From: John Crispin <blogic@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
Subject: [RFC 09/11] MIPS: ralink: adds support for RT305x SoC family
Date: Wed, 23 Jan 2013 13:05:53 +0100 [thread overview]
Message-ID: <1358942755-25371-10-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1358942755-25371-1-git-send-email-blogic@openwrt.org>
Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/rt305x.h | 139 +++++++++++++++++
arch/mips/ralink/rt305x.c | 231 ++++++++++++++++++++++++++++
2 files changed, 370 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/rt305x.h
create mode 100644 arch/mips/ralink/rt305x.c
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
new file mode 100644
index 0000000..7d344f2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -0,0 +1,139 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _RT305X_REGS_H_
+#define _RT305X_REGS_H_
+
+enum rt305x_soc_type {
+ RT305X_SOC_UNKNOWN = 0,
+ RT305X_SOC_RT3050,
+ RT305X_SOC_RT3052,
+ RT305X_SOC_RT3350,
+ RT305X_SOC_RT3352,
+ RT305X_SOC_RT5350,
+};
+
+extern enum rt305x_soc_type rt305x_soc;
+
+static inline int soc_is_rt3050(void)
+{
+ return rt305x_soc == RT305X_SOC_RT3050;
+}
+
+static inline int soc_is_rt3052(void)
+{
+ return rt305x_soc == RT305X_SOC_RT3052;
+}
+
+static inline int soc_is_rt305x(void)
+{
+ return soc_is_rt3050() || soc_is_rt3052();
+}
+
+static inline int soc_is_rt3350(void)
+{
+ return rt305x_soc == RT305X_SOC_RT3350;
+}
+
+static inline int soc_is_rt3352(void)
+{
+ return rt305x_soc == RT305X_SOC_RT3352;
+}
+
+static inline int soc_is_rt5350(void)
+{
+ return rt305x_soc == RT305X_SOC_RT5350;
+}
+
+#define RT305X_SYSC_BASE 0x10000000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_ID 0x0c
+#define SYSC_REG_SYSTEM_CONFIG 0x10
+
+#define RT3052_CHIP_NAME0 0x30335452
+#define RT3052_CHIP_NAME1 0x20203235
+
+#define RT3350_CHIP_NAME0 0x33335452
+#define RT3350_CHIP_NAME1 0x20203035
+
+#define RT3352_CHIP_NAME0 0x33335452
+#define RT3352_CHIP_NAME1 0x20203235
+
+#define RT5350_CHIP_NAME0 0x33355452
+#define RT5350_CHIP_NAME1 0x20203035
+
+#define CHIP_ID_ID_MASK 0xff
+#define CHIP_ID_ID_SHIFT 8
+#define CHIP_ID_REV_MASK 0xff
+
+#define RT305X_SYSCFG_CPUCLK_SHIFT 18
+#define RT305X_SYSCFG_CPUCLK_MASK 0x1
+#define RT305X_SYSCFG_CPUCLK_LOW 0x0
+#define RT305X_SYSCFG_CPUCLK_HIGH 0x1
+
+#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2
+#define RT305X_SYSCFG_CPUCLK_MASK 0x1
+#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1
+
+#define RT3352_SYSCFG0_CPUCLK_SHIFT 8
+#define RT3352_SYSCFG0_CPUCLK_MASK 0x1
+#define RT3352_SYSCFG0_CPUCLK_LOW 0x0
+#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1
+
+#define RT5350_SYSCFG0_CPUCLK_SHIFT 8
+#define RT5350_SYSCFG0_CPUCLK_MASK 0x3
+#define RT5350_SYSCFG0_CPUCLK_360 0x0
+#define RT5350_SYSCFG0_CPUCLK_320 0x2
+#define RT5350_SYSCFG0_CPUCLK_300 0x3
+
+/* multi function gpio pins */
+#define RT305X_GPIO_I2C_SD 1
+#define RT305X_GPIO_I2C_SCLK 2
+#define RT305X_GPIO_SPI_EN 3
+#define RT305X_GPIO_SPI_CLK 4
+/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */
+#define RT305X_GPIO_7 7
+#define RT305X_GPIO_10 10
+#define RT305X_GPIO_14 14
+#define RT305X_GPIO_UART1_TXD 15
+#define RT305X_GPIO_UART1_RXD 16
+#define RT305X_GPIO_JTAG_TDO 17
+#define RT305X_GPIO_JTAG_TDI 18
+#define RT305X_GPIO_MDIO_MDC 22
+#define RT305X_GPIO_MDIO_MDIO 23
+#define RT305X_GPIO_SDRAM_MD16 24
+#define RT305X_GPIO_SDRAM_MD31 39
+#define RT305X_GPIO_GE0_TXD0 40
+#define RT305X_GPIO_GE0_RXCLK 51
+
+#define RT305X_GPIO_MODE_I2C BIT(0)
+#define RT305X_GPIO_MODE_SPI BIT(1)
+#define RT305X_GPIO_MODE_UART0_SHIFT 2
+#define RT305X_GPIO_MODE_UART0_MASK 0x7
+#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
+#define RT305X_GPIO_MODE_UARTF 0x0
+#define RT305X_GPIO_MODE_PCM_UARTF 0x1
+#define RT305X_GPIO_MODE_PCM_I2S 0x2
+#define RT305X_GPIO_MODE_I2S_UARTF 0x3
+#define RT305X_GPIO_MODE_PCM_GPIO 0x4
+#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
+#define RT305X_GPIO_MODE_GPIO_I2S 0x6
+#define RT305X_GPIO_MODE_GPIO 0x7
+#define RT305X_GPIO_MODE_UART1 BIT(5)
+#define RT305X_GPIO_MODE_JTAG BIT(6)
+#define RT305X_GPIO_MODE_MDIO BIT(7)
+#define RT305X_GPIO_MODE_SDRAM BIT(8)
+#define RT305X_GPIO_MODE_RGMII BIT(9)
+
+#endif
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
new file mode 100644
index 0000000..23ea087
--- /dev/null
+++ b/arch/mips/ralink/rt305x.c
@@ -0,0 +1,231 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt305x.h>
+
+#include "common.h"
+
+enum rt305x_soc_type rt305x_soc;
+
+struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT305X_GPIO_MODE_I2C,
+ .gpio_first = RT305X_GPIO_I2C_SD,
+ .gpio_last = RT305X_GPIO_I2C_SCLK,
+ }, {
+ .name = "spi",
+ .mask = RT305X_GPIO_MODE_SPI,
+ .gpio_first = RT305X_GPIO_SPI_EN,
+ .gpio_last = RT305X_GPIO_SPI_CLK,
+ }, {
+ .name = "uartlite",
+ .mask = RT305X_GPIO_MODE_UART1,
+ .gpio_first = RT305X_GPIO_UART1_TXD,
+ .gpio_last = RT305X_GPIO_UART1_RXD,
+ }, {
+ .name = "jtag",
+ .mask = RT305X_GPIO_MODE_JTAG,
+ .gpio_first = RT305X_GPIO_JTAG_TDO,
+ .gpio_last = RT305X_GPIO_JTAG_TDI,
+ }, {
+ .name = "mdio",
+ .mask = RT305X_GPIO_MODE_MDIO,
+ .gpio_first = RT305X_GPIO_MDIO_MDC,
+ .gpio_last = RT305X_GPIO_MDIO_MDIO,
+ }, {
+ .name = "sdram",
+ .mask = RT305X_GPIO_MODE_SDRAM,
+ .gpio_first = RT305X_GPIO_SDRAM_MD16,
+ .gpio_last = RT305X_GPIO_SDRAM_MD31,
+ }, {
+ .name = "rgmii",
+ .mask = RT305X_GPIO_MODE_RGMII,
+ .gpio_first = RT305X_GPIO_GE0_TXD0,
+ .gpio_last = RT305X_GPIO_GE0_RXCLK,
+ }, {0}
+};
+
+struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = RT305X_GPIO_MODE_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm uartf",
+ .mask = RT305X_GPIO_MODE_PCM_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm i2s",
+ .mask = RT305X_GPIO_MODE_PCM_I2S,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "i2s uartf",
+ .mask = RT305X_GPIO_MODE_I2S_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm gio",
+ .mask = RT305X_GPIO_MODE_PCM_GPIO,
+ .gpio_first = RT305X_GPIO_10,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio uartf",
+ .mask = RT305X_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio i2s",
+ .mask = RT305X_GPIO_MODE_GPIO_I2S,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio",
+ .mask = RT305X_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+void rt305x_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on pin SRAM_CS_N */
+ t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
+ RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
+ rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
+}
+
+struct ralink_pinmux gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+ .wdt_reset = rt305x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+
+ if (soc_is_rt305x() || soc_is_rt3350()) {
+ t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
+ RT305X_SYSCFG_CPUCLK_MASK;
+ switch (t) {
+ case RT305X_SYSCFG_CPUCLK_LOW:
+ cpu_rate = 320000000;
+ break;
+ case RT305X_SYSCFG_CPUCLK_HIGH:
+ cpu_rate = 384000000;
+ break;
+ }
+ sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
+ } else if (soc_is_rt3352()) {
+ t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
+ RT3352_SYSCFG0_CPUCLK_MASK;
+ switch (t) {
+ case RT3352_SYSCFG0_CPUCLK_LOW:
+ cpu_rate = 384000000;
+ break;
+ case RT3352_SYSCFG0_CPUCLK_HIGH:
+ cpu_rate = 400000000;
+ break;
+ }
+ sys_rate = wdt_rate = cpu_rate / 3;
+ uart_rate = 40000000;
+ } else if (soc_is_rt5350()) {
+ t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
+ RT5350_SYSCFG0_CPUCLK_MASK;
+ switch (t) {
+ case RT5350_SYSCFG0_CPUCLK_360:
+ cpu_rate = 360000000;
+ sys_rate = cpu_rate / 3;
+ break;
+ case RT5350_SYSCFG0_CPUCLK_320:
+ cpu_rate = 320000000;
+ sys_rate = cpu_rate / 4;
+ break;
+ case RT5350_SYSCFG0_CPUCLK_300:
+ cpu_rate = 300000000;
+ sys_rate = cpu_rate / 3;
+ break;
+ default:
+ BUG();
+ }
+ uart_rate = 40000000;
+ wdt_rate = sys_rate;
+ } else {
+ BUG();
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000100.timer", wdt_rate);
+ ralink_clk_add("10000500.uart", uart_rate);
+ ralink_clk_add("10000c00.uartlite", uart_rate);
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+ unsigned long icache_sets;
+
+ icache_sets = (read_c0_config1() >> 22) & 7;
+ if (icache_sets == 1) {
+ rt305x_soc = RT305X_SOC_RT3050;
+ soc_info->name = "RT3050";
+ soc_info->compatible = "ralink,rt3050";
+ } else {
+ rt305x_soc = RT305X_SOC_RT3052;
+ soc_info->name = "RT3052";
+ soc_info->compatible = "ralink,rt3052";
+ }
+ } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT3350;
+ soc_info->name = "RT3350";
+ soc_info->compatible = "ralink,rt3250";
+ } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT3352;
+ soc_info->name = "RT3352";
+ soc_info->compatible = "ralink,rt3352";
+ } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT5350;
+ soc_info->name = "RT5350";
+ soc_info->compatible = "ralink,rt5350";
+ } else {
+ panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s id:%u rev:%u",
+ soc_info->name,
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ (id & CHIP_ID_REV_MASK));
+}
--
1.7.10.4
next prev parent reply other threads:[~2013-01-23 12:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-23 12:05 [RFC 00/11] MIPS: ralink: adds support for ralink platform John Crispin
2013-01-23 12:05 ` [RFC 01/11] MIPS: allow platforms to override cp0_compare_irq John Crispin
[not found] ` <5101043A.6080009@openwrt.org>
2013-01-24 10:00 ` John Crispin
2013-01-23 12:05 ` [RFC 02/11] MIPS: ralink: adds include files John Crispin
2013-01-24 10:34 ` Gabor Juhos
2013-01-23 12:05 ` [RFC 03/11] MIPS: ralink: adds irq code John Crispin
2013-01-24 10:44 ` Gabor Juhos
2013-01-23 12:05 ` [RFC 04/11] MIPS: ralink: adds reset code John Crispin
2013-01-23 12:05 ` [RFC 05/11] MIPS: ralink: adds prom and cmdline code John Crispin
2013-01-24 11:52 ` Gabor Juhos
2013-01-23 12:05 ` [RFC 06/11] MIPS: ralink: adds clkdev code John Crispin
2013-01-23 12:05 ` [RFC 07/11] MIPS: ralink: adds OF code John Crispin
2013-01-24 13:20 ` Gabor Juhos
2013-01-23 12:05 ` [RFC 08/11] MIPS: ralink: adds early_printk support John Crispin
2013-01-23 19:23 ` Florian Fainelli
2013-01-23 21:54 ` Sergei Shtylyov
2013-01-23 22:15 ` Sergei Shtylyov
2013-01-24 6:57 ` John Crispin
2013-01-24 7:23 ` John Crispin
2013-01-24 7:25 ` John Crispin
2013-01-24 9:58 ` Florian Fainelli
2013-01-24 12:02 ` Sergei Shtylyov
2013-01-24 12:11 ` Gabor Juhos
2013-01-23 12:05 ` John Crispin [this message]
2013-01-24 12:27 ` [RFC 09/11] MIPS: ralink: adds support for RT305x SoC family Gabor Juhos
2013-01-23 12:05 ` [RFC 10/11] MIPS: ralink: adds rt305x devicetree John Crispin
2013-01-24 13:52 ` Gabor Juhos
2013-01-23 12:05 ` [RFC 11/11] MIPS: ralink: adds Kbuild files John Crispin
2013-01-24 13:59 ` Gabor Juhos
2013-01-24 15:06 ` John Crispin
2013-01-23 19:25 ` [RFC 00/11] MIPS: ralink: adds support for ralink platform Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358942755-25371-10-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.