All of lore.kernel.org
 help / color / mirror / Atom feed
From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: PXA: Add z2-usb-switch driver
Date: Sun, 28 Oct 2012 18:35:51 +0300	[thread overview]
Message-ID: <1351438555-4668-1-git-send-email-anarsoul@gmail.com> (raw)

This driver controls mode of USB port #2 pins - device or host.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm/mach-pxa/Kconfig  | 7 +++++++
 arch/arm/mach-pxa/Makefile | 1 +
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 11aa739..5fffc4b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -630,6 +630,13 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select HAVE_PWM
 	select PXA27x
+
+config Z2_USB_SWITCH
+	tristate "Control the state of USB port on Zipit Z2"
+	depends on MACH_ZIPIT2
+	help
+	  This is a simple driver that is able to control
+	  usb mode of Zipit Z2
 endif
 endmenu
 
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index ee88d6e..86a032f 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -99,3 +99,4 @@ obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
+obj-$(CONFIG_Z2_USB_SWITCH)	+= z2-usb-switch.o
-- 
1.7.12.4

             reply	other threads:[~2012-10-28 15:35 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-28 15:35 Vasily Khoruzhick [this message]
2012-10-28 15:35 ` [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support Vasily Khoruzhick
2012-10-28 21:59   ` Marek Vasut
2012-10-28 22:38     ` Vasily Khoruzhick
2012-10-28 22:43       ` Marek Vasut
2012-10-28 22:58       ` Daniel Mack
2012-10-29  9:33         ` Vasily Khoruzhick
2012-10-29  9:42           ` Daniel Mack
2012-10-29 10:07             ` Vasily Khoruzhick
2012-10-29 10:22               ` Marek Vasut
2012-10-29 10:26                 ` Vasily Khoruzhick
2012-10-29 10:44               ` Daniel Mack
2012-10-29 10:52                 ` Vasily Khoruzhick
2012-10-29 11:00                   ` Daniel Mack
2012-10-29 11:12                     ` Vasily Khoruzhick
2012-10-29 11:14                       ` Daniel Mack
2012-10-30 20:01                         ` Vasily Khoruzhick
2012-10-30 20:05                           ` Daniel Mack
2012-10-30 21:20                             ` Vasily Khoruzhick
2012-10-31 14:00                             ` Haojian Zhuang
2012-10-31 15:31                             ` Haojian Zhuang
2012-11-02 20:52                               ` Vasily Khoruzhick
2012-11-02 21:29                               ` Vasily Khoruzhick
2012-11-05 17:31                                 ` Vasily Khoruzhick
2012-12-04  8:30                                   ` Haojian Zhuang
2012-10-29 10:48               ` Daniel Mack
2012-10-28 15:35 ` [PATCH 3/5] ARM: PXA: Zipit Z2: Fix oops in z2_power_off Vasily Khoruzhick
2012-10-28 15:35 ` [PATCH 4/5] ARM: PXA: Zipit Z2: Change active_state of power button Vasily Khoruzhick
2012-10-28 22:01   ` Marek Vasut
2012-10-28 22:31     ` mark at engine12.com
2012-10-28 15:35 ` [PATCH 5/5] ARM: PXA: Zipit Z2: Fix backlight PWM device number Vasily Khoruzhick
2012-10-28 22:01   ` Marek Vasut
2012-10-28 22:23     ` Vasily Khoruzhick
2012-10-28 22:39       ` Marek Vasut
2012-10-28 15:39 ` [PATCH 1/5] ARM: PXA: Add z2-usb-switch driver Vasily Khoruzhick
2012-10-28 15:42   ` [PATCH v2 " Vasily Khoruzhick
2012-10-28 17:03     ` Marko Katić
2012-10-28 18:12       ` Vasily Khoruzhick
2012-10-28 21:57     ` Marek Vasut
2012-10-28 22:27       ` Vasily Khoruzhick
2012-10-28 22:38         ` Marek Vasut
2012-10-28 22:45           ` Vasily Khoruzhick
2012-10-28 22:48             ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351438555-4668-1-git-send-email-anarsoul@gmail.com \
    --to=anarsoul@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.