From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajeshwari Shinde Date: Mon, 21 Jan 2013 16:22:36 +0530 Subject: [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095 In-Reply-To: <1358765559-32709-1-git-send-email-rajeshwari.s@samsung.com> References: <1358765559-32709-1-git-send-email-rajeshwari.s@samsung.com> Message-ID: <1358765559-32709-5-git-send-email-rajeshwari.s@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch sets high a GPIO to enable the codec MAX98095 Signed-off-by: Rajeshwari Shinde --- board/samsung/smdk5250/smdk5250.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 12cc03e..6f2e067 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -56,6 +56,18 @@ int board_usb_vbus_init(void) } #endif +#ifdef CONFIG_SOUND_MAX98095 +static void board_enable_audio_codec(void) +{ + struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) + samsung_get_base_gpio_part1(); + + /* Enable MAX98095 Codec */ + s5p_gpio_direction_output(&gpio1->x1, 7, 1); + s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE); +} +#endif + int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); @@ -65,6 +77,9 @@ int board_init(void) #ifdef CONFIG_USB_EHCI_EXYNOS board_usb_vbus_init(); #endif +#ifdef CONFIG_SOUND_MAX98095 + board_enable_audio_codec(); +#endif return 0; } -- 1.7.4.4