All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott Wood <scottwood@freescale.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, Alexander Graf <agraf@suse.de>
Subject: [PATCH v2 3/3] powerpc/mpc85xx_ds: convert to unified PCI init
Date: Tue, 10 Jul 2012 19:26:49 -0500	[thread overview]
Message-ID: <1341966409-22660-4-git-send-email-scottwood@freescale.com> (raw)
In-Reply-To: <1341966409-22660-1-git-send-email-scottwood@freescale.com>

Similar to how the primary PCI bridge is identified by looking
for an isa subnode, we determine whether to apply uli exclusions
by looking for a uli subnode.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2: Rebased on Kumar's next

 arch/powerpc/platforms/85xx/mpc85xx_ds.c |   97 +++++++++---------------------
 1 files changed, 29 insertions(+), 68 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index d30f6c4..6d3265f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -114,71 +114,53 @@ void __init mpc85xx_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-static int primary_phb_addr;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
+static struct device_node *pci_with_uli;
+
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	struct device_node* node;
-	struct resource rsrc;
-
-	node = hose->dn;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == primary_phb_addr) {
+	if (hose->dn == pci_with_uli)
 		return uli_exclude_device(hose, bus, devfn);
-	}
 
 	return PCIBIOS_SUCCESSFUL;
 }
 #endif	/* CONFIG_PCI */
 
-/*
- * Setup the architecture
- */
-static void __init mpc85xx_ds_setup_arch(void)
+static void __init mpc85xx_ds_pci_init(void)
 {
 #ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
+	struct device_node *node;
 
-	if (ppc_md.progress)
-		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
+	fsl_pci_init();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
-		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+	/* See if we have a ULI under the primary */
+
+	node = of_find_node_by_name(NULL, "uli1575");
+	while ((pci_with_uli = of_get_parent(node))) {
+		of_node_put(node);
+		node = pci_with_uli;
+
+		if (pci_with_uli == fsl_pci_primary) {
+			ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+			break;
 		}
 	}
-
-	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+}
 
-	mpc85xx_smp_init();
+/*
+ * Setup the architecture
+ */
+static void __init mpc85xx_ds_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	mpc85xx_ds_pci_init();
+	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
 }
@@ -190,14 +172,7 @@ static int __init mpc8544_ds_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "MPC8544DS");
 }
 
 machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
@@ -215,14 +190,7 @@ static int __init mpc8572_ds_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x8000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
 }
 
 /*
@@ -232,14 +200,7 @@ static int __init p2020_ds_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
 }
 
 define_machine(mpc8544_ds) {
-- 
1.7.5.4

  parent reply	other threads:[~2012-07-11  0:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-11  0:26 [PATCH v2 0/3] powerpc/fsl: PCI refactoring and QEMU paravirt platform Scott Wood
2012-07-11  0:26 ` [PATCH v2 1/3] powerpc/fsl-pci: get PCI init out of board files Scott Wood
2012-07-11 12:58   ` Kumar Gala
2012-07-11  0:26 ` [PATCH v2 2/3] powerpc/e500: add paravirt QEMU platform Scott Wood
2012-07-11 12:57   ` Kumar Gala
2012-07-11  0:26 ` Scott Wood [this message]
2012-07-11 12:57   ` [PATCH v2 3/3] powerpc/mpc85xx_ds: convert to unified PCI init Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341966409-22660-4-git-send-email-scottwood@freescale.com \
    --to=scottwood@freescale.com \
    --cc=agraf@suse.de \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.