From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, mcgrof@qca.qualcomm.com
Subject: [PATCH 11/12] ath9k_hw: apply XLNA bias settings from EEPROM
Date: Wed, 11 Jul 2012 19:59:14 +0200 [thread overview]
Message-ID: <1342029555-31618-11-git-send-email-nbd@openwrt.org> (raw)
In-Reply-To: <1342029555-31618-10-git-send-email-nbd@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 53 +++++++++++++++++++----
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 5 ++
3 files changed, 50 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 4d90265..c5f3c43 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -131,8 +131,9 @@ static const struct ar9300_eeprom ar9300_default = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext1 = {
@@ -331,8 +332,9 @@ static const struct ar9300_eeprom ar9300_default = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0c80c080),
.papdRateMaskHt40 = LE32(0x0080c080),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext2 = {
@@ -704,8 +706,9 @@ static const struct ar9300_eeprom ar9300_x113 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0c80c080),
.papdRateMaskHt40 = LE32(0x0080c080),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext1 = {
@@ -904,8 +907,9 @@ static const struct ar9300_eeprom ar9300_x113 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext2 = {
@@ -1278,8 +1282,9 @@ static const struct ar9300_eeprom ar9300_h112 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0c80c080),
.papdRateMaskHt40 = LE32(0x0080c080),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext1 = {
@@ -1478,8 +1483,9 @@ static const struct ar9300_eeprom ar9300_h112 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext2 = {
@@ -1852,8 +1858,9 @@ static const struct ar9300_eeprom ar9300_x112 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0c80c080),
.papdRateMaskHt40 = LE32(0x0080c080),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext1 = {
@@ -2052,8 +2059,9 @@ static const struct ar9300_eeprom ar9300_x112 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext2 = {
@@ -2425,8 +2433,9 @@ static const struct ar9300_eeprom ar9300_h116 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0c80C080),
.papdRateMaskHt40 = LE32(0x0080C080),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext1 = {
@@ -2625,8 +2634,9 @@ static const struct ar9300_eeprom ar9300_h116 = {
.thresh62 = 28,
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+ .xlna_bias_strength = 0,
.futureModal = {
- 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
},
},
.base_ext2 = {
@@ -3942,6 +3952,28 @@ static void ar9003_hw_xpa_timing_control_apply(struct ath_hw *ah, bool is2ghz)
AR_PHY_XPA_TIMING_CTL_FRAME_XPAA_ON, xpa_ctl);
}
+static void ar9003_hw_xlna_bias_strength_apply(struct ath_hw *ah, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ u8 bias;
+
+ if (!(eep->baseEepHeader.featureEnable & 0x40))
+ return;
+
+ if (!AR_SREV_9300(ah))
+ return;
+
+ bias = ar9003_modal_header(ah, is2ghz)->xlna_bias_strength;
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS,
+ bias & 0x3);
+ bias >>= 2;
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS,
+ bias & 0x3);
+ bias >>= 2;
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS,
+ bias & 0x3);
+}
+
static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
struct ath9k_channel *chan)
{
@@ -3950,6 +3982,7 @@ static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
ar9003_hw_xpa_bias_level_apply(ah, is2ghz);
ar9003_hw_ant_ctrl_apply(ah, is2ghz);
ar9003_hw_drive_strength_apply(ah);
+ ar9003_hw_xlna_bias_strength_apply(ah, is2ghz);
ar9003_hw_atten_apply(ah, chan);
ar9003_hw_quick_drop_apply(ah, chan->channel);
if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah) && !AR_SREV_9550(ah))
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 8396d15..3a1ff55 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -231,7 +231,8 @@ struct ar9300_modal_eep_header {
__le32 papdRateMaskHt20;
__le32 papdRateMaskHt40;
__le16 switchcomspdt;
- u8 futureModal[8];
+ u8 xlna_bias_strength;
+ u8 futureModal[7];
} __packed;
struct ar9300_cal_data_per_freq_op_loop {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 751c83b..7bfbaf0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -633,6 +633,8 @@
#define AR_PHY_65NM_CH0_BIAS2 0x160c4
#define AR_PHY_65NM_CH0_BIAS4 0x160cc
#define AR_PHY_65NM_CH0_RXTX4 0x1610c
+#define AR_PHY_65NM_CH1_RXTX4 0x1650c
+#define AR_PHY_65NM_CH2_RXTX4 0x1690c
#define AR_CH0_TOP (AR_SREV_9300(ah) ? 0x16288 : \
((AR_SREV_9462(ah) ? 0x1628c : 0x16280)))
@@ -876,6 +878,9 @@
#define AR_PHY_65NM_CH0_RXTX4_THERM_ON 0x10000000
#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_S 28
+#define AR_PHY_65NM_RXTX4_XLNA_BIAS 0xC0000000
+#define AR_PHY_65NM_RXTX4_XLNA_BIAS_S 30
+
/*
* Channel 1 Register Map
*/
--
1.7.3.2
next prev parent reply other threads:[~2012-07-11 17:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-11 17:59 [PATCH 01/12] ath9k_hw: fall back to OTP ROM when platform data has no valid eeprom data Felix Fietkau
2012-07-11 17:59 ` [PATCH 02/12] ath9k: validate rx antenna settings Felix Fietkau
2012-07-11 17:59 ` [PATCH 03/12] ath9k_hw: enable ANI on AR934x Felix Fietkau
2012-07-11 17:59 ` [PATCH 04/12] ath9k_hw: fix tx gain tables for AR934x Felix Fietkau
2012-07-11 17:59 ` [PATCH 05/12] ath9k_hw: remove redundant arguments to INIT_INI_ARRAY Felix Fietkau
2012-07-11 17:59 ` [PATCH 06/12] ath9k/ath9k_htc: fix txop limit handling Felix Fietkau
2012-07-11 17:59 ` [PATCH 07/12] ath9k: make per-WMM-AC queue sizes configurable via debugfs Felix Fietkau
2012-07-11 17:59 ` [PATCH 08/12] ath9k: fix aggregate size limit based on queue TXOP limit Felix Fietkau
2012-07-11 17:59 ` [PATCH 09/12] ath9k_hw: apply XPA timing control values from EEPROM Felix Fietkau
2012-07-11 17:59 ` [PATCH 10/12] ath9k_hw: clean up AR9003 EEPROM code Felix Fietkau
2012-07-11 17:59 ` Felix Fietkau [this message]
2012-07-11 17:59 ` [PATCH 12/12] ath9k_hw: fix SREV checks for applying tuning caps from EEPROM Felix Fietkau
2012-07-12 6:27 ` [PATCH 08/12] ath9k: fix aggregate size limit based on queue TXOP limit Sujith Manoharan
2012-07-12 11:06 ` Felix Fietkau
2012-07-11 18:42 ` [PATCH 02/12] ath9k: validate rx antenna settings Gabor Juhos
2012-07-11 18:54 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342029555-31618-11-git-send-email-nbd@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.