All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>, Don Dutile <ddutile@redhat.com>
Cc: Jiang Liu <jiang.liu@huawei.com>, Yinghai Lu <yinghai@kernel.org>,
	Taku Izumi <izumi.taku@jp.fujitsu.com>,
	"Rafael J . Wysocki" <rjw@sisk.pl>,
	Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
	Yijing Wang <wangyijing@huawei.com>,
	Keping Chen <chenkeping@huawei.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	Jiang Liu <liuj97@gmail.com>
Subject: [RFC PATCH 14/14] qib/PCI: use PCIe cap access functions to simplify implementation
Date: Tue, 10 Jul 2012 23:54:15 +0800	[thread overview]
Message-ID: <1341935655-5381-15-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1341935655-5381-1-git-send-email-jiang.liu@huawei.com>
In-Reply-To: <CAErSpo70NtEJFaQmDtdTLkSB3fQRNy78juAQO-KbXeceZkunkw@mail.gmail.com>

From: Jiang Liu <jiang.liu@huawei.com>

Use PCIe cap access functions to simplify qib implementation.

Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/infiniband/hw/qib/qib_pcie.c |   34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 790646e..3c30249 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -271,10 +271,9 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
 		    struct qib_msix_entry *entry)
 {
 	u16 linkstat, speed;
-	int pos = 0, pose, ret = 1;
+	int pos = 0, ret = 1;
 
-	pose = pci_pcie_cap(dd->pcidev);
-	if (!pose) {
+	if (!pci_is_pcie(dd->pcidev)) {
 		qib_dev_err(dd, "Can't find PCI Express capability!\n");
 		/* set up something... */
 		dd->lbus_width = 1;
@@ -296,7 +295,7 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
 	if (!pos)
 		qib_enable_intx(dd->pcidev);
 
-	pci_read_config_word(dd->pcidev, pose + PCI_EXP_LNKSTA, &linkstat);
+	pci_pcie_cap_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
 	/*
 	 * speed is bits 0-3, linkwidth is bits 4-8
 	 * no defines for them in headers
@@ -514,7 +513,6 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 {
 	int r;
 	struct pci_dev *parent;
-	int ppos;
 	u16 devid;
 	u32 mask, bits, val;
 
@@ -527,8 +525,7 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 		qib_devinfo(dd->pcidev, "Parent not root\n");
 		return 1;
 	}
-	ppos = pci_pcie_cap(parent);
-	if (!ppos)
+	if (!pci_is_pcie(parent))
 		return 1;
 	if (parent->vendor != 0x8086)
 		return 1;
@@ -585,7 +582,6 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 {
 	int ret = 1; /* Assume the worst */
 	struct pci_dev *parent;
-	int ppos, epos;
 	u16 pcaps, pctl, ecaps, ectl;
 	int rc_sup, ep_sup;
 	int rc_cur, ep_cur;
@@ -596,17 +592,15 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		qib_devinfo(dd->pcidev, "Parent not root\n");
 		goto bail;
 	}
-	ppos = pci_pcie_cap(parent);
-	if (ppos) {
-		pci_read_config_word(parent, ppos + PCI_EXP_DEVCAP, &pcaps);
-		pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
+	if (pci_is_pcie(parent)) {
+		pci_pcie_cap_read_word(parent, PCI_EXP_DEVCAP, &pcaps);
+		pci_pcie_cap_read_word(parent, PCI_EXP_DEVCTL, &pctl);
 	} else
 		goto bail;
 	/* Find out supported and configured values for endpoint (us) */
-	epos = pci_pcie_cap(dd->pcidev);
-	if (epos) {
-		pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCAP, &ecaps);
-		pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, &ectl);
+	if (pci_is_pcie(dd->pcidev)) {
+		pci_pcie_cap_read_word(dd->pcidev, PCI_EXP_DEVCAP, &ecaps);
+		pci_pcie_cap_read_word(dd->pcidev, PCI_EXP_DEVCTL, &ectl);
 	} else
 		goto bail;
 	ret = 0;
@@ -627,14 +621,14 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		rc_cur = rc_sup;
 		pctl = (pctl & ~PCI_EXP_DEVCTL_PAYLOAD) |
 			val2fld(rc_cur, PCI_EXP_DEVCTL_PAYLOAD);
-		pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+		pci_pcie_cap_write_word(parent, PCI_EXP_DEVCTL, pctl);
 	}
 	/* If less than (allowed, supported), bump endpoint payload */
 	if (rc_sup > ep_cur) {
 		ep_cur = rc_sup;
 		ectl = (ectl & ~PCI_EXP_DEVCTL_PAYLOAD) |
 			val2fld(ep_cur, PCI_EXP_DEVCTL_PAYLOAD);
-		pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+		pci_pcie_cap_write_word(dd->pcidev, PCI_EXP_DEVCTL, ectl);
 	}
 
 	/*
@@ -652,13 +646,13 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		rc_cur = rc_sup;
 		pctl = (pctl & ~PCI_EXP_DEVCTL_READRQ) |
 			val2fld(rc_cur, PCI_EXP_DEVCTL_READRQ);
-		pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+		pci_pcie_cap_write_word(parent, PCI_EXP_DEVCTL, pctl);
 	}
 	if (rc_sup > ep_cur) {
 		ep_cur = rc_sup;
 		ectl = (ectl & ~PCI_EXP_DEVCTL_READRQ) |
 			val2fld(ep_cur, PCI_EXP_DEVCTL_READRQ);
-		pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+		pci_pcie_cap_write_word(dd->pcidev, PCI_EXP_DEVCTL, ectl);
 	}
 bail:
 	return ret;
-- 
1.7.9.5


  parent reply	other threads:[~2012-07-10 15:57 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-04  7:44 [Resend with Ack][PATCH v1] PCI: allow acpiphp to handle PCIe ports without native PCIe hotplug capability Jiang Liu
2012-06-04  8:23 ` Kenji Kaneshige
2012-07-03  4:16 ` Bjorn Helgaas
2012-07-03 15:59   ` Bjorn Helgaas
2012-07-03 19:50     ` Don Dutile
2012-07-04 18:07       ` Bjorn Helgaas
2012-07-09 10:05         ` Jiang Liu
2012-07-09 17:05           ` Bjorn Helgaas
2012-07-04  2:52     ` Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 00/14] improve PCIe capabilities registers handling Jiang Liu
2012-07-10 18:44       ` Bjorn Helgaas
2012-07-10 15:54     ` [RFC PATCH 01/14] PCI: add pcie_flags into struct pci_dev to cache PCIe capabilities register Jiang Liu
2012-07-11  9:01       ` Taku Izumi
2012-07-11 14:27         ` Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 02/14] PCI: introduce pci_pcie_type(dev) to replace pci_dev->pcie_type Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 03/14] PCI: remove unused field pcie_type from struct pci_dev Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 04/14] PCI: refine and move pcie_cap_has_*() macros to include/linux/pci.h Jiang Liu
2012-07-10 18:49       ` Bjorn Helgaas
2012-07-10 15:54     ` [RFC PATCH 05/14] PCI: add access functions for PCIe capabilities to hide PCIe spec differences Jiang Liu
2012-07-10 18:35       ` Bjorn Helgaas
2012-07-11  3:07         ` Jiang Liu
2012-07-11  3:40           ` Bjorn Helgaas
2012-07-11  6:40             ` Jiang Liu
2012-07-11 17:52               ` Bjorn Helgaas
2012-07-12  2:56                 ` Jiang Liu
2012-07-12 20:49                   ` Bjorn Helgaas
2012-07-15 16:47                     ` Jiang Liu
2012-07-16 17:29                       ` Bjorn Helgaas
2012-07-16 18:57                         ` Don Dutile
2012-07-17  0:09                         ` Jiang Liu
2012-07-17  0:14                           ` Bjorn Helgaas
2012-07-10 15:54     ` [RFC PATCH 06/14] PCI: use PCIe cap access functions to simplify PCI core implementation Jiang Liu
2012-07-10 18:35       ` Bjorn Helgaas
2012-07-11  2:49         ` Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 07/14] hotplug/PCI: use PCIe cap access functions to simplify implementation Jiang Liu
2012-07-10 18:35       ` Bjorn Helgaas
2012-07-10 15:54     ` [RFC PATCH 08/14] portdrv/PCI: " Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 09/14] pciehp/PCI: " Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 10/14] PME/PCI: " Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 11/14] AER/PCI: " Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 12/14] ASPM/PCI: " Jiang Liu
2012-07-10 15:54     ` [RFC PATCH 13/14] r8169/PCI: " Jiang Liu
2012-07-10 15:54     ` Jiang Liu [this message]
2012-08-15 19:12 ` [Resend with Ack][PATCH v1] PCI: allow acpiphp to handle PCIe ports without native PCIe hotplug capability Bjorn Helgaas
2012-08-16 15:15   ` Jiang Liu
2012-08-22 15:16   ` [PATCH v2] PCI: allow acpiphp to handle PCIe ports w/o " Jiang Liu
2012-09-24 22:10     ` Bjorn Helgaas
2012-09-25 15:16       ` Jiang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341935655-5381-15-git-send-email-jiang.liu@huawei.com \
    --to=liuj97@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=chenkeping@huawei.com \
    --cc=ddutile@redhat.com \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=jiang.liu@huawei.com \
    --cc=kaneshige.kenji@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=wangyijing@huawei.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.