[U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework

[Allen Martin <amartin@nvidia.com>]

Change tegra SPL to use common SPL framework.  Any tegra specific
initialization is now done in spl_board_init() instead of
board_init_f()/board_init_r().  Only one SPL boot target is supported
on tegra, which is boot to RAM image.  jump_to_image_no_args() must be
overridden on tegra so the host CPU can be initialized.

Signed-off-by: Allen Martin <amartin@nvidia.com>
---
v2: Add back some required headers to avoid compiler warnings
---
 arch/arm/cpu/arm720t/tegra-common/spl.c |   91 +++++--------------------------
 arch/arm/include/asm/arch-tegra20/spl.h |   28 ++++++++++
 include/configs/tegra20-common.h        |    4 ++
 3 files changed, 46 insertions(+), 77 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-tegra20/spl.h

diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 0d37ce8..c280ab7 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -23,105 +23,42 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
 #include "cpu.h"
+#include <spl.h>
 
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
 
-DECLARE_GLOBAL_DATA_PTR;
 
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
+void spl_board_init(void)
 {
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
+	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+	/* enable JTAG */
+	writel(0xC0, &pmt->pmt_cfg_ctl);
 
-void board_init_f(ulong dummy)
-{
 	board_init_uart_f();
 
 	/* Initialize periph GPIOs */
 	gpio_early_init_uart();
 
-	/*
-	 * We call relocate_code() with relocation target same as the
-	 * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
-	 * skipped. Instead, only .bss initialization will happen. That's
-	 * all we need
-	 */
-	debug(">>board_init_f()\n");
-	relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+	clock_early_init();
+	preloader_console_init();
 }
 
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
+u32 spl_boot_device(void)
 {
-	const char *u_boot_rev = U_BOOT_VERSION;
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-
-	serial_init();		/* serial communications setup */
-
-	gd->have_console = 1;
-
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
+	return BOOT_DEVICE_RAM;
 }
 
-void board_init_r(gd_t *id, ulong dummy)
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
-	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
-	/* enable JTAG */
-	writel(0xC0, &pmt->pmt_cfg_ctl);
-
-	debug(">>spl:board_init_r()\n");
-
-	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
-			CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-	spl_board_init();
-#endif
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
 
-	clock_early_init();
-	serial_init();
-	preloader_console_init();
-
-	start_cpu((u32)CONFIG_SYS_TEXT_BASE);
+	start_cpu((u32)spl_image->entry_point);
 	halt_avp();
-	/* not reached */
-}
-
-int board_usb_init(const void *blob)
-{
-	return 0;
 }
diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h
new file mode 100644
index 0000000..5e453c5
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/spl.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM         1
+
+#endif
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 2274ee9..d7d6dc3 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -169,6 +169,7 @@
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
 
 #define CONFIG_SYS_TEXT_BASE	0x0010c000
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE
@@ -184,6 +185,9 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x00108000
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SYS_TEXT_BASE - \
-- 
1.7.10.4