All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v5 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB
Date: Wed, 16 Nov 2022 14:23:37 +0530	[thread overview]
Message-ID: <134c28a0-2d49-549c-dc8d-0887d8fd29c3@ti.com> (raw)
In-Reply-To: <20221103044125.172864-2-mranostay@ti.com>



On 03/11/22 10:11 am, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
> 
> Add support for single instance of USB 3.0 controller in J721S2 SoC.
> 
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index d1ec26110376..93b71d079b4f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -26,6 +26,20 @@ l3cache-sram@200000 {
>  		};
>  	};
>  
> +	scm_conf: syscon@104000 {
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> +		reg = <0x00 0x00104000 0x00 0x18000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x00 0x00 0x00104000 0x18000>;
> +
> +		usb_serdes_mux: mux-controller-0 {
> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
> +		};
> +	};
> +
>  	gic500: interrupt-controller@1800000 {
>  		compatible = "arm,gic-v3";
>  		#address-cells = <2>;
> @@ -726,6 +740,34 @@ cpts@310d0000 {
>  		};
>  	};
>  
> +	usbss0: cdns-usb@4104000 {
> +		compatible = "ti,j721e-usb";
> +		reg = <0x00 0x04104000 0x00 0x100>;
> +		clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
> +		clock-names = "ref", "lpm";
> +		assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
> +		assigned-clock-parents = <&k3_clks 360 17>;
> +		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		dma-coherent;
> +
> +		usb0: usb@6000000 {
> +			compatible = "cdns,usb3";
> +			reg = <0x00 0x06000000 0x00 0x10000>,
> +			      <0x00 0x06010000 0x00 0x10000>,
> +			      <0x00 0x06020000 0x00 0x10000>;
> +			reg-names = "otg", "xhci", "dev";
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "host", "peripheral", "otg";
> +			maximum-speed = "super-speed";
> +			dr_mode = "otg";
> +		};
> +	};
> +
>  	main_mcan0: can@2701000 {
>  		compatible = "bosch,m_can";
>  		reg = <0x00 0x02701000 0x00 0x200>,

Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> 

-- 
Regards,
Ravi

WARNING: multiple messages have this Message-ID (diff)
From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v5 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB
Date: Wed, 16 Nov 2022 14:23:37 +0530	[thread overview]
Message-ID: <134c28a0-2d49-549c-dc8d-0887d8fd29c3@ti.com> (raw)
In-Reply-To: <20221103044125.172864-2-mranostay@ti.com>



On 03/11/22 10:11 am, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
> 
> Add support for single instance of USB 3.0 controller in J721S2 SoC.
> 
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index d1ec26110376..93b71d079b4f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -26,6 +26,20 @@ l3cache-sram@200000 {
>  		};
>  	};
>  
> +	scm_conf: syscon@104000 {
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> +		reg = <0x00 0x00104000 0x00 0x18000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x00 0x00 0x00104000 0x18000>;
> +
> +		usb_serdes_mux: mux-controller-0 {
> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
> +		};
> +	};
> +
>  	gic500: interrupt-controller@1800000 {
>  		compatible = "arm,gic-v3";
>  		#address-cells = <2>;
> @@ -726,6 +740,34 @@ cpts@310d0000 {
>  		};
>  	};
>  
> +	usbss0: cdns-usb@4104000 {
> +		compatible = "ti,j721e-usb";
> +		reg = <0x00 0x04104000 0x00 0x100>;
> +		clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
> +		clock-names = "ref", "lpm";
> +		assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
> +		assigned-clock-parents = <&k3_clks 360 17>;
> +		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		dma-coherent;
> +
> +		usb0: usb@6000000 {
> +			compatible = "cdns,usb3";
> +			reg = <0x00 0x06000000 0x00 0x10000>,
> +			      <0x00 0x06010000 0x00 0x10000>,
> +			      <0x00 0x06020000 0x00 0x10000>;
> +			reg-names = "otg", "xhci", "dev";
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "host", "peripheral", "otg";
> +			maximum-speed = "super-speed";
> +			dr_mode = "otg";
> +		};
> +	};
> +
>  	main_mcan0: can@2701000 {
>  		compatible = "bosch,m_can";
>  		reg = <0x00 0x02701000 0x00 0x200>,

Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> 

-- 
Regards,
Ravi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-16  8:53 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-03  4:41 [PATCH v5 0/8] J721S2: Add support for additional IPs Matt Ranostay
2022-11-03  4:41 ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:53   ` Ravi Gunasekaran [this message]
2022-11-16  8:53     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:58   ` Ravi Gunasekaran
2022-11-16  8:58     ` Ravi Gunasekaran
2022-11-18  9:58     ` Matt Ranostay
2022-11-18  9:58       ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:33   ` Vaishnav Achath
2022-11-16  8:33     ` Vaishnav Achath
2022-11-18 10:01     ` Matt Ranostay
2022-11-18 10:01       ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:54   ` Ravi Gunasekaran
2022-11-16  8:54     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:55   ` Ravi Gunasekaran
2022-11-16  8:55     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:36   ` Vaishnav Achath
2022-11-16  8:36     ` Vaishnav Achath
2022-11-03  4:41 ` [PATCH v5 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16 10:25   ` Siddharth Vadapalli
2022-11-16 10:25     ` Siddharth Vadapalli
2022-11-03  4:41 ` [PATCH v5 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16 10:26   ` Siddharth Vadapalli
2022-11-16 10:26     ` Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=134c28a0-2d49-549c-dc8d-0887d8fd29c3@ti.com \
    --to=r-gunasekaran@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mranostay@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.