From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Date: Fri, 15 Mar 2013 16:07:06 -0400 Subject: [U-Boot] [PATCH v4 5/9] am33xx: add ti814x specific register definitions In-Reply-To: <1363378030-2054-1-git-send-email-mporter@ti.com> References: <1363378030-2054-1-git-send-email-mporter@ti.com> Message-ID: <1363378030-2054-6-git-send-email-mporter@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Support the ti814x specific register definitions within arch-am33xx. Signed-off-by: Matt Porter Reviewed-by: Tom Rini --- v4: Removed from omap.h v3: no changes v2: Update for hardware.h split --- arch/arm/cpu/armv7/am33xx/sys_info.c | 3 +++ arch/arm/include/asm/arch-am33xx/cpu.h | 11 +++++---- arch/arm/include/asm/arch-am33xx/hardware.h | 21 ++++------------- arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 24 ++++++++++++++++++++ arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 23 +++++++++++++++++++ arch/arm/include/asm/arch-am33xx/omap.h | 5 ++++ arch/arm/include/asm/arch-am33xx/spl.h | 5 ++++ 7 files changed, 71 insertions(+), 21 deletions(-) diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 507b618..402127c 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -98,6 +98,9 @@ int print_cpuinfo(void) case AM335X: cpu_s = "AM335X"; break; + case TI81XX: + cpu_s = "TI81XX"; + break; default: cpu_s = "Unknown cpu type"; break; diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 16e8a80..3d3a7c8 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -42,9 +42,10 @@ #define HS_DEVICE 0x2 #define GP_DEVICE 0x3 -/* cpu-id for AM33XX family */ +/* cpu-id for AM33XX and TI81XX family */ #define AM335X 0xB944 -#define DEVICE_ID 0x44E10600 +#define TI81XX 0xB81E +#define DEVICE_ID (CTRL_BASE + 0x0600) /* This gives the status of the boot mode pins on the evm */ #define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\ @@ -52,9 +53,11 @@ /* Reset control */ #ifdef CONFIG_AM33XX -#define PRM_RSTCTRL 0x44E00F00 -#define PRM_RSTST 0x44E00F08 +#define PRM_RSTCTRL (PRCM_BASE + 0x0F00) +#elif defined(CONFIG_TI814X) +#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) #endif +#define PRM_RSTST (PRM_RSTCTRL + 8) #define PRM_RSTCTRL_RESET 0x01 #define PRM_RSTST_WARM_RESET_MASK 0x232 diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 24a9b8d..5a27f9c 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -19,6 +19,7 @@ #ifndef __AM33XX_HARDWARE_H #define __AM33XX_HARDWARE_H +#include #include #ifdef CONFIG_AM33XX #include @@ -26,8 +27,9 @@ #include #endif -/* Module base addresses */ -#define UART0_BASE 0x44E09000 +/* + * Common hardware definitions + */ /* DM Timer base addresses */ #define DM_TIMER0_BASE 0x4802C000 @@ -42,21 +44,10 @@ /* GPIO Base address */ #define GPIO0_BASE 0x48032000 #define GPIO1_BASE 0x4804C000 -#define GPIO2_BASE 0x481AC000 /* BCH Error Location Module */ #define ELM_BASE 0x48080000 -/* Watchdog Timer */ -#define WDT_BASE 0x44E35000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x44E10000 -#define CTRL_DEVICE_BASE 0x44E10600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x44E00000 - /* EMIF Base address */ #define EMIF4_0_CFG_BASE 0x4C000000 #define EMIF4_1_CFG_BASE 0x4D000000 @@ -90,10 +81,6 @@ /* CPSW Config space */ #define CPSW_BASE 0x4A100000 -#define CPSW_MDIO_BASE 0x4A101000 - -/* RTC base address */ -#define RTC_BASE 0x44E3E000 /* OTG */ #define USB0_OTG_BASE 0x47401000 diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h index 7a4070c..fa02f19 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -19,6 +19,24 @@ #ifndef __AM33XX_HARDWARE_AM33XX_H #define __AM33XX_HARDWARE_AM33XX_H +/* Module base addresses */ + +/* UART Base Address */ +#define UART0_BASE 0x44E09000 + +/* GPIO Base address */ +#define GPIO2_BASE 0x481AC000 + +/* Watchdog Timer */ +#define WDT_BASE 0x44E35000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x44E10000 +#define CTRL_DEVICE_BASE 0x44E10600 + +/* PRCM Base Address */ +#define PRCM_BASE 0x44E00000 + /* VTP Base address */ #define VTP0_CTRL_ADDR 0x44E10E0C @@ -27,4 +45,10 @@ #define DDR_PHY_DATA_ADDR 0x44E120C8 #define DDR_DATA_REGS_NR 2 +/* CPSW Config space */ +#define CPSW_MDIO_BASE 0x4A101000 + +/* RTC base address */ +#define RTC_BASE 0x44E3E000 + #endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h index af7d1d8..a950ac3 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h @@ -19,6 +19,23 @@ #ifndef __AM33XX_HARDWARE_TI814X_H #define __AM33XX_HARDWARE_TI814X_H +/* Module base addresses */ + +/* UART Base Address */ +#define UART0_BASE 0x48020000 + +/* Watchdog Timer */ +#define WDT_BASE 0x481C7000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x48140000 + +/* PRCM Base Address */ +#define PRCM_BASE 0x48180000 + +/* PLL Subsystem Base Address */ +#define PLL_SUBSYS_BASE 0x481C5000 + /* VTP Base address */ #define VTP0_CTRL_ADDR 0x48140E0C @@ -27,4 +44,10 @@ #define DDR_PHY_DATA_ADDR 0x47C0C4C8 #define DDR_DATA_REGS_NR 4 +/* CPSW Config space */ +#define CPSW_MDIO_BASE 0x4A100800 + +/* RTC base address */ +#define RTC_BASE 0x480C0000 + #endif /* __AM33XX_HARDWARE_TI814X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 850f8a5..d28f9a8 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -28,8 +28,13 @@ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE * at 0x40304000(EMU base) so that our code works for both EMU and GP */ +#ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 +#elif defined(CONFIG_TI814X) +#define NON_SECURE_SRAM_START 0x40300000 +#define NON_SECURE_SRAM_END 0x40320000 +#endif /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 644ff35..9b5fe9e 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -25,8 +25,13 @@ #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 +#ifdef CONFIG_AM33XX #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ +#elif defined(CONFIG_TI814X) +#define BOOT_DEVICE_MMC1 9 +#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */ +#endif #define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_CPGMAC 70 -- 1.7.9.5