From mboxrd@z Thu Jan 1 00:00:00 1970 From: Aaron Lu Subject: [PATCH v13 3/9] libata: move acpi notification code to zpodd Date: Tue, 15 Jan 2013 17:20:59 +0800 Message-ID: <1358241665-2156-4-git-send-email-aaron.lu@intel.com> References: <1358241665-2156-1-git-send-email-aaron.lu@intel.com> Return-path: Received: from mga01.intel.com ([192.55.52.88]:29538 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756637Ab3AOJU2 (ORCPT ); Tue, 15 Jan 2013 04:20:28 -0500 In-Reply-To: <1358241665-2156-1-git-send-email-aaron.lu@intel.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jeff Garzik , James Bottomley , "Rafael J. Wysocki" , Alan Stern , Tejun Heo Cc: Aaron Lu , Jeff Wu , linux-ide@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org, linux-acpi@vger.kernel.org Since the ata acpi notification code introduced in commit 3bd46600a7a7e938c54df8cdbac9910668c7dfb0 is solely for ZPODD, and we now have a dedicated place for it, move these code there. And the ata_acpi_add_pm_notifier code is changed a little bit in that it is now invoked when scsi device is not bound with ACPI yet, so the way to get the acpi handle is different with the previous version. And the ata_acpi_add/remove_pm_notifier is also simplified a little bit in that it doesn't check if the acpi_device for the handle exists or not as the odd_can_poweroff function already checked that. Signed-off-by: Aaron Lu Acked-by: Tejun Heo --- drivers/ata/libata-acpi.c | 71 ---------------------------------------------- drivers/ata/libata-zpodd.c | 34 ++++++++++++++++++++++ 2 files changed, 34 insertions(+), 71 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index ef01ac0..446b4e7 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -974,57 +974,6 @@ void ata_acpi_on_disable(struct ata_device *dev) ata_acpi_clear_gtf(dev); } -static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context) -{ - struct ata_device *ata_dev = context; - - if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev && - pm_runtime_suspended(&ata_dev->sdev->sdev_gendev)) - scsi_autopm_get_device(ata_dev->sdev); -} - -static void ata_acpi_add_pm_notifier(struct ata_device *dev) -{ - struct acpi_device *acpi_dev; - acpi_handle handle; - acpi_status status; - - handle = ata_dev_acpi_handle(dev); - if (!handle) - return; - - status = acpi_bus_get_device(handle, &acpi_dev); - if (ACPI_FAILURE(status)) - return; - - if (dev->sdev->can_power_off) { - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - ata_acpi_wake_dev, dev); - device_set_run_wake(&dev->sdev->sdev_gendev, true); - } -} - -static void ata_acpi_remove_pm_notifier(struct ata_device *dev) -{ - struct acpi_device *acpi_dev; - acpi_handle handle; - acpi_status status; - - handle = ata_dev_acpi_handle(dev); - if (!handle) - return; - - status = acpi_bus_get_device(handle, &acpi_dev); - if (ACPI_FAILURE(status)) - return; - - if (dev->sdev->can_power_off) { - device_set_run_wake(&dev->sdev->sdev_gendev, false); - acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - ata_acpi_wake_dev); - } -} - static void ata_acpi_register_power_resource(struct ata_device *dev) { struct scsi_device *sdev = dev->sdev; @@ -1057,13 +1006,11 @@ static void ata_acpi_unregister_power_resource(struct ata_device *dev) void ata_acpi_bind(struct ata_device *dev) { - ata_acpi_add_pm_notifier(dev); ata_acpi_register_power_resource(dev); } void ata_acpi_unbind(struct ata_device *dev) { - ata_acpi_remove_pm_notifier(dev); ata_acpi_unregister_power_resource(dev); } @@ -1105,9 +1052,6 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev, acpi_handle *handle) { struct ata_device *ata_dev; - acpi_status status; - struct acpi_device *acpi_dev; - struct acpi_device_power_state *states; if (ap->flags & ATA_FLAG_ACPI_SATA) { if (!sata_pmp_attached(ap)) @@ -1124,21 +1068,6 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev, if (!*handle) return -ENODEV; - status = acpi_bus_get_device(*handle, &acpi_dev); - if (ACPI_FAILURE(status)) - return 0; - - /* - * If firmware has _PS3 or _PR3 for this device, - * and this ata ODD device support device attention, - * it means this device can be powered off - */ - states = acpi_dev->power.states; - if ((states[ACPI_STATE_D3_HOT].flags.valid || - states[ACPI_STATE_D3_COLD].flags.explicit_set) && - ata_dev->flags & ATA_DFLAG_DA) - sdev->can_power_off = 1; - return 0; } diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c index 27eed2f..9a0d90d 100644 --- a/drivers/ata/libata-zpodd.c +++ b/drivers/ata/libata-zpodd.c @@ -1,5 +1,7 @@ #include #include +#include +#include #include "libata.h" @@ -12,6 +14,10 @@ enum odd_mech_type { struct zpodd { enum odd_mech_type mech_type; /* init during probe, RO afterwards */ struct ata_device *dev; + + /* The following fields are synchronized by PM core. */ + bool from_notify; /* resumed as a result of + * acpi wake notification */ }; /* Per the spec, only slot type and drawer type ODD can be supported */ @@ -68,6 +74,32 @@ static bool odd_can_poweroff(struct ata_device *ata_dev) return acpi_device_can_poweroff(acpi_dev); } +static void zpodd_wake_dev(acpi_handle handle, u32 event, void *context) +{ + struct ata_device *ata_dev = context; + struct zpodd *zpodd = ata_dev->zpodd; + struct device *dev = &ata_dev->sdev->sdev_gendev; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev && + pm_runtime_suspended(dev)) { + zpodd->from_notify = true; + pm_runtime_resume(dev); + } +} + +static void ata_acpi_add_pm_notifier(struct ata_device *dev) +{ + acpi_handle handle = ata_dev_acpi_handle(dev); + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + zpodd_wake_dev, dev); +} + +static void ata_acpi_remove_pm_notifier(struct ata_device *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->sdev->sdev_gendev); + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, zpodd_wake_dev); +} + void zpodd_init(struct ata_device *dev) { enum odd_mech_type mech_type; @@ -89,12 +121,14 @@ void zpodd_init(struct ata_device *dev) zpodd->mech_type = mech_type; + ata_acpi_add_pm_notifier(dev); zpodd->dev = dev; dev->zpodd = zpodd; } void zpodd_exit(struct ata_device *dev) { + ata_acpi_remove_pm_notifier(dev); kfree(dev->zpodd); dev->zpodd = NULL; } -- 1.7.11.7