[Qemu-devel] [PATCH 12/14] xilinx_zynq: Added SPI controllers + flashes

[Peter Crosthwaite <peter.crosthwaite@petalogix.com>]

From: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>

Added the two SPI controllers to the zynq machine model. Attached two SPI flash
devices to each controller.

Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
---
 hw/xilinx_zynq.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/hw/xilinx_zynq.c b/hw/xilinx_zynq.c
index 7e6c273..fd46ba2 100644
--- a/hw/xilinx_zynq.c
+++ b/hw/xilinx_zynq.c
@@ -24,6 +24,9 @@
 #include "flash.h"
 #include "blockdev.h"
 #include "loader.h"
+#include "ssi.h"
+
+#define NUM_SPI_FLASHES 4
 
 #define FLASH_SIZE (64 * 1024 * 1024)
 #define FLASH_SECTOR_SIZE (128 * 1024)
@@ -46,6 +49,34 @@ static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
     sysbus_connect_irq(s, 0, irq);
 }
 
+static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq)
+{
+    DeviceState *dev;
+    SysBusDevice *busdev;
+    SSIBus *spi;
+    int i;
+
+    dev = qdev_create(NULL, "xilinx,spips");
+    qdev_init_nofail(dev);
+    busdev = sysbus_from_qdev(dev);
+    sysbus_mmio_map(busdev, 0, base_addr);
+    sysbus_connect_irq(busdev, 0, irq);
+
+    spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
+
+    for (i = 0; i < NUM_SPI_FLASHES; ++i) {
+        qemu_irq cs_line;
+
+        dev = ssi_create_slave_no_init(spi, "m25p80");
+        qdev_prop_set_string(dev, "partname", "n25q128");
+        qdev_init_nofail(dev);
+
+        cs_line = qdev_get_gpio_in(dev, 0);
+        sysbus_connect_irq(busdev, i+1, cs_line);
+    }
+
+}
+
 static void zynq_init(ram_addr_t ram_size, const char *boot_device,
                         const char *kernel_filename, const char *kernel_cmdline,
                         const char *initrd_filename, const char *cpu_model)
@@ -113,6 +144,9 @@ static void zynq_init(ram_addr_t ram_size, const char *boot_device,
         pic[n] = qdev_get_gpio_in(dev, n);
     }
 
+    zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET]);
+    zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET]);
+
     sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
     sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
 
-- 
1.7.0.4