All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gabor Juhos <juhosg@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <blogic@openwrt.org>,
	linux-mips <linux-mips@linux-mips.org>,
	Gabor Juhos <juhosg@openwrt.org>,
	"Rodriguez, Luis" <rodrigue@qca.qualcomm.com>,
	"Giori, Kathy" <kgiori@qca.qualcomm.com>,
	QCA Linux Team <qca-linux-team@qca.qualcomm.com>
Subject: [PATCH 04/11] MIPS: ath79: add IRQ handling code for the QCA955X SoCs
Date: Fri, 15 Feb 2013 15:38:18 +0100	[thread overview]
Message-ID: <1360939105-23591-5-git-send-email-juhosg@openwrt.org> (raw)
In-Reply-To: <1360939105-23591-1-git-send-email-juhosg@openwrt.org>

The IRQ routing in the QCA955x SoCs is slightly
different from the routing implemented in the
already supported SoCs.

Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com>
Cc: Giori, Kathy <kgiori@qca.qualcomm.com>
Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 arch/mips/ath79/irq.c                          |  110 ++++++++++++++++++++++--
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h |   32 +++++++
 arch/mips/include/asm/mach-ath79/irq.h         |    6 +-
 3 files changed, 140 insertions(+), 8 deletions(-)

diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index df88d49..b0f85a6 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -103,7 +103,10 @@ static void __init ath79_misc_irq_init(void)
 
 	if (soc_is_ar71xx() || soc_is_ar913x())
 		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
+	else if (soc_is_ar724x() ||
+		 soc_is_ar933x() ||
+		 soc_is_ar934x() ||
+		 soc_is_qca955x())
 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
 	else
 		BUG();
@@ -150,6 +153,88 @@ static void ar934x_ip2_irq_init(void)
 	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
 }
 
+static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+	u32 status;
+
+	disable_irq_nosync(irq);
+
+	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+	status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
+
+	if (status == 0) {
+		spurious_interrupt();
+		goto enable;
+	}
+
+	if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP2_IRQ(0));
+	}
+
+	if (status & QCA955X_EXT_INT_WMAC_ALL) {
+		/* TODO: flsuh DDR? */
+		generic_handle_irq(ATH79_IP2_IRQ(1));
+	}
+
+enable:
+	enable_irq(irq);
+}
+
+static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+	u32 status;
+
+	disable_irq_nosync(irq);
+
+	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+	status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
+		  QCA955X_EXT_INT_USB1 |
+		  QCA955X_EXT_INT_USB2;
+
+	if (status == 0) {
+		spurious_interrupt();
+		goto enable;
+	}
+
+	if (status & QCA955X_EXT_INT_USB1) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(0));
+	}
+
+	if (status & QCA955X_EXT_INT_USB2) {
+		/* TODO: flsuh DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(1));
+	}
+
+	if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(2));
+	}
+
+enable:
+	enable_irq(irq);
+}
+
+static void qca955x_irq_init(void)
+{
+	int i;
+
+	for (i = ATH79_IP2_IRQ_BASE;
+	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+		irq_set_chip_and_handler(i, &dummy_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+
+	for (i = ATH79_IP3_IRQ_BASE;
+	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+		irq_set_chip_and_handler(i, &dummy_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+}
+
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned long pending;
@@ -185,6 +270,17 @@ asmlinkage void plat_irq_dispatch(void)
  * Issue a flush in the handlers to ensure that the driver sees
  * the update.
  */
+
+static void ath79_default_ip2_handler(void)
+{
+	do_IRQ(ATH79_CPU_IRQ(2));
+}
+
+static void ath79_default_ip3_handler(void)
+{
+	do_IRQ(ATH79_CPU_IRQ(3));
+}
+
 static void ar71xx_ip2_handler(void)
 {
 	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
@@ -209,11 +305,6 @@ static void ar933x_ip2_handler(void)
 	do_IRQ(ATH79_CPU_IRQ(2));
 }
 
-static void ar934x_ip2_handler(void)
-{
-	do_IRQ(ATH79_CPU_IRQ(2));
-}
-
 static void ar71xx_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
@@ -259,8 +350,11 @@ void __init arch_init_irq(void)
 		ath79_ip2_handler = ar933x_ip2_handler;
 		ath79_ip3_handler = ar933x_ip3_handler;
 	} else if (soc_is_ar934x()) {
-		ath79_ip2_handler = ar934x_ip2_handler;
+		ath79_ip2_handler = ath79_default_ip2_handler;
 		ath79_ip3_handler = ar934x_ip3_handler;
+	} else if (soc_is_qca955x()) {
+		ath79_ip2_handler = ath79_default_ip2_handler;
+		ath79_ip3_handler = ath79_default_ip3_handler;
 	} else {
 		BUG();
 	}
@@ -271,4 +365,6 @@ void __init arch_init_irq(void)
 
 	if (soc_is_ar934x())
 		ar934x_ip2_irq_init();
+	else if (soc_is_qca955x())
+		qca955x_irq_init();
 }
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index 7b00e12..8782d8b 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -300,6 +300,7 @@
 #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
 
 #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
+#define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
 
 #define MISC_INT_ETHSW			BIT(12)
 #define MISC_INT_TIMER4			BIT(10)
@@ -398,6 +399,37 @@
 	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
 	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
 
+#define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
+#define QCA955X_EXT_INT_WMAC_TX			BIT(1)
+#define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
+#define QCA955X_EXT_INT_WMAC_RXHP		BIT(3)
+#define QCA955X_EXT_INT_PCIE_RC1		BIT(4)
+#define QCA955X_EXT_INT_PCIE_RC1_INT0		BIT(5)
+#define QCA955X_EXT_INT_PCIE_RC1_INT1		BIT(6)
+#define QCA955X_EXT_INT_PCIE_RC1_INT2		BIT(7)
+#define QCA955X_EXT_INT_PCIE_RC1_INT3		BIT(8)
+#define QCA955X_EXT_INT_PCIE_RC2		BIT(12)
+#define QCA955X_EXT_INT_PCIE_RC2_INT0		BIT(13)
+#define QCA955X_EXT_INT_PCIE_RC2_INT1		BIT(14)
+#define QCA955X_EXT_INT_PCIE_RC2_INT2		BIT(15)
+#define QCA955X_EXT_INT_PCIE_RC2_INT3		BIT(16)
+#define QCA955X_EXT_INT_USB1			BIT(24)
+#define QCA955X_EXT_INT_USB2			BIT(28)
+
+#define QCA955X_EXT_INT_WMAC_ALL \
+	(QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
+	 QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
+
+#define QCA955X_EXT_INT_PCIE_RC1_ALL \
+	(QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
+	 QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
+	 QCA955X_EXT_INT_PCIE_RC1_INT3)
+
+#define QCA955X_EXT_INT_PCIE_RC2_ALL \
+	(QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
+	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+	 QCA955X_EXT_INT_PCIE_RC2_INT3)
+
 #define REV_ID_MAJOR_MASK		0xfff0
 #define REV_ID_MAJOR_AR71XX		0x00a0
 #define REV_ID_MAJOR_AR913X		0x00b0
diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h
index 23e2bba..5c9ca76 100644
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,7 +10,7 @@
 #define __ASM_MACH_ATH79_IRQ_H
 
 #define MIPS_CPU_IRQ_BASE	0
-#define NR_IRQS			48
+#define NR_IRQS			51
 
 #define ATH79_CPU_IRQ(_x)	(MIPS_CPU_IRQ_BASE + (_x))
 
@@ -26,6 +26,10 @@
 #define ATH79_IP2_IRQ_COUNT	2
 #define ATH79_IP2_IRQ(_x)	(ATH79_IP2_IRQ_BASE + (_x))
 
+#define ATH79_IP3_IRQ_BASE	(ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT)
+#define ATH79_IP3_IRQ_COUNT     3
+#define ATH79_IP3_IRQ(_x)       (ATH79_IP3_IRQ_BASE + (_x))
+
 #include_next <irq.h>
 
 #endif /* __ASM_MACH_ATH79_IRQ_H */
-- 
1.7.10

  parent reply	other threads:[~2013-02-15 14:40 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-15 14:38 [PATCH 00/11] MIPS: ath79: add support for the QCA955X SoCs Gabor Juhos
2013-02-15 14:38 ` [PATCH 01/11] MIPS: ath79: add early printk " Gabor Juhos
2013-02-15 14:38 ` [PATCH 02/11] MIPS: ath79: add SoC detection code " Gabor Juhos
2013-02-15 16:00   ` John Crispin
2013-02-15 16:42     ` Gabor Juhos
2013-02-15 14:38 ` [PATCH 03/11] MIPS: ath79: add clock setup " Gabor Juhos
2013-02-15 14:38 ` Gabor Juhos [this message]
2013-02-15 16:01   ` [PATCH 04/11] MIPS: ath79: add IRQ handling " John Crispin
2013-02-15 17:26     ` Gabor Juhos
2013-02-15 14:38 ` [PATCH 05/11] MIPS: ath79: add GPIO setup " Gabor Juhos
2013-02-15 14:38 ` [PATCH 06/11] MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set,clear} Gabor Juhos
2013-02-15 14:38 ` [PATCH 07/11] MIPS: ath79: register UART for the QCA955X SoCs Gabor Juhos
2013-02-15 14:38 ` [PATCH 08/11] MIPS: ath79: add WMAC registration code " Gabor Juhos
2013-02-15 16:01   ` John Crispin
2013-02-15 17:13     ` Gabor Juhos
2013-02-15 14:38 ` [PATCH 09/11] MIPS: ath79: add PCI controller " Gabor Juhos
2013-02-15 14:38 ` [PATCH 10/11] MIPS: ath79: add USB " Gabor Juhos
2013-02-15 14:38 ` [PATCH 11/11] MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board Gabor Juhos
2013-02-15 16:02   ` John Crispin
2013-02-15 17:34     ` Gabor Juhos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1360939105-23591-5-git-send-email-juhosg@openwrt.org \
    --to=juhosg@openwrt.org \
    --cc=blogic@openwrt.org \
    --cc=kgiori@qca.qualcomm.com \
    --cc=linux-mips@linux-mips.org \
    --cc=qca-linux-team@qca.qualcomm.com \
    --cc=ralf@linux-mips.org \
    --cc=rodrigue@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.