From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Fri, 13 Jul 2012 18:27:24 +0200 (CEST) Received: from mms3.broadcom.com ([216.31.210.19]:2342 "EHLO mms3.broadcom.com" rhost-flags-OK-OK-OK-OK) by eddie.linux-mips.org with ESMTP id S1903726Ab2GMQYk (ORCPT ); Fri, 13 Jul 2012 18:24:40 +0200 Received: from [10.9.200.133] by mms3.broadcom.com with ESMTP (Broadcom SMTP Relay (Email Firewall v6.5)); Fri, 13 Jul 2012 09:23:09 -0700 X-Server-Uuid: B86B6450-0931-4310-942E-F00ED04CA7AF Received: from mail-irva-13.broadcom.com (10.11.16.103) by IRVEXCHHUB02.corp.ad.broadcom.com (10.9.200.133) with Microsoft SMTP Server id 8.2.247.2; Fri, 13 Jul 2012 09:23:45 -0700 Received: from hqcas02.netlogicmicro.com (unknown [10.65.50.15]) by mail-irva-13.broadcom.com (Postfix) with ESMTP id C39849F9F6; Fri, 13 Jul 2012 09:24:24 -0700 (PDT) Received: from jayachandranc.netlogicmicro.com (10.7.0.77) by hqcas02.netlogicmicro.com (10.65.50.15) with Microsoft SMTP Server id 14.1.339.1; Fri, 13 Jul 2012 09:24:24 -0700 From: "Jayachandran C" To: linux-mips@linux-mips.org, ralf@linux-mips.org cc: "Ganesan Ramalingam" , "Jayachandran C" Subject: [PATCH 07/12] MIPS: Netlogic: DTS file for XLP boards Date: Fri, 13 Jul 2012 21:53:20 +0530 Message-ID: <1342196605-4260-8-git-send-email-jayachandranc@netlogicmicro.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1342196605-4260-1-git-send-email-jayachandranc@netlogicmicro.com> References: <1342196605-4260-1-git-send-email-jayachandranc@netlogicmicro.com> MIME-Version: 1.0 X-Originating-IP: [10.7.0.77] X-WSS-ID: 7C1E94E74989490133-01-01 Content-Type: text/plain Content-Transfer-Encoding: 7bit X-archive-position: 33916 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: jayachandranc@netlogicmicro.com Precedence: bulk List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-Id: linux-mips X-List-ID: linux-mips List-subscribe: List-owner: List-post: List-archive: X-list: linux-mips Return-Path: From: Ganesan Ramalingam Add a basic DTS file netlogic/dts/nlm_xlp.dts which contains memory, i2c devices, NOR flash and command line arguments. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C --- arch/mips/netlogic/dts/xlp_evp.dts | 103 ++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 arch/mips/netlogic/dts/xlp_evp.dts diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts new file mode 100644 index 0000000..86a29ca --- /dev/null +++ b/arch/mips/netlogic/dts/xlp_evp.dts @@ -0,0 +1,103 @@ +/* + * XLP8XX Device Tree Source for EVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-EVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + memory { + device_type = "memory"; + reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M + 0 0x20000000 0 0xa0000000 // 2560M at 512M + 0 0xe0000000 1 0x00000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x01000000>; // GBU chipselects + i2c0: ocores@32000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x32100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@33000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x33100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; -- 1.7.9.5