All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joerg Roedel <joerg.roedel@amd.com>
To: <iommu@lists.linux-foundation.org>
Cc: <linux-kernel@vger.kernel.org>, Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 05/27] iommu/amd: Split out PCI related parts of IOMMU initialization
Date: Wed, 11 Jul 2012 15:38:50 +0200	[thread overview]
Message-ID: <1342013952-10174-6-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1342013952-10174-1-git-send-email-joerg.roedel@amd.com>

For interrupt remapping the relevant IOMMU initialization
needs to run earlier at boot when the PCI subsystem is not
yet initialized. To support that this patch splits the parts
of IOMMU initialization which need PCI accesses out of the
initial setup path so that this can be done later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/iommu/amd_iommu_init.c  |  224 +++++++++++++++++++++------------------
 drivers/iommu/amd_iommu_types.h |    5 +-
 2 files changed, 121 insertions(+), 108 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index de11b98..fa6ca8b 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -715,90 +715,6 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 }
 
 /*
- * This function reads some important data from the IOMMU PCI space and
- * initializes the driver data structure with it. It reads the hardware
- * capabilities and the first/last device entries
- */
-static void __init init_iommu_from_pci(struct amd_iommu *iommu)
-{
-	int cap_ptr = iommu->cap_ptr;
-	u32 range, misc, low, high;
-	int i, j;
-
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
-			      &iommu->cap);
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
-			      &range);
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
-			      &misc);
-
-	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
-					 MMIO_GET_FD(range));
-	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
-					MMIO_GET_LD(range));
-	iommu->evt_msi_num = MMIO_MSI_NUM(misc);
-
-	if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
-		amd_iommu_iotlb_sup = false;
-
-	/* read extended feature bits */
-	low  = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
-	high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
-
-	iommu->features = ((u64)high << 32) | low;
-
-	if (iommu_feature(iommu, FEATURE_GT)) {
-		int glxval;
-		u32 pasids;
-		u64 shift;
-
-		shift   = iommu->features & FEATURE_PASID_MASK;
-		shift >>= FEATURE_PASID_SHIFT;
-		pasids  = (1 << shift);
-
-		amd_iommu_max_pasids = min(amd_iommu_max_pasids, pasids);
-
-		glxval   = iommu->features & FEATURE_GLXVAL_MASK;
-		glxval >>= FEATURE_GLXVAL_SHIFT;
-
-		if (amd_iommu_max_glx_val == -1)
-			amd_iommu_max_glx_val = glxval;
-		else
-			amd_iommu_max_glx_val = min(amd_iommu_max_glx_val, glxval);
-	}
-
-	if (iommu_feature(iommu, FEATURE_GT) &&
-	    iommu_feature(iommu, FEATURE_PPR)) {
-		iommu->is_iommu_v2   = true;
-		amd_iommu_v2_present = true;
-	}
-
-	if (!is_rd890_iommu(iommu->dev))
-		return;
-
-	/*
-	 * Some rd890 systems may not be fully reconfigured by the BIOS, so
-	 * it's necessary for us to store this information so it can be
-	 * reprogrammed on resume
-	 */
-
-	pci_read_config_dword(iommu->dev, iommu->cap_ptr + 4,
-			      &iommu->stored_addr_lo);
-	pci_read_config_dword(iommu->dev, iommu->cap_ptr + 8,
-			      &iommu->stored_addr_hi);
-
-	/* Low bit locks writes to configuration space */
-	iommu->stored_addr_lo &= ~1;
-
-	for (i = 0; i < 6; i++)
-		for (j = 0; j < 0x12; j++)
-			iommu->stored_l1[i][j] = iommu_read_l1(iommu, i, j);
-
-	for (i = 0; i < 0x83; i++)
-		iommu->stored_l2[i] = iommu_read_l2(iommu, i);
-}
-
-/*
  * Takes a pointer to an AMD IOMMU entry in the ACPI table and
  * initializes the hardware and our data structures with it.
  */
@@ -1014,13 +930,7 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	/*
 	 * Copy data from ACPI table entry to the iommu struct
 	 */
-	iommu->dev = pci_get_bus_and_slot(PCI_BUS(h->devid), h->devid & 0xff);
-	if (!iommu->dev)
-		return 1;
-
-	iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
-						PCI_DEVFN(0, 0));
-
+	iommu->devid   = h->devid;
 	iommu->cap_ptr = h->cap_ptr;
 	iommu->pci_seg = h->pci_seg;
 	iommu->mmio_phys = h->mmio_phys;
@@ -1038,20 +948,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 
 	iommu->int_enabled = false;
 
-	init_iommu_from_pci(iommu);
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
-	if (iommu_feature(iommu, FEATURE_PPR)) {
-		iommu->ppr_log = alloc_ppr_log(iommu);
-		if (!iommu->ppr_log)
-			return -ENOMEM;
-	}
-
-	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
-		amd_iommu_np_cache = true;
-
-	return pci_enable_device(iommu->dev);
+	return 0;
 }
 
 /*
@@ -1100,6 +1000,121 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	return 0;
 }
 
+static int iommu_init_pci(struct amd_iommu *iommu)
+{
+	int cap_ptr = iommu->cap_ptr;
+	u32 range, misc, low, high;
+
+	iommu->dev = pci_get_bus_and_slot(PCI_BUS(iommu->devid),
+					  iommu->devid & 0xff);
+	if (!iommu->dev)
+		return -ENODEV;
+
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
+			      &iommu->cap);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
+			      &range);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
+			      &misc);
+
+	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+					 MMIO_GET_FD(range));
+	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+					MMIO_GET_LD(range));
+
+	if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
+		amd_iommu_iotlb_sup = false;
+
+	/* read extended feature bits */
+	low  = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
+	high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
+
+	iommu->features = ((u64)high << 32) | low;
+
+	if (iommu_feature(iommu, FEATURE_GT)) {
+		int glxval;
+		u32 pasids;
+		u64 shift;
+
+		shift   = iommu->features & FEATURE_PASID_MASK;
+		shift >>= FEATURE_PASID_SHIFT;
+		pasids  = (1 << shift);
+
+		amd_iommu_max_pasids = min(amd_iommu_max_pasids, pasids);
+
+		glxval   = iommu->features & FEATURE_GLXVAL_MASK;
+		glxval >>= FEATURE_GLXVAL_SHIFT;
+
+		if (amd_iommu_max_glx_val == -1)
+			amd_iommu_max_glx_val = glxval;
+		else
+			amd_iommu_max_glx_val = min(amd_iommu_max_glx_val, glxval);
+	}
+
+	if (iommu_feature(iommu, FEATURE_GT) &&
+	    iommu_feature(iommu, FEATURE_PPR)) {
+		iommu->is_iommu_v2   = true;
+		amd_iommu_v2_present = true;
+	}
+
+	if (iommu_feature(iommu, FEATURE_PPR)) {
+		iommu->ppr_log = alloc_ppr_log(iommu);
+		if (!iommu->ppr_log)
+			return -ENOMEM;
+	}
+
+	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
+		amd_iommu_np_cache = true;
+
+	if (is_rd890_iommu(iommu->dev)) {
+		int i, j;
+
+		iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
+				PCI_DEVFN(0, 0));
+
+		/*
+		 * Some rd890 systems may not be fully reconfigured by the
+		 * BIOS, so it's necessary for us to store this information so
+		 * it can be reprogrammed on resume
+		 */
+		pci_read_config_dword(iommu->dev, iommu->cap_ptr + 4,
+				&iommu->stored_addr_lo);
+		pci_read_config_dword(iommu->dev, iommu->cap_ptr + 8,
+				&iommu->stored_addr_hi);
+
+		/* Low bit locks writes to configuration space */
+		iommu->stored_addr_lo &= ~1;
+
+		for (i = 0; i < 6; i++)
+			for (j = 0; j < 0x12; j++)
+				iommu->stored_l1[i][j] = iommu_read_l1(iommu, i, j);
+
+		for (i = 0; i < 0x83; i++)
+			iommu->stored_l2[i] = iommu_read_l2(iommu, i);
+	}
+
+	return pci_enable_device(iommu->dev);
+}
+
+static int amd_iommu_init_pci(void)
+{
+	struct amd_iommu *iommu;
+	int ret = 0;
+
+	for_each_iommu(iommu) {
+		ret = iommu_init_pci(iommu);
+		if (ret)
+			break;
+	}
+
+	/* Make sure ACS will be enabled */
+	pci_request_acs();
+
+	ret = amd_iommu_init_devices();
+
+	return ret;
+}
+
 /****************************************************************************
  *
  * The following functions initialize the MSI interrupts for all IOMMUs
@@ -1563,7 +1578,7 @@ int __init amd_iommu_init_hardware(void)
 	if (ret)
 		goto free;
 
-	ret = amd_iommu_init_devices();
+	ret = amd_iommu_init_pci();
 	if (ret)
 		goto free;
 
@@ -1696,9 +1711,6 @@ int __init amd_iommu_detect(void)
 	iommu_detected = 1;
 	x86_init.iommu.iommu_init = amd_iommu_init;
 
-	/* Make sure ACS will be enabled */
-	pci_request_acs();
-
 	return 0;
 }
 
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 594faaf..6ad8b99 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -501,6 +501,9 @@ struct amd_iommu {
 	/* IOMMUv2 */
 	bool is_iommu_v2;
 
+	/* PCI device id of the IOMMU device */
+	u16 devid;
+
 	/*
 	 * Capability pointer. There could be more than one IOMMU per PCI
 	 * device function if there are more than one AMD IOMMU capability
@@ -530,8 +533,6 @@ struct amd_iommu {
 	u32 evt_buf_size;
 	/* event buffer virtual address */
 	u8 *evt_buf;
-	/* MSI number for event interrupt */
-	u16 evt_msi_num;
 
 	/* Base of the PPR log, if present */
 	u8 *ppr_log;
-- 
1.7.9.5



WARNING: multiple messages have this Message-ID
From: Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 05/27] iommu/amd: Split out PCI related parts of IOMMU initialization
Date: Wed, 11 Jul 2012 15:38:50 +0200	[thread overview]
Message-ID: <1342013952-10174-6-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1342013952-10174-1-git-send-email-joerg.roedel-5C7GfCeVMHo@public.gmane.org>

For interrupt remapping the relevant IOMMU initialization
needs to run earlier at boot when the PCI subsystem is not
yet initialized. To support that this patch splits the parts
of IOMMU initialization which need PCI accesses out of the
initial setup path so that this can be done later.

Signed-off-by: Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
---
 drivers/iommu/amd_iommu_init.c  |  224 +++++++++++++++++++++------------------
 drivers/iommu/amd_iommu_types.h |    5 +-
 2 files changed, 121 insertions(+), 108 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index de11b98..fa6ca8b 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -715,90 +715,6 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 }
 
 /*
- * This function reads some important data from the IOMMU PCI space and
- * initializes the driver data structure with it. It reads the hardware
- * capabilities and the first/last device entries
- */
-static void __init init_iommu_from_pci(struct amd_iommu *iommu)
-{
-	int cap_ptr = iommu->cap_ptr;
-	u32 range, misc, low, high;
-	int i, j;
-
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
-			      &iommu->cap);
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
-			      &range);
-	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
-			      &misc);
-
-	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
-					 MMIO_GET_FD(range));
-	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
-					MMIO_GET_LD(range));
-	iommu->evt_msi_num = MMIO_MSI_NUM(misc);
-
-	if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
-		amd_iommu_iotlb_sup = false;
-
-	/* read extended feature bits */
-	low  = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
-	high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
-
-	iommu->features = ((u64)high << 32) | low;
-
-	if (iommu_feature(iommu, FEATURE_GT)) {
-		int glxval;
-		u32 pasids;
-		u64 shift;
-
-		shift   = iommu->features & FEATURE_PASID_MASK;
-		shift >>= FEATURE_PASID_SHIFT;
-		pasids  = (1 << shift);
-
-		amd_iommu_max_pasids = min(amd_iommu_max_pasids, pasids);
-
-		glxval   = iommu->features & FEATURE_GLXVAL_MASK;
-		glxval >>= FEATURE_GLXVAL_SHIFT;
-
-		if (amd_iommu_max_glx_val == -1)
-			amd_iommu_max_glx_val = glxval;
-		else
-			amd_iommu_max_glx_val = min(amd_iommu_max_glx_val, glxval);
-	}
-
-	if (iommu_feature(iommu, FEATURE_GT) &&
-	    iommu_feature(iommu, FEATURE_PPR)) {
-		iommu->is_iommu_v2   = true;
-		amd_iommu_v2_present = true;
-	}
-
-	if (!is_rd890_iommu(iommu->dev))
-		return;
-
-	/*
-	 * Some rd890 systems may not be fully reconfigured by the BIOS, so
-	 * it's necessary for us to store this information so it can be
-	 * reprogrammed on resume
-	 */
-
-	pci_read_config_dword(iommu->dev, iommu->cap_ptr + 4,
-			      &iommu->stored_addr_lo);
-	pci_read_config_dword(iommu->dev, iommu->cap_ptr + 8,
-			      &iommu->stored_addr_hi);
-
-	/* Low bit locks writes to configuration space */
-	iommu->stored_addr_lo &= ~1;
-
-	for (i = 0; i < 6; i++)
-		for (j = 0; j < 0x12; j++)
-			iommu->stored_l1[i][j] = iommu_read_l1(iommu, i, j);
-
-	for (i = 0; i < 0x83; i++)
-		iommu->stored_l2[i] = iommu_read_l2(iommu, i);
-}
-
-/*
  * Takes a pointer to an AMD IOMMU entry in the ACPI table and
  * initializes the hardware and our data structures with it.
  */
@@ -1014,13 +930,7 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	/*
 	 * Copy data from ACPI table entry to the iommu struct
 	 */
-	iommu->dev = pci_get_bus_and_slot(PCI_BUS(h->devid), h->devid & 0xff);
-	if (!iommu->dev)
-		return 1;
-
-	iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
-						PCI_DEVFN(0, 0));
-
+	iommu->devid   = h->devid;
 	iommu->cap_ptr = h->cap_ptr;
 	iommu->pci_seg = h->pci_seg;
 	iommu->mmio_phys = h->mmio_phys;
@@ -1038,20 +948,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 
 	iommu->int_enabled = false;
 
-	init_iommu_from_pci(iommu);
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
-	if (iommu_feature(iommu, FEATURE_PPR)) {
-		iommu->ppr_log = alloc_ppr_log(iommu);
-		if (!iommu->ppr_log)
-			return -ENOMEM;
-	}
-
-	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
-		amd_iommu_np_cache = true;
-
-	return pci_enable_device(iommu->dev);
+	return 0;
 }
 
 /*
@@ -1100,6 +1000,121 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	return 0;
 }
 
+static int iommu_init_pci(struct amd_iommu *iommu)
+{
+	int cap_ptr = iommu->cap_ptr;
+	u32 range, misc, low, high;
+
+	iommu->dev = pci_get_bus_and_slot(PCI_BUS(iommu->devid),
+					  iommu->devid & 0xff);
+	if (!iommu->dev)
+		return -ENODEV;
+
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
+			      &iommu->cap);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
+			      &range);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
+			      &misc);
+
+	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+					 MMIO_GET_FD(range));
+	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+					MMIO_GET_LD(range));
+
+	if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
+		amd_iommu_iotlb_sup = false;
+
+	/* read extended feature bits */
+	low  = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
+	high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
+
+	iommu->features = ((u64)high << 32) | low;
+
+	if (iommu_feature(iommu, FEATURE_GT)) {
+		int glxval;
+		u32 pasids;
+		u64 shift;
+
+		shift   = iommu->features & FEATURE_PASID_MASK;
+		shift >>= FEATURE_PASID_SHIFT;
+		pasids  = (1 << shift);
+
+		amd_iommu_max_pasids = min(amd_iommu_max_pasids, pasids);
+
+		glxval   = iommu->features & FEATURE_GLXVAL_MASK;
+		glxval >>= FEATURE_GLXVAL_SHIFT;
+
+		if (amd_iommu_max_glx_val == -1)
+			amd_iommu_max_glx_val = glxval;
+		else
+			amd_iommu_max_glx_val = min(amd_iommu_max_glx_val, glxval);
+	}
+
+	if (iommu_feature(iommu, FEATURE_GT) &&
+	    iommu_feature(iommu, FEATURE_PPR)) {
+		iommu->is_iommu_v2   = true;
+		amd_iommu_v2_present = true;
+	}
+
+	if (iommu_feature(iommu, FEATURE_PPR)) {
+		iommu->ppr_log = alloc_ppr_log(iommu);
+		if (!iommu->ppr_log)
+			return -ENOMEM;
+	}
+
+	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
+		amd_iommu_np_cache = true;
+
+	if (is_rd890_iommu(iommu->dev)) {
+		int i, j;
+
+		iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
+				PCI_DEVFN(0, 0));
+
+		/*
+		 * Some rd890 systems may not be fully reconfigured by the
+		 * BIOS, so it's necessary for us to store this information so
+		 * it can be reprogrammed on resume
+		 */
+		pci_read_config_dword(iommu->dev, iommu->cap_ptr + 4,
+				&iommu->stored_addr_lo);
+		pci_read_config_dword(iommu->dev, iommu->cap_ptr + 8,
+				&iommu->stored_addr_hi);
+
+		/* Low bit locks writes to configuration space */
+		iommu->stored_addr_lo &= ~1;
+
+		for (i = 0; i < 6; i++)
+			for (j = 0; j < 0x12; j++)
+				iommu->stored_l1[i][j] = iommu_read_l1(iommu, i, j);
+
+		for (i = 0; i < 0x83; i++)
+			iommu->stored_l2[i] = iommu_read_l2(iommu, i);
+	}
+
+	return pci_enable_device(iommu->dev);
+}
+
+static int amd_iommu_init_pci(void)
+{
+	struct amd_iommu *iommu;
+	int ret = 0;
+
+	for_each_iommu(iommu) {
+		ret = iommu_init_pci(iommu);
+		if (ret)
+			break;
+	}
+
+	/* Make sure ACS will be enabled */
+	pci_request_acs();
+
+	ret = amd_iommu_init_devices();
+
+	return ret;
+}
+
 /****************************************************************************
  *
  * The following functions initialize the MSI interrupts for all IOMMUs
@@ -1563,7 +1578,7 @@ int __init amd_iommu_init_hardware(void)
 	if (ret)
 		goto free;
 
-	ret = amd_iommu_init_devices();
+	ret = amd_iommu_init_pci();
 	if (ret)
 		goto free;
 
@@ -1696,9 +1711,6 @@ int __init amd_iommu_detect(void)
 	iommu_detected = 1;
 	x86_init.iommu.iommu_init = amd_iommu_init;
 
-	/* Make sure ACS will be enabled */
-	pci_request_acs();
-
 	return 0;
 }
 
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 594faaf..6ad8b99 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -501,6 +501,9 @@ struct amd_iommu {
 	/* IOMMUv2 */
 	bool is_iommu_v2;
 
+	/* PCI device id of the IOMMU device */
+	u16 devid;
+
 	/*
 	 * Capability pointer. There could be more than one IOMMU per PCI
 	 * device function if there are more than one AMD IOMMU capability
@@ -530,8 +533,6 @@ struct amd_iommu {
 	u32 evt_buf_size;
 	/* event buffer virtual address */
 	u8 *evt_buf;
-	/* MSI number for event interrupt */
-	u16 evt_msi_num;
 
 	/* Base of the PPR log, if present */
 	u8 *ppr_log;
-- 
1.7.9.5

  parent reply	other threads:[~2012-07-11 13:42 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-11 13:38 [PATCH 0/27] AMD IOMMU interrupt remapping support v2 Joerg Roedel
2012-07-11 13:38 ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 01/27] x86/irq: Add data structure to keep AMD specific irq remapping information Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 21:42   ` Yinghai Lu
2012-07-11 21:42     ` Yinghai Lu
2012-07-12 15:40     ` Joerg Roedel
2012-07-12 15:40       ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 02/27] x86/irq: Introduce irq_cfg->remapped Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 03/27] iommu/amd: Fix sparse warnings Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-17 10:44   ` Joerg Roedel
2012-07-17 10:44     ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 04/27] iommu/amd: Use acpi_get_table instead of acpi_table_parse Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` Joerg Roedel [this message]
2012-07-11 13:38   ` [PATCH 05/27] iommu/amd: Split out PCI related parts of IOMMU initialization Joerg Roedel
2012-07-11 13:38 ` [PATCH 06/27] iommu/amd: Move informational prinks out of iommu_enable Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 07/27] iommu/amd: Introduce early_amd_iommu_init routine Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 08/27] iommu/amd: Split enable_iommus() routine Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 09/27] iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops() Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 10/27] iommu/amd: Introduce amd_iommu_init_dma routine Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 11/27] iommu/amd: Convert iommu initialization to state machine Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 12/27] iommu/amd: Keep track of HPET and IOAPIC device ids Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 13/27] iommu/amd: Add slab-cache for irq remapping tables Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:38 ` [PATCH 14/27] iommu/amd: Allocate data structures to keep track of " Joerg Roedel
2012-07-11 13:38   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 15/27] iommu/amd: Check if IOAPIC information is correct Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 16/27] iommu/amd: Split device table initialization into irq and dma part Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 17/27] iommu/amd: Make sure IOMMU is not considered to translate itself Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 18/27] iommu/amd: Add IRTE invalidation routine Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 19/27] iommu/amd: Add routines to manage irq remapping tables Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 20/27] iommu/amd: Add IOAPIC remapping routines Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 21/27] iommu/amd: Implement MSI routines for interrupt remapping Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 22/27] iommu/amd: Add call-back routine for HPET MSI Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 23/27] iommu/amd: Add initialization routines for AMD interrupt remapping Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 24/27] iommu/amd: Make sure irq remapping still works on dma init failure Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 25/27] iommu/irq: Use amd_iommu_irq_ops if supported Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 26/27] iommu/amd: Print message to system log when irq remapping is enabled Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel
2012-07-11 13:39 ` [PATCH 27/27] iommu/amd: Report irq remapping through IOMMU-API Joerg Roedel
2012-07-11 13:39   ` Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342013952-10174-6-git-send-email-joerg.roedel@amd.com \
    --to=joerg.roedel@amd.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH 05/27] iommu/amd: Split out PCI related parts of IOMMU initialization' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.