): i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: support for 16bit and 32bit IO Jayachandran C (2): i2c: i2c-ocores - DT bindings and minor fixes. V4L/DVB: mfd: use reg_shift instead of regstep .../devicetree/bindings/i2c/i2c-ocores.txt | 33 +++++++ drivers/i2c/busses/i2c-ocores.c | 96 +++++++++----------- drivers/mfd/timberdale.c | 2 +- include/linux/i2c-ocores.h | 7 +- 4 files changed, 83 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ocores.txt -- 1.7.9.5