From mboxrd@z Thu Jan 1 00:00:00 1970 From: Archit Taneja Date: Thu, 30 Aug 2012 11:52:23 +0000 Subject: [PATCH v2 01/23] OMAPDSS: outputs: Create a new entity called outputs Message-Id: <1346326845-16583-2-git-send-email-archit@ti.com> List-Id: References: <1345528711-27801-1-git-send-email-archit@ti.com> <1346326845-16583-1-git-send-email-archit@ti.com> In-Reply-To: <1346326845-16583-1-git-send-email-archit@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: tomi.valkeinen@ti.com Cc: rob@ti.com, linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, Archit Taneja The current OMAPDSS design contains 3 software entities: Overlays, Managers and Devices. These map to pipelines, overlay managers and the panels respectively in hardware. One or more overlays connect to a manager to represent a composition, the manager connects to a device(generally a display) to display the content. The part of DSS hardware which isn't represented by any of the above entities are interfaces/outputs that connect to an overlay manager, i.e blocks like DSI, HDMI, VENC and so on. Currently, an overlay manager directly connects to the display, and the output to which it is actually connected is ignored. The panel driver of the display is responsible of calling output specific functions to configure the output. Adding outputs as a new software entity gives us the following benefits: - Have exact information on the possible connections between managers and outputs: A manager can't connect to each and every output, there only limited hardware links between a manager's video port and some of the outputs. - Remove hacks related to connecting managers and devices: Currently, default links between managers and devices are set in a not so clean way. Matching is done via comparing the device type, and the display types supported by the manager. This isn't sufficient to establish all the possible links between managers, outputs and devices in hardware. - Make panel drivers more generic: The DSS panel drivers currently call interface/output specific functions to configure the hardware IP. When making these calls, the driver isn't actually aware of the underlying output. The output driver extracts information from the panel's omap_dss_device pointer to figure out which interface it is connected to, and then configures the corresponding output block. An example of this is when a DSI panel calls dsi functions, the dsi driver figures out whether the panel is connected to DSI1 or DSI2. This isn't correct, and having output as entities will give the panel driver the exact information on which output to configure. Having outputs also gives the opportunity to make panel drivers generic across different platforms/SoCs, this is achieved as omap specific output calls can be replaced by ops of a particular output type. - Have more complex connections between managers, outputs and devices: OMAPDSS currently doesn't support use cases like 2 outputs connect to a single device. This can be achieved by extending properties of outputs to connect to more managers or devices. - Represent writeback as an output: The writeback pipeline fits well in OMAPDSS as compared to overlays, managers or devices. Add a new struct to represent outputs. An output struct holds pointers to the manager and device structs to which it is connected. Add functions which can register an output, or look for one. Create an enum which represent each output instance. Signed-off-by: Archit Taneja --- drivers/video/omap2/dss/Makefile | 2 +- drivers/video/omap2/dss/dss.h | 3 +++ drivers/video/omap2/dss/output.c | 43 ++++++++++++++++++++++++++++++++++++++ include/video/omapdss.h | 30 ++++++++++++++++++++++++++ 4 files changed, 77 insertions(+), 1 deletion(-) create mode 100644 drivers/video/omap2/dss/output.c diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile index 30a48fb..645f8c3 100644 --- a/drivers/video/omap2/dss/Makefile +++ b/drivers/video/omap2/dss/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_OMAP2_DSS) += omapdss.o omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \ - manager.o overlay.o apply.o + manager.o overlay.o output.o apply.o omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index d6cca82..e77d8d2 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -222,6 +222,9 @@ int dss_ovl_set_manager(struct omap_overlay *ovl, struct omap_overlay_manager *mgr); int dss_ovl_unset_manager(struct omap_overlay *ovl); +/* output */ +void dss_register_output(struct omap_dss_output *out); + /* display */ int dss_suspend_all_devices(void); int dss_resume_all_devices(void); diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/omap2/dss/output.c new file mode 100644 index 0000000..7d81be5 --- /dev/null +++ b/drivers/video/omap2/dss/output.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2012 Texas Instruments Ltd + * Author: Archit Taneja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include + +#include