From: Troy Kisky <troy.kisky@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 21/32] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory
Date: Wed, 3 Oct 2012 18:47:23 -0700 [thread overview]
Message-ID: <1349315254-21151-22-git-send-email-troy.kisky@boundarydevices.com> (raw)
In-Reply-To: <1349315254-21151-1-git-send-email-troy.kisky@boundarydevices.com>
Sabrelite does not have memory associated with CS1
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 5 -----
1 file changed, 5 deletions(-)
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 9c622c8..2d03ff7 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -155,20 +155,15 @@ WRITE_ENTRY1(MMDC_P0_MDCTL, 0x831A0000)
/* MDSCR, con_req, LOAD MR2, CS0, A3,A10 set (CAS Write=6), RZQ/2 */
WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04088032)
-WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0408803A)
/* LOAD MR3, CS0 */
WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00008033)
-WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0000803B)
/* LOAD MR1, CS0, A1,A6 set Rtt=RZQ/2, ODI=RZQ/7 */
WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428031)
-WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428039)
/* LOAD MR0, CS0, A6,A8,A11 set CAS=8, WR=8, DLL reset */
WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408030)
-WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408038)
/* ZQ calibrate, CS0 */
WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008040)
-WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008048)
WRITE_ENTRY1(MMDC_P0_MPZQHWCTRL, 0xA1380003)
WRITE_ENTRY1(MMDC_P1_MPZQHWCTRL, 0xA1380003)
--
1.7.9.5
next prev parent reply other threads:[~2012-10-04 1:47 UTC|newest]
Thread overview: 202+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 0:02 [U-Boot] (no subject) Troy Kisky
2012-09-19 0:02 ` [U-Boot] [PATCH 01/11] imximage: make header variable length Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 02/11] imximage: check dcd_len as entries added Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 03/11] imximage: enable word writes for version2 header Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 04/11] imximage: cleanup parsing Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 05/11] imximage: add expression evaluation Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 06/11] imximage: add plugin commands Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 07/11] imximage.cfg: run files through C preprocessor Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 08/11] mx6: add plugin file for use with imximage.cfg Troy Kisky
2012-09-19 1:40 ` Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 09/11] mx6qsabrelite: imximage.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 10/11] mx6qsabrelite: imximage.cfg: allow plugin to work Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode Troy Kisky
2012-09-19 1:52 ` Troy Kisky
2012-09-22 2:38 ` [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support Troy Kisky
2012-09-22 2:38 ` [U-Boot] [PATCH V2 01/21] imximage: make header variable length Troy Kisky
2012-09-23 10:57 ` Stefano Babic
2012-09-24 20:30 ` Troy Kisky
2012-09-25 11:08 ` Stefano Babic
2012-09-22 2:38 ` [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added Troy Kisky
2012-09-23 11:05 ` Stefano Babic
2012-09-24 20:54 ` Troy Kisky
2012-09-25 11:12 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 03/21] imximage: enable word writes for version2 header Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 04/21] imximage: cleanup parsing Troy Kisky
2012-09-23 11:08 ` Stefano Babic
2012-09-24 20:59 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 05/21] imximage: add expression evaluation Troy Kisky
2012-09-23 14:56 ` Stefano Babic
2012-09-24 21:18 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 06/21] imximage: add plugin commands Troy Kisky
2012-09-23 15:38 ` Stefano Babic
2012-09-24 21:46 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 07/21] imximage.cfg: run files through C preprocessor Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg Troy Kisky
2012-09-22 4:06 ` Vikram Narayanan
2012-09-23 10:17 ` Stefano Babic
2012-09-23 16:23 ` Eric Nelson
2012-09-23 17:08 ` Stefano Babic
2012-09-23 23:29 ` Eric Nelson
2012-09-24 7:22 ` Stefano Babic
2012-09-24 13:48 ` Eric Nelson
2012-09-24 15:17 ` Stefano Babic
2012-09-24 22:23 ` Troy Kisky
2012-09-25 12:13 ` Stefano Babic
2012-09-24 20:46 ` Troy Kisky
2012-09-25 11:57 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 09/21] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 10/21] mx6q_4x_mt41j128.cfg: allow plugin to work Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 11/21] mx6q_4x_mt41j128.cfg: enable plugin mode Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 12/21] mx6q_4x_mt41j128.cfg: add comments Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 13/21] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 14/21] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 15/21] mx6q_4x_mt41j128.cfg: reorder for more efficient storage Troy Kisky
2012-09-22 17:27 ` Fabio Estevam
2012-09-22 17:34 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 16/21] mx6q_4x_mt41j128.cfg: force ZQ calibration Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type Troy Kisky
2012-09-22 2:50 ` Fabio Estevam
2012-09-22 17:07 ` Troy Kisky
2012-09-23 14:59 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 18/21] arch-mx6: add mx6dl_pins.h Troy Kisky
2012-09-22 4:10 ` Vikram Narayanan
2012-09-22 17:17 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 19/21] mx6qsabrelite: add support for mx6 solo/duallite Troy Kisky
2012-09-22 4:12 ` Vikram Narayanan
2012-09-22 17:24 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 20/21] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 21/21] mx6qsabrelite: change CONFIG_SYS_PROMPT Troy Kisky
2012-09-22 6:21 ` [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support Dirk Behme
2012-09-22 16:53 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 00/32] " Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 01/32] imximage: check dcd_len as entries added Troy Kisky
2012-10-20 15:45 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 02/32] imximage: remove redundant setting of app_dest_ptr Troy Kisky
2012-10-08 13:17 ` Stefano Babic
2012-10-20 15:46 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location Troy Kisky
2012-10-08 13:19 ` Stefano Babic
2012-10-18 18:40 ` Troy Kisky
2012-10-19 8:01 ` Stefano Babic
2012-10-20 15:46 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 04/32] imximage: fix size of image to load Troy Kisky
2012-10-20 15:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 05/32] imximage: delay setting of image size Troy Kisky
2012-10-20 15:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 06/32] imximage: change parameters to set_imx_hdr Troy Kisky
2012-10-20 15:48 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 07/32] imximage: make set_imx_hdr_v1/v2 easier to read Troy Kisky
2012-10-20 15:48 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 08/32] imximage: make header variable length Troy Kisky
2012-10-20 15:52 ` Stefano Babic
2012-10-21 1:31 ` Troy Kisky
2012-10-21 8:35 ` Stefano Babic
2012-10-22 21:03 ` Troy Kisky
2012-11-28 1:31 ` [U-Boot] [PATCH V4 00/11] imximage series Troy Kisky
2012-11-28 1:31 ` [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512 Troy Kisky
2012-11-28 9:27 ` Wolfgang Denk
2012-11-28 18:18 ` Troy Kisky
2012-11-28 20:25 ` Wolfgang Denk
2012-11-28 21:05 ` Troy Kisky
2012-11-28 21:35 ` Wolfgang Denk
2012-11-29 2:42 ` Troy Kisky
2012-11-29 5:28 ` Wolfgang Denk
2012-12-03 9:23 ` Stefano Babic
2012-12-03 9:12 ` Stefano Babic
2012-11-28 18:26 ` Troy Kisky
2012-11-28 10:34 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 02/11] imximage: make header variable length Troy Kisky
2012-11-28 10:42 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 03/11] imximage: remove static imximage_version Troy Kisky
2012-11-28 10:43 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src Troy Kisky
2012-11-28 9:38 ` Wolfgang Denk
2012-11-28 18:36 ` Troy Kisky
2012-11-28 20:30 ` Wolfgang Denk
2012-11-28 1:31 ` [U-Boot] [PATCH V4 05/11] imximage: change parameters for set_dcd_val/set_imx_hdr Troy Kisky
2012-11-28 10:43 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 06/11] imximage: move set_imx_hdr to struct data_src Troy Kisky
2012-11-28 10:45 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 07/11] imximage: move set_dcd_val " Troy Kisky
2012-11-28 10:47 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header Troy Kisky
2012-11-28 9:39 ` Wolfgang Denk
2012-11-28 20:40 ` Troy Kisky
2012-12-04 8:23 ` Stefano Babic
2012-11-28 10:47 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 09/11] tools: add parse_helper file Troy Kisky
2012-11-28 9:41 ` Wolfgang Denk
2012-11-28 10:48 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 10/11] imximage: use parse_helper functions Troy Kisky
2012-11-28 10:48 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 11/11] parse_helper: add expression evaluation Troy Kisky
2012-11-28 10:49 ` Liu Hui-R64343
2012-11-28 9:30 ` [U-Boot] [PATCH V4 00/11] imximage series Wolfgang Denk
2012-11-28 18:29 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 09/32] imximage: remove static imximage_version Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 10/32] imximage: prepare to move static variables to struct data_src Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 11/32] imximage: change parameters for set_dcd_val/set_imx_hdr Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 12/32] imximage: move set_imx_hdr to struct data_src Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 13/32] imximage: move set_dcd_val " Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 14/32] imximage: enable word writes for version2 header Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 15/32] tools: add parse_helper file Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 16/32] imximage: use parse_helper functions Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor Troy Kisky
2012-10-07 18:19 ` Eric Nelson
2012-10-08 19:11 ` Troy Kisky
2012-10-08 13:38 ` Stefano Babic
2012-10-08 21:48 ` Troy Kisky
2012-10-10 2:03 ` Troy Kisky
2012-10-11 11:11 ` Stefano Babic
2012-10-11 20:33 ` Troy Kisky
2012-10-11 22:27 ` stefano babic
2012-10-11 23:15 ` Tom Rini
2012-10-13 10:11 ` [U-Boot] File placement in Soc / board dirs and make issues (was: [PATCH V3 17/32] imximage.cfg: run files through C preprocessor) Albert ARIBAUD
2012-10-13 15:17 ` Tom Rini
2012-10-14 8:37 ` [U-Boot] File placement in Soc / board dirs and make issues Albert ARIBAUD
2012-10-15 1:24 ` Tom Rini
2012-10-23 6:30 ` Albert ARIBAUD
2012-10-17 20:32 ` [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor Troy Kisky
2012-10-17 21:05 ` Tom Rini
2012-10-17 21:38 ` Troy Kisky
2012-10-17 22:29 ` Tom Rini
2012-10-04 1:47 ` [U-Boot] [PATCH V3 18/32] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 19/32] mx6q_4x_mt41j128.cfg: add comments Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 20/32] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset Troy Kisky
2012-10-04 1:47 ` Troy Kisky [this message]
2012-10-07 21:01 ` [U-Boot] [PATCH V3 21/32] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory Eric Nelson
2012-10-04 1:47 ` [U-Boot] [PATCH V3 22/32] mx6q_4x_mt41j128.cfg: force ZQ calibration Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 23/32] mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q Troy Kisky
2012-10-08 13:41 ` Stefano Babic
2012-10-08 21:49 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 25/32] imx-common: cpu: add imx_ddr_size Troy Kisky
2012-10-08 13:06 ` Stefano Babic
2012-10-08 21:35 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 26/32] arch-mx6: add mx6dl_pins.h Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite Troy Kisky
2012-10-04 3:23 ` Otavio Salvador
2012-10-04 23:34 ` Troy Kisky
2012-10-08 13:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 28/32] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support Troy Kisky
2012-10-08 18:46 ` Eric Nelson
2012-10-08 21:08 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 29/32] Add boards for sabrelite variants mx6s(solo) and mx6dl(duallite) Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT Troy Kisky
2012-10-04 3:00 ` Otavio Salvador
2012-10-04 23:28 ` Troy Kisky
2012-10-08 13:54 ` Stefano Babic
2012-10-08 21:58 ` Troy Kisky
2012-10-08 22:05 ` Fabio Estevam
2012-10-08 22:18 ` stefano babic
2012-10-08 22:22 ` Eric Nelson
2012-10-08 22:21 ` Eric Nelson
2012-10-04 1:47 ` [U-Boot] [PATCH V3 31/32] parse_helper: add expression evaluation Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 32/32] imx-mkimage.h: use base + offset syntax Troy Kisky
2012-10-04 10:18 ` [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support Albert ARIBAUD
2012-10-04 14:36 ` Eric Nelson
2012-10-04 19:51 ` Albert ARIBAUD
2012-10-04 14:52 ` Eric Nelson
2012-10-08 13:15 ` Stefano Babic
2012-10-08 23:58 ` Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349315254-21151-22-git-send-email-troy.kisky@boundarydevices.com \
--to=troy.kisky@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.