From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Kirsher Subject: [net-next 11/14] ixgbe: Modularize SR-IOV enablement code Date: Wed, 23 Jan 2013 14:44:47 -0800 Message-ID: <1358981090-5794-12-git-send-email-jeffrey.t.kirsher@intel.com> References: <1358981090-5794-1-git-send-email-jeffrey.t.kirsher@intel.com> Cc: Greg Rose , netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com, Don Dutile , Jeff Kirsher To: davem@davemloft.net Return-path: Received: from mga03.intel.com ([143.182.124.21]:52933 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752546Ab3AWWpU (ORCPT ); Wed, 23 Jan 2013 17:45:20 -0500 In-Reply-To: <1358981090-5794-1-git-send-email-jeffrey.t.kirsher@intel.com> Sender: netdev-owner@vger.kernel.org List-ID: From: Greg Rose In preparation for enable/disable of SR-IOV via the PCI sysfs interface move some core SR-IOV enablement code that would be common to module parameter usage or callback from the PCI bus driver to a separate function so that it can be used by either method. Signed-off-by: Greg Rose CC: Don Dutile Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 94 +++++++++++++++----------- 1 file changed, 54 insertions(+), 40 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 029c863..8a284ac 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -44,49 +44,11 @@ #include "ixgbe_sriov.h" #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) +static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; int num_vf_macvlans, i; struct vf_macvlans *mv_list; - int pre_existing_vfs = 0; - - pre_existing_vfs = pci_num_vf(adapter->pdev); - if (!pre_existing_vfs && !adapter->num_vfs) - return; - - /* If there are pre-existing VFs then we have to force - * use of that many because they were not deleted the last - * time someone removed the PF driver. That would have - * been because they were allocated to guest VMs and can't - * be removed. Go ahead and just re-enable the old amount. - * If the user wants to change the number of VFs they can - * use ethtool while making sure no VFs are allocated to - * guest VMs... i.e. the right way. - */ - if (pre_existing_vfs) { - adapter->num_vfs = pre_existing_vfs; - dev_warn(&adapter->pdev->dev, "Virtual Functions already " - "enabled for this device - Please reload all " - "VF drivers to avoid spoofed packet errors\n"); - } else { - int err; - /* - * The 82599 supports up to 64 VFs per physical function - * but this implementation limits allocation to 63 so that - * basic networking resources are still available to the - * physical function. If the user requests greater thn - * 63 VFs then it is an error - reset to default of zero. - */ - adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); - - err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); - if (err) { - e_err(probe, "Failed to enable PCI sriov: %d\n", err); - adapter->num_vfs = 0; - return; - } - } adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED; e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs); @@ -150,10 +112,62 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) /* enable spoof checking for all VFs */ for (i = 0; i < adapter->num_vfs; i++) adapter->vfinfo[i].spoofchk_enabled = true; + return 0; + } + + return -ENOMEM; +} + +/* Note this function is called when the user wants to enable SR-IOV + * VFs using the now deprecated module parameter + */ +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) +{ + int pre_existing_vfs = 0; + + pre_existing_vfs = pci_num_vf(adapter->pdev); + if (!pre_existing_vfs && !adapter->num_vfs) return; + + if (!pre_existing_vfs) + dev_warn(&adapter->pdev->dev, + "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n"); + + /* If there are pre-existing VFs then we have to force + * use of that many - over ride any module parameter value. + * This may result from the user unloading the PF driver + * while VFs were assigned to guest VMs or because the VFs + * have been created via the new PCI SR-IOV sysfs interface. + */ + if (pre_existing_vfs) { + adapter->num_vfs = pre_existing_vfs; + dev_warn(&adapter->pdev->dev, + "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n"); + } else { + int err; + /* + * The 82599 supports up to 64 VFs per physical function + * but this implementation limits allocation to 63 so that + * basic networking resources are still available to the + * physical function. If the user requests greater thn + * 63 VFs then it is an error - reset to default of zero. + */ + adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); + + err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); + if (err) { + e_err(probe, "Failed to enable PCI sriov: %d\n", err); + adapter->num_vfs = 0; + return; + } } - /* Oh oh */ + if (!__ixgbe_enable_sriov(adapter)) + return; + + /* If we have gotten to this point then there is no memory available + * to manage the VF devices - print message and bail. + */ e_err(probe, "Unable to allocate memory for VF Data Storage - " "SRIOV disabled\n"); ixgbe_disable_sriov(adapter); -- 1.7.11.7