All of lore.kernel.org
 help / color / mirror / Atom feed
From: mrybczyn@kalray.eu (Marta Rybczynska)
Subject: nvme-fabrics: crash at nvme connect-all
Date: Fri, 10 Jun 2016 11:03:43 +0200 (CEST)	[thread overview]
Message-ID: <135617120.33923984.1465549423989.JavaMail.zimbra@kalray.eu> (raw)
In-Reply-To: <009601d1c266$5820eaa0$0862bfe0$@opengridcomputing.com>

----- Le 9 Juin 16, ? 17:48, Steve Wise swise at opengridcomputing.com a ?crit :

>> 
>> 
>> Thanks Marta.  That card has less memory than the T580-CR.  I'm checking with
>> Chelsio on the details.  The "-SO" might mean a mem-free card.
>> 
>> Also, can you email me the output of 'cat
> /sys/kernel/debug/cxgb4/blah/meminfo'?

Here it is:
# cat /sys/kernel/debug/cxgb4/0000\:09\:00.4/meminfo 
EDC0:           0x0-0x2fffff [3.00 MiB]
EDC1:           0x300000-0x5fffff [3.00 MiB]

RQUDP region:   0xffffffff-0xfffffffe [0 B]
DBQ contexts:   0x27fa80-0x28ba7f [48.0 KiB]
IMSG contexts:  0x28ba80-0x297a7f [48.0 KiB]
FLM cache:      0x297a80-0x2d9a7f [264 KiB]
ULPTX state:    0x2d9a80-0x2d9e3f [960 B]
ULPRX state:    0x2d9e40-0x2d9e7f [64.0 B]
Timers:         0x2d9e80-0x2e7e7f [56.0 KiB]
TCBs:           0x2e7e80-0x327fff [256 KiB]
Tx payload:     0x328000-0x3e7fff [768 KiB]
Rx payload:     0x3e8000-0x507fff [1.13 MiB]
Pstructs:       0x508000-0x50afff [12.0 KiB]
Rx FL:          0x50b000-0x50b0bf [192 B]
Tx FL:          0x50b0c0-0x50b13f [128 B]
Pstruct FL:     0x50b140-0x50b33f [512 B]
TDDP region:    0x50b340-0x537b3f [178 KiB]
iSCSI region:   0x537b40-0x557b3f [128 KiB]
TPT region:     0x557b40-0x56df3f [89.0 KiB]
STAG region:    0x557b40-0x56df3f [89.0 KiB]
TXPBL region:   0x56df40-0x5a593f [223 KiB]
PBL region:     0x56df40-0x5a593f [223 KiB]
RQ region:      0x5a5940-0x5f373f [312 KiB]

uP RAM:         0x0-0xffffffff [4.00 GiB]
uP Extmem2:     0x0-0xffffffff [4.00 GiB]

72 Rx pages of size 16KiB for 1 channels
48 Tx pages of size 16KiB for 2 channels
192 p-structs

Port 0 using 2 pages out of 432 allocated
Port 1 using 2 pages out of 432 allocated
Port 2 using 2 pages out of 432 allocated
Port 3 using 2 pages out of 432 allocated
Loopback 0 using 0 pages out of 144 allocated
Loopback 1 using 0 pages out of 144 allocated
Loopback 2 using 0 pages out of 144 allocated
Loopback 3 using 0 pages out of 144 allocated


Marta

  reply	other threads:[~2016-06-10  9:03 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-09  9:18 nvme-fabrics: crash at nvme connect-all Marta Rybczynska
2016-06-09  9:29 ` Sagi Grimberg
2016-06-09 10:07   ` Marta Rybczynska
2016-06-09 11:09     ` Sagi Grimberg
2016-06-09 12:12       ` Marta Rybczynska
2016-06-09 12:30         ` Sagi Grimberg
2016-06-09 13:27           ` Steve Wise
2016-06-09 13:36             ` Steve Wise
2016-06-09 13:48               ` Sagi Grimberg
2016-06-09 14:09                 ` Steve Wise
2016-06-09 14:22                   ` Steve Wise
2016-06-09 14:29                     ` Steve Wise
2016-06-09 15:04                       ` Marta Rybczynska
2016-06-09 15:40                         ` Steve Wise
2016-06-09 15:48                           ` Steve Wise
2016-06-10  9:03                             ` Marta Rybczynska [this message]
2016-06-10 13:40                               ` Steve Wise
2016-06-10 13:42                                 ` Marta Rybczynska
2016-06-10 13:49                                   ` Steve Wise
2016-06-09 13:25   ` Christoph Hellwig
2016-06-09 13:24 ` Christoph Hellwig
2016-06-09 15:37   ` Marta Rybczynska
2016-06-09 20:25     ` Steve Wise
2016-06-09 20:35       ` Ming Lin
2016-06-09 21:06         ` Steve Wise
2016-06-09 22:26           ` Ming Lin
2016-06-09 22:40             ` Steve Wise
     [not found]             ` <055801d1c29f$e164c000$a42e4000$@opengridcomputing.com>
2016-06-10 15:11               ` Steve Wise
2016-06-10 16:22                 ` Steve Wise
2016-06-10 18:43                   ` Ming Lin
2016-06-10 19:17                     ` Steve Wise
2016-06-10 20:00                       ` Ming Lin
2016-06-10 20:15                         ` Steve Wise
2016-06-10 20:18                           ` Ming Lin
2016-06-10 21:14                             ` Steve Wise
2016-06-10 21:20                               ` Ming Lin
2016-06-10 21:25                                 ` Steve Wise

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=135617120.33923984.1465549423989.JavaMail.zimbra@kalray.eu \
    --to=mrybczyn@kalray.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.