From: Matt Porter <mporter@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 9/9] ti814x_evm: add ti814x evm board support
Date: Fri, 15 Mar 2013 16:07:10 -0400 [thread overview]
Message-ID: <1363378030-2054-10-git-send-email-mporter@ti.com> (raw)
In-Reply-To: <1363378030-2054-1-git-send-email-mporter@ti.com>
Add TI814X EVM board directory, config file, and MAINTAINERS
entry. Enable build.
Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
---
v4: * Removed unused include
* Removed CONFIG_FS_* options to use fallbacks
v3: no change
v2:
* squash MAINTAINERS and Makefile commits here
* config file fixes (copyright, mtest, findfdt, fs options, cleanups)
* move wdtimer variable under SPL build
---
MAINTAINERS | 4 +
Makefile | 2 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
board/ti/ti814x/Makefile | 46 +++++++
board/ti/ti814x/evm.c | 198 ++++++++++++++++++++++++++++
board/ti/ti814x/evm.h | 7 +
board/ti/ti814x/mux.c | 51 +++++++
boards.cfg | 1 +
include/configs/ti814x_evm.h | 220 +++++++++++++++++++++++++++++++
spl/Makefile | 2 +-
11 files changed, 531 insertions(+), 4 deletions(-)
create mode 100644 board/ti/ti814x/Makefile
create mode 100644 board/ti/ti814x/evm.c
create mode 100644 board/ti/ti814x/evm.h
create mode 100644 board/ti/ti814x/mux.c
create mode 100644 include/configs/ti814x_evm.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6b1f657..3a59c6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -832,6 +832,10 @@ Stelian Pop <stelian@popies.net>
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+Matt Porter <mporter@ti.com>
+
+ ti814x_evm ARM ARMV7 (TI814x Soc)
+
Dave Purdy <david.c.purdy@gmail.com>
pogo_e02 ARM926EJS (Kirkwood SoC)
diff --git a/Makefile b/Makefile
index 55bd55c..4e3e242 100644
--- a/Makefile
+++ b/Makefile
@@ -331,7 +331,7 @@ LIBS-y += api/libapi.o
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ee8c2b3..c961247 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@ COBJS += cache_v7.o
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_TI814X),)
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 0efc80d..55e82ba 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -36,7 +36,7 @@ COBJS += emif-common.o
COBJS += vc.o
endif
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
COBJS += boot-common.o
SOBJS += lowlevel_init.o
endif
diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile
new file mode 100644
index 0000000..09d2422
--- /dev/null
+++ b/board/ti/ti814x/Makefile
@@ -0,0 +1,46 @@
+#
+# Makefile
+#
+# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+ifdef CONFIG_SPL_BUILD
+COBJS := mux.o
+endif
+
+COBJS += evm.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
new file mode 100644
index 0000000..acc18fb
--- /dev/null
+++ b/board/ti/ti814x/evm.c
@@ -0,0 +1,198 @@
+/*
+ * evm.c
+ *
+ * Board functions for TI814x EVM
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include "evm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static void uart_enable(void)
+{
+ u32 regVal;
+
+ /* UART softreset */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_RESET;
+ writel(regVal, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_SMART_IDLE_EN;
+ writel(regVal, &uart_base->uartsyscfg);
+}
+
+static void wdt_disable(void)
+{
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+}
+
+static const struct cmd_control evm_ddr2_cctrl_data = {
+ .cmd0csratio = 0x80,
+ .cmd0dldiff = 0x04,
+ .cmd0iclkout = 0x00,
+
+ .cmd1csratio = 0x80,
+ .cmd1dldiff = 0x04,
+ .cmd1iclkout = 0x00,
+
+ .cmd2csratio = 0x80,
+ .cmd2dldiff = 0x04,
+ .cmd2iclkout = 0x00,
+};
+
+static const struct emif_regs evm_ddr2_emif0_regs = {
+ .sdram_config = 0x40801ab2,
+ .ref_ctrl = 0x10000c30,
+ .sdram_tim1 = 0x0aaaf552,
+ .sdram_tim2 = 0x043631d2,
+ .sdram_tim3 = 0x00000327,
+ .emif_ddr_phy_ctlr_1 = 0x00000007
+};
+
+static const struct emif_regs evm_ddr2_emif1_regs = {
+ .sdram_config = 0x40801ab2,
+ .ref_ctrl = 0x10000c30,
+ .sdram_tim1 = 0x0aaaf552,
+ .sdram_tim2 = 0x043631d2,
+ .sdram_tim3 = 0x00000327,
+ .emif_ddr_phy_ctlr_1 = 0x00000007
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+ .dmm_lisa_map_0 = 0x00000000,
+ .dmm_lisa_map_1 = 0x00000000,
+ .dmm_lisa_map_2 = 0x806c0300,
+ .dmm_lisa_map_3 = 0x806c0300,
+};
+
+static const struct ddr_data evm_ddr2_data = {
+ .datardsratio0 = ((0x35<<10) | (0x35<<0)),
+ .datawdsratio0 = ((0x20<<10) | (0x20<<0)),
+ .datawiratio0 = ((0<<10) | (0<<0)),
+ .datagiratio0 = ((0<<10) | (0<<0)),
+ .datafwsratio0 = ((0x90<<10) | (0x90<<0)),
+ .datawrsratio0 = ((0x50<<10) | (0x50<<0)),
+ .datauserank0delay = 1,
+ .datadldiff0 = 0x4,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ wdt_disable();
+
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* Set UART pins */
+ enable_uart0_pin_mux();
+
+ /* Set MMC pins */
+ enable_mmc1_pin_mux();
+
+ /* Enable UART */
+ uart_enable();
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ config_dmm(&evm_lisa_map_regs);
+
+ config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+ &evm_ddr2_emif0_regs, 0);
+ config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+ &evm_ddr2_emif1_regs, 1);
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ return 0;
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(1, 0, 0);
+
+ return 0;
+}
+#endif
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h
new file mode 100644
index 0000000..40f8710
--- /dev/null
+++ b/board/ti/ti814x/evm.h
@@ -0,0 +1,7 @@
+#ifndef _EVM_H
+#define _EVM_H
+
+void enable_uart0_pin_mux(void);
+void enable_mmc1_pin_mux(void);
+
+#endif /* _EVM_H */
diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c
new file mode 100644
index 0000000..137acb4
--- /dev/null
+++ b/board/ti/ti814x/mux.c
@@ -0,0 +1,51 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "evm.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
+ {OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
+ {OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
+ {OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
+ {OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
+ {OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
+ {OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
+ {OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
+ {OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
+ {OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_mmc1_pin_mux(void)
+{
+ configure_module_pin_mux(mmc1_pin_mux);
+}
diff --git a/boards.cfg b/boards.cfg
index 2b408f5..68b0ef7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -238,6 +238,7 @@ am335x_evm_uart2 arm armv7 am335x ti
am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
+ti814x_evm arm armv7 ti814x ti am33xx
pcm051 arm armv7 pcm051 phytec am33xx pcm051
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
new file mode 100644
index 0000000..4cbd789
--- /dev/null
+++ b/include/configs/ti814x_evm.h
@@ -0,0 +1,220 @@
+/*
+ * ti814x_evm.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_TI814X_EVM_H
+#define __CONFIG_TI814X_EVM_H
+
+#define CONFIG_TI81XX
+#define CONFIG_TI814X
+#define CONFIG_SYS_NO_FLASH
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
+
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* Use HUSH for command parsing */
+#define CONFIG_SYS_PROMPT "U-Boot# "
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG /* for ramdisk support */
+
+/* commands to include */
+# include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80200000\0" \
+ "fdtaddr=0x80F80000\0" \
+ "rdaddr=0x81000000\0" \
+ "bootfile=/boot/uImage\0" \
+ "fdtfile=\0" \
+ "console=ttyO0,115200n8\0" \
+ "optargs=\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 ro\0" \
+ "mmcrootfstype=ext4 rootwait\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+ "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
+ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "ramboot=echo Booting from ramdisk ...; " \
+ "run ramargs; " \
+ "bootm ${loadaddr}\0" \
+ "fdtfile=ti814x-evm.dtb\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loaduimage; then " \
+ "run mmcboot;" \
+ "fi;" \
+ "fi;" \
+
+/* Clock Defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_CMD_ECHO
+
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ + PHYS_DRAM_1_SIZE - (8 << 12))
+
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
+
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+/**
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */
+#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
+#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */
+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+
+/**
+ * Platform/Board specific defs
+ */
+#define CONFIG_SYS_TIMERBASE 0x4802E000
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (48000000)
+#define CONFIG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80800000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+/*
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif /* ! __CONFIG_TI814X_EVM_H */
diff --git a/spl/Makefile b/spl/Makefile
index 101d478..c398a5f 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -82,7 +82,7 @@ LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
--
1.7.9.5
next prev parent reply other threads:[~2013-03-15 20:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 20:07 [U-Boot] [PATCH v4 0/9] Add TI814x EVM Support Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 1/9] am33xx: convert defines from am33xx-specific to generic names Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 2/9] am33xx: refactor emif4/ddr to support multiple EMIF instances Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 3/9] am33xx: refactor am33xx clocks and add ti814x support Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 4/9] am33xx: refactor am33xx mux support " Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 5/9] am33xx: add ti814x specific register definitions Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 6/9] am33xx: add dmm support to emif4 library Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 7/9] am33xx: support ti814x mmc reference clock Matt Porter
2013-03-15 20:07 ` [U-Boot] [PATCH v4 8/9] ns16550: enable quirks for ti814x Matt Porter
2013-03-15 20:07 ` Matt Porter [this message]
2013-03-26 14:50 ` [U-Boot] [PATCH v4 0/9] Add TI814x EVM Support Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363378030-2054-10-git-send-email-mporter@ti.com \
--to=mporter@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.