From mboxrd@z Thu Jan 1 00:00:00 1970 From: AnilKumar Ch Subject: [PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone Date: Tue, 24 Jul 2012 21:15:19 +0530 Message-ID: <1343144719-26352-3-git-send-email-anilkumar@ti.com> References: <1343144719-26352-1-git-send-email-anilkumar@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1343144719-26352-1-git-send-email-anilkumar@ti.com> Sender: linux-omap-owner@vger.kernel.org To: linux-omap@vger.kernel.org Cc: tony@atomide.com, b-cousson@ti.com, linux-arm-kernel@lists.infradead.org, devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca, AnilKumar Ch List-Id: devicetree@vger.kernel.org Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. Signed-off-by: AnilKumar Ch --- arch/arm/boot/dts/am335x-bone.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 8fdf43a..b0c98cd 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -46,3 +46,18 @@ regulator-boot-on; regulator-always-on; }; + +&am3358_pinmux { + + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5C 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; +}; -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: anilkumar@ti.com (AnilKumar Ch) Date: Tue, 24 Jul 2012 21:15:19 +0530 Subject: [PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone In-Reply-To: <1343144719-26352-1-git-send-email-anilkumar@ti.com> References: <1343144719-26352-1-git-send-email-anilkumar@ti.com> Message-ID: <1343144719-26352-3-git-send-email-anilkumar@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. Signed-off-by: AnilKumar Ch --- arch/arm/boot/dts/am335x-bone.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 8fdf43a..b0c98cd 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -46,3 +46,18 @@ regulator-boot-on; regulator-always-on; }; + +&am3358_pinmux { + + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5C 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; +}; -- 1.7.9.5