From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Subject: [PATCH 05/14] mac80211: handle VHT operating mode notification
Date: Mon, 11 Feb 2013 13:38:09 +0100 [thread overview]
Message-ID: <1360586298-15028-6-git-send-email-johannes@sipsolutions.net> (raw)
In-Reply-To: <1360586298-15028-1-git-send-email-johannes@sipsolutions.net>
From: Johannes Berg <johannes.berg@intel.com>
Handle the operating mode notification action frame.
When the supported streams or the bandwidth change
let the driver and rate control algorithm know.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
include/linux/ieee80211.h | 1 +
include/net/mac80211.h | 3 ++
net/mac80211/ht.c | 4 ++
net/mac80211/ieee80211_i.h | 3 ++
net/mac80211/rx.c | 30 +++++++++++++++
net/mac80211/sta_info.h | 4 ++
net/mac80211/vht.c | 93 +++++++++++++++++++++++++++++++++++++++++-----
7 files changed, 128 insertions(+), 10 deletions(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 602c99f..4aed928 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1313,6 +1313,7 @@ struct ieee80211_vht_operation {
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C
#define IEEE80211_VHT_CAP_RXLDPC 0x00000010
#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020
#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 972253a..a3a0bdf 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2107,11 +2107,14 @@ enum ieee80211_frame_release_type {
* @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer
* changed (in IBSS mode) due to discovering more information about
* the peer.
+ * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed
+ * by the peer
*/
enum ieee80211_rate_control_changed {
IEEE80211_RC_BW_CHANGED = BIT(0),
IEEE80211_RC_SMPS_CHANGED = BIT(1),
IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2),
+ IEEE80211_RC_NSS_CHANGED = BIT(3),
};
/**
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index a64b4f0..797969b 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -212,6 +212,10 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata,
changed = true;
sta->sta.bandwidth = bw;
+ sta->cur_max_bandwidth =
+ ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
+ IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
+
return changed;
}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 741736d..5206b2d 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1422,6 +1422,9 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta);
enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
void ieee80211_sta_set_rx_nss(struct sta_info *sta);
+void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta, u8 opmode,
+ enum ieee80211_band band);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 8a861a5..1617e0b 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2436,6 +2436,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
}
break;
+ case WLAN_CATEGORY_VHT:
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+ sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+ sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
+ break;
+
+ /* verify action code is present */
+ if (len < IEEE80211_MIN_ACTION_SIZE + 1)
+ goto invalid;
+
+ switch (mgmt->u.action.u.vht_opmode_notif.action_code) {
+ case WLAN_VHT_ACTION_OPMODE_NOTIF: {
+ u8 opmode;
+
+ /* verify opmode is present */
+ if (len < IEEE80211_MIN_ACTION_SIZE + 2)
+ goto invalid;
+
+ opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
+
+ ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
+ opmode, status->band);
+ goto handled;
+ }
+ default:
+ break;
+ }
+ break;
case WLAN_CATEGORY_BACK:
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 03c42f8..63dfdb5 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -297,6 +297,8 @@ struct sta_ampdu_mlme {
* @sta_state: duplicates information about station state (for debug)
* @beacon_loss_count: number of times beacon loss has triggered
* @rcu_head: RCU head used for freeing this station struct
+ * @cur_max_bandwidth: maximum bandwidth to use for TX to the station,
+ * taken from HT/VHT capabilities or VHT operating mode notification
*/
struct sta_info {
/* General information, mostly static */
@@ -398,6 +400,8 @@ struct sta_info {
} debugfs;
#endif
+ enum ieee80211_sta_rx_bandwidth cur_max_bandwidth;
+
unsigned int lost_packets;
unsigned int beacon_loss_count;
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 67436e3..c9bfbd7 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -10,6 +10,7 @@
#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "rate.h"
void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
@@ -39,6 +40,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs,
sizeof(struct ieee80211_vht_mcs_info));
+ switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
+ case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
+ case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
+ break;
+ default:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
+ }
+
sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta);
}
@@ -46,12 +56,13 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 cap = sta->sta.vht_cap.cap;
+ enum ieee80211_sta_rx_bandwidth bw;
- if (!sta->sta.vht_cap.vht_supported)
- return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
+ if (!sta->sta.vht_cap.vht_supported) {
+ bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
-
- /* TODO: handle VHT opmode notification data */
+ goto check_max;
+ }
switch (sdata->vif.bss_conf.chandef.width) {
default:
@@ -60,19 +71,31 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta)
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_40:
- return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
+ bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
+ break;
case NL80211_CHAN_WIDTH_160:
- if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)
- return IEEE80211_STA_RX_BW_160;
+ if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) ==
+ IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) {
+ bw = IEEE80211_STA_RX_BW_160;
+ break;
+ }
/* fall through */
case NL80211_CHAN_WIDTH_80P80:
- if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
- return IEEE80211_STA_RX_BW_160;
+ if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) ==
+ IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) {
+ bw = IEEE80211_STA_RX_BW_160;
+ break;
+ }
/* fall through */
case NL80211_CHAN_WIDTH_80:
- return IEEE80211_STA_RX_BW_80;
+ bw = IEEE80211_STA_RX_BW_80;
}
+
+ check_max:
+ if (bw > sta->cur_max_bandwidth)
+ bw = sta->cur_max_bandwidth;
+ return bw;
}
void ieee80211_sta_set_rx_nss(struct sta_info *sta)
@@ -115,3 +138,53 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta)
ht_rx_nss = max(ht_rx_nss, vht_rx_nss);
sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss);
}
+
+void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta, u8 opmode,
+ enum ieee80211_band band)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_supported_band *sband;
+ enum ieee80211_sta_rx_bandwidth new_bw;
+ u32 changed = 0;
+ u8 nss;
+
+ sband = local->hw.wiphy->bands[band];
+
+ /* ignore - no support for BF yet */
+ if (opmode & IEEE80211_VHT_OPMODE_RX_NSS_TYPE_BF)
+ return;
+
+ nss = opmode & IEEE80211_VHT_OPMODE_RX_NSS_MASK;
+ nss >>= IEEE80211_VHT_OPMODE_RX_NSS_SHIFT;
+ nss += 1;
+
+ if (sta->sta.rx_nss != nss) {
+ sta->sta.rx_nss = nss;
+ changed |= IEEE80211_RC_NSS_CHANGED;
+ }
+
+ switch (opmode & IEEE80211_VHT_OPMODE_CHANWIDTH_MASK) {
+ case IEEE80211_VHT_OPMODE_CHANWIDTH_20MHZ:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
+ break;
+ case IEEE80211_VHT_OPMODE_CHANWIDTH_40MHZ:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40;
+ break;
+ case IEEE80211_VHT_OPMODE_CHANWIDTH_80MHZ:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
+ break;
+ case IEEE80211_VHT_OPMODE_CHANWIDTH_160MHZ:
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
+ break;
+ }
+
+ new_bw = ieee80211_sta_cur_vht_bw(sta);
+ if (new_bw != sta->sta.bandwidth) {
+ sta->sta.bandwidth = new_bw;
+ changed |= IEEE80211_RC_NSS_CHANGED;
+ }
+
+ if (changed)
+ rate_control_rate_update(local, sband, sta, changed);
+}
--
1.8.0
next prev parent reply other threads:[~2013-02-11 12:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <[PATCH 00/14] mac80211: HT/VHT handling>
2013-02-11 12:38 ` Johannes Berg
2013-02-11 12:38 ` [PATCH 01/14] mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_cap Johannes Berg
2013-02-11 12:38 ` [PATCH 02/14] mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 Johannes Berg
2013-02-11 12:38 ` [PATCH 03/14] wireless: define operating mode action frame Johannes Berg
2013-02-11 12:38 ` [PATCH 04/14] mac80211: track number of spatial streams Johannes Berg
2013-02-11 12:38 ` Johannes Berg [this message]
2013-02-11 12:38 ` [PATCH 06/14] mac80211: init HT TX data before rate control Johannes Berg
2013-02-11 12:38 ` [PATCH 07/14] mac80211: fix HT/VHT disable flags Johannes Berg
2013-02-11 12:38 ` [PATCH 08/14] mac80211: fix ieee80211_change_chandef name Johannes Berg
2013-02-11 12:38 ` [PATCH 09/14] mac80211: handle operating mode notif in beacon/assoc response Johannes Berg
2013-02-11 12:38 ` [PATCH 10/14] mac80211: disable HT/VHT if AP has no HT/VHT capability Johannes Berg
2013-02-11 12:38 ` [PATCH 11/14] mac80211: clean up channel use in ieee80211_config_ht_tx Johannes Berg
2013-02-11 12:38 ` [PATCH 12/14] mac80211: add ieee80211_vif_change_bandwidth Johannes Berg
2013-02-11 12:38 ` [PATCH 13/14] mac80211: move ieee80211_determine_chantype function Johannes Berg
2013-02-11 12:38 ` [PATCH 14/14] mac80211: properly track HT/VHT operation changes Johannes Berg
2013-02-14 17:40 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360586298-15028-6-git-send-email-johannes@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.