From: chao.xie@marvell.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [V9 PATCH 00/12] mv-usb phy driver
Date: Sun, 7 Apr 2013 06:29:34 -0400 [thread overview]
Message-ID: <1365330586-649-1-git-send-email-chao.xie@marvell.com> (raw)
The patches create the mv-usb phy driver
The patches remove the callbacks in the platform data for phy
initialization and shutdown, and directly write a phy driver
and make udc/ehci/otg to call it.
usb: phy: protect phy init and shutdown for mutiple deivces
usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
Above patches are marvell usb PHY driver support.
usb: gadget: mv_udc: use PHY driver for udc
usb: ehci: ehci-mv: use PHY driver for ehci
usb: phy: phy-mv-usb: use USB2 PHY driver for otg
Above patches modify the udc/ehci/otg drivers to make use of PHY
driver.
usb: mv_u3d: usb phy drivers for phy operation
Above patch is the fix for marvel usb3 gadget driver. It will make
use of PHY driver.
arm: mmp2: change the defintion of usb devices
arm: pxa910: change the defintion of usb devices
arm: ttc_dkb: modify usb support
arm: mmp: remove unused usb devices
arm: brownstone: add usb support for the board
Above patches are the changes from SOCes.
usb: mv_usb: remove the phy callbacks in pdata
Above patch finally remove the callbacks for PHY in pdata.
V2->V1:
Change the Signed-off-by to be right email address
v3->v2
re-format the patches to new code base
v4->v3
1. make mv udc gadget driver depend on ARCH_PXA and ARCH_MMP
2. remove __devinit and __devexit
3. make the driver compiled successful if CONFIG_MV_USB2_PHY is not defined.
The modified patches are
usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA
usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
v5->v4
make the struct mv_usb2_extern_chip member ->head to be
struct atomic_notifier_head instead of struct atomic_notifier_head *.
v6->v5
the bug fix patches are merged.
Removed the dependcy of ARCH_MMP and ARCH_PXA, and make the driver can be
compiled for x86.
The device tree support patches need modification, remove them from this
patch series, and they will be submitted in another series.
v7->v6
Use usb_add_phy_dev and related APIs to add PHY drivers.
Removed the device tree support in PHY driver. It will be added in another
patch series.
v8->v7
bugs fix in phy driver.
directly use devm_usb_get_phy_dev return value for error return.
v9->v8
Remove u2o_xxx.
Add prefix for register definition
Move mutex to common PHY layer
Use module_platform_driver() to register driver
Use usleep_range to replace udelay
Chao Xie (12):
usb: phy: protect phy init and shutdown for mutiple deivces
usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
usb: gadget: mv_udc: use PHY driver for udc
usb: ehci: ehci-mv: use PHY driver for ehci
usb: phy: phy-mv-usb: use USB2 PHY driver for otg
usb: mv_u3d: usb phy drivers for phy operation
arm: mmp2: change the defintion of usb devices
arm: pxa910: change the defintion of usb devices
arm: ttc_dkb: modify usb support
arm: mmp: remove unused usb devices
arm: brownstone: add usb support for the board
usb: mv_usb: remove the phy callbacks in pdata
arch/arm/mach-mmp/brownstone.c | 56 +++++
arch/arm/mach-mmp/include/mach/mmp2.h | 4 +
arch/arm/mach-mmp/include/mach/pxa910.h | 7 +-
arch/arm/mach-mmp/mmp2.c | 4 +
arch/arm/mach-mmp/pxa910.c | 4 +
arch/arm/mach-mmp/ttc_dkb.c | 39 +++-
drivers/usb/gadget/mv_u3d.h | 3 +-
drivers/usb/gadget/mv_u3d_core.c | 54 ++---
drivers/usb/gadget/mv_udc.h | 2 +-
drivers/usb/gadget/mv_udc_core.c | 50 ++---
drivers/usb/host/ehci-mv.c | 49 ++---
drivers/usb/phy/Kconfig | 6 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-mv-usb.c | 53 ++---
drivers/usb/phy/phy-mv-usb.h | 2 +-
drivers/usb/phy/phy-mv-usb2.c | 380 +++++++++++++++++++++++++++++++
drivers/usb/phy/phy.c | 6 +
include/linux/platform_data/mv_usb.h | 3 -
include/linux/usb/mv_usb2.h | 29 +++
include/linux/usb/phy.h | 22 ++-
20 files changed, 624 insertions(+), 150 deletions(-)
create mode 100644 drivers/usb/phy/phy-mv-usb2.c
create mode 100644 include/linux/usb/mv_usb2.h
--
1.7.4.1
next reply other threads:[~2013-04-07 10:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-07 10:29 Chao Xie [this message]
2013-04-07 10:29 ` [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces Chao Xie
2013-04-07 10:29 ` [V9 PATCH 02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2013-04-07 10:29 ` [V9 PATCH 03/12] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2013-04-07 10:29 ` [V9 PATCH 04/12] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2013-04-07 10:29 ` [V9 PATCH 05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg Chao Xie
2013-04-07 10:29 ` [V9 PATCH 06/12] usb: mv_u3d: usb phy drivers for phy operation Chao Xie
2013-04-07 10:29 ` [V9 PATCH 07/12] arm: mmp2: change the defintion of usb devices Chao Xie
2013-04-07 10:29 ` [V9 PATCH 08/12] arm: pxa910: " Chao Xie
2013-04-07 10:29 ` [V9 PATCH 09/12] arm: ttc_dkb: modify usb support Chao Xie
2013-04-07 10:29 ` [V9 PATCH 10/12] arm: mmp: remove unused usb devices Chao Xie
2013-04-07 10:29 ` [V9 PATCH 11/12] arm: brownstone: add usb support for the board Chao Xie
2013-04-07 10:29 ` [V9 PATCH 12/12] usb: mv_usb: remove the phy callbacks in pdata Chao Xie
[not found] ` <CADApbeg4BSUubbTw8tC-fuQ06JrRtAW9+rOdg=3rP_0Dr=LwkQ@mail.gmail.com>
2013-04-17 1:22 ` [V9 PATCH 00/12] mv-usb phy driver Chao Xie
2013-05-15 14:35 ` Felipe Balbi
2013-04-24 6:23 Chao Xie
2013-05-13 5:51 Chao Xie
2013-05-13 5:51 Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365330586-649-1-git-send-email-chao.xie@marvell.com \
--to=chao.xie@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.