From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([92.198.50.35]:45273 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751871Ab2GRMMG (ORCPT ); Wed, 18 Jul 2012 08:12:06 -0400 Subject: Re: [PATCH v3] media: coda: Add driver for Coda video codec. From: Philipp Zabel To: javier Martin Cc: linux-media@vger.kernel.org, sakari.ailus@maxwell.research.nokia.com, kyungmin.park@samsung.com, s.nawrocki@samsung.com, laurent.pinchart@ideasonboard.com, mchehab@infradead.org, s.hauer@pengutronix.de In-Reply-To: References: <1342077100-8629-1-git-send-email-javier.martin@vista-silicon.com> <1342459273.2535.665.camel@pizza.hi.pengutronix.de> <1342600546.2542.101.camel@pizza.hi.pengutronix.de> <1342603378.2542.149.camel@pizza.hi.pengutronix.de> Content-Type: text/plain; charset="UTF-8" Date: Wed, 18 Jul 2012 14:12:02 +0200 Message-ID: <1342613522.2542.154.camel@pizza.hi.pengutronix.de> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Am Mittwoch, den 18.07.2012, 11:26 +0200 schrieb javier Martin: > On 18 July 2012 11:22, Philipp Zabel wrote: > > Hi Javier, > > > > Am Mittwoch, den 18.07.2012, 11:01 +0200 schrieb javier Martin: > >> On 18 July 2012 10:35, Philipp Zabel wrote: > >> > Hi Javier, > >> > > >> > Am Mittwoch, den 18.07.2012, 09:12 +0200 schrieb javier Martin: > >> > [...] > >> >> > I see there is a comment about the expected register setting not working > >> >> > for CODA_REG_BIT_STREAM_CTRL in start_streaming(). Could this be > >> >> > related? > >> >> > >> >> I don't think so. This means that the following line: > >> >> > >> >> coda_write(dev, (3 << 3), CODA_REG_BIT_STREAM_CTRL); > >> >> > >> >> should be: > >> >> > >> >> coda_write(dev, (CODADX6_STREAM_BUF_PIC_RESET | > >> >> CODADX6_STREAM_BUF_PIC_FLUSH), CODA_REG_BIT_STREAM_CTRL); > >> >> > >> >> But the latter does not work. > >> > > >> > Looks to me like (3 << 3) == (CODA7_STREAM_BUF_PIC_RESET | > >> > CODA7_STREAM_BUF_PIC_FLUSH) could be the explanation. > >> > >> You mean "!=", don't you? > > > > I mean "==". coda.h contains: > > > > #define CODA7_STREAM_BUF_PIC_RESET (1 << 4) > > #define CODA7_STREAM_BUF_PIC_FLUSH (1 << 3) > > > > So maybe those are the correct bits for i.MX27 with the 2.2.5 firmware. > > If that is the case, you could do s/CODA7_STREAM_BUF_/CODA_STREAM_BUF_/ > > and drop the incorrect CODADX6_STREAM_BUF_ defines. > > Sorry, I didn't catch the 'CODA7' prefix in your defines. > OK then, I'll do s/CODA7_STREAM_BUF_/CODA_STREAM_BUF_/ and remove the > comment too. Hold on, I just read that there should be a ENC_DYN_BUFALLOC_EN bit ((1 << 5) on i.MX53, (1 << 4) on i.MX27) - so maybe the #defines are right after all, just that bit needs to be set for the dynamic buffer handling to work. regards Philipp