All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Abraham <thomas.abraham@linaro.org>
To: linux-mmc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org
Cc: will.newton@imgtec.com, cjb@laptop.org,
	grant.likely@secretlab.ca, rob.herring@calxeda.com,
	linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
	girish.shivananjappa@linaro.org, jh80.chung@samsung.com,
	tgih.jun@samsung.com, patches@linaro.org
Subject: [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms
Date: Wed, 05 Sep 2012 01:19:33 +0530	[thread overview]
Message-ID: <1346788173-23845-1-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1346238072-7324-4-git-send-email-thomas.abraham@linaro.org>

Add device nodes for the four instances of dw_mmc controllers in Exynos5250
and enable instance 0 and 2 for the smdk5250 board.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts |   57 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi         |   32 ++++++++++++++++
 2 files changed, 89 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8a5e348..ae1cffe 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -16,6 +16,13 @@
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
+	aliases {
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
@@ -72,6 +79,56 @@
 		status = "disabled";
 	};
 
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
+				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
+				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 004aaa8..f69e389 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -182,6 +182,38 @@
 		#size-cells = <0>;
 	};
 
+	dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc3@12230000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
1.6.6.rc2

  reply	other threads:[~2012-09-04 19:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-29 11:01 [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller Thomas Abraham
2012-08-29 11:01 ` Thomas Abraham
2012-08-29 11:01 ` [PATCH v4 1/3] ARM: Samsung: Add support for MSHC controller clocks Thomas Abraham
2012-08-29 11:01   ` Thomas Abraham
2012-08-29 11:01 ` [PATCH v4 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers Thomas Abraham
2012-08-29 11:01   ` Thomas Abraham
2012-08-29 11:01 ` [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms Thomas Abraham
2012-08-29 11:01   ` Thomas Abraham
2012-09-04 19:49   ` Thomas Abraham [this message]
2012-09-05 10:43     ` Seungwon Jeon
2012-09-07  9:43       ` Thomas Abraham
2012-09-07  9:43         ` Thomas Abraham
2012-09-26  1:47 ` [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller Kukjin Kim
2012-09-26  1:47   ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346788173-23845-1-git-send-email-thomas.abraham@linaro.org \
    --to=thomas.abraham@linaro.org \
    --cc=cjb@laptop.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=girish.shivananjappa@linaro.org \
    --cc=grant.likely@secretlab.ca \
    --cc=jh80.chung@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=patches@linaro.org \
    --cc=rob.herring@calxeda.com \
    --cc=tgih.jun@samsung.com \
    --cc=will.newton@imgtec.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.