From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Williams Subject: [PATCH 2/2 v4] sierra_net: keep status interrupt URB active Date: Tue, 09 Apr 2013 18:05:51 -0500 Message-ID: <1365548751.23372.6.camel@dcbw.foobar.com> References: <20110727141246.GC29616@orbit.nwl.cc> <1357318096.5370.15.camel@dcbw.foobar.com> <1364488207.1877.20.camel@dcbw.foobar.com> <1364832288.3059.12.camel@dcbw.foobar.com> <1365548547.23372.2.camel@dcbw.foobar.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Cc: Oliver Neukum , Elina Pasheva , Network Development , linux-usb , Rory Filer , Phil Sutter To: Ming Lei Return-path: Received: from mx1.redhat.com ([209.132.183.28]:34453 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751767Ab3DIXEq (ORCPT ); Tue, 9 Apr 2013 19:04:46 -0400 In-Reply-To: <1365548547.23372.2.camel@dcbw.foobar.com> Sender: netdev-owner@vger.kernel.org List-ID: The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion. Signed-off-by: Dan Williams --- drivers/net/usb/sierra_net.c | 40 ++++++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 8 deletions(-) diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index 79ab243..c707225 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -44,7 +44,7 @@ static const char driver_name[] = "sierra_net"; #include #include #include -#include +#include "usbnet.h" #define SWI_USB_REQUEST_GET_FW_ATTR 0x06 #define SWI_GET_FW_ATTR_MASK 0x08 @@ -427,6 +427,13 @@ static void sierra_net_dosync(struct usbnet *dev) dev_dbg(&dev->udev->dev, "%s", __func__); + /* The SIERRA_NET_HIP_MSYNC_ID command appears to request that the + * firmware restart itself. After restarting, the modem will respond + * with the SIERRA_NET_HIP_RESTART_ID indication. The driver continues + * sending MSYNC commands every few seconds until it receives the + * RESTART event from the firmware + */ + /* tell modem we are ready */ status = sierra_net_send_sync(dev); if (status < 0) @@ -705,6 +712,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) /* set context index initially to 0 - prepares tx hdr template */ sierra_net_set_ctx_index(priv, 0); + /* prepare sync message template */ + memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); + /* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */ dev->rx_urb_size = SIERRA_NET_RX_URB_SIZE; if (dev->udev->speed != USB_SPEED_HIGH) @@ -740,11 +750,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) kfree(priv); return -ENODEV; } - /* prepare sync message from template */ - memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); - - /* initiate the sync sequence */ - sierra_net_dosync(dev); return 0; } @@ -767,8 +772,9 @@ static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf) netdev_err(dev->net, "usb_control_msg failed, status %d\n", status); - sierra_net_set_private(dev, NULL); + usbnet_status_stop(dev); + sierra_net_set_private(dev, NULL); kfree(priv); } @@ -909,6 +915,24 @@ static const struct driver_info sierra_net_info_direct_ip = { .tx_fixup = sierra_net_tx_fixup, }; +static int +sierra_net_probe(struct usb_interface *udev, const struct usb_device_id *prod) +{ + int ret; + + ret = usbnet_probe(udev, prod); + if (ret == 0) { + struct usbnet *dev = usb_get_intfdata(udev); + + ret = usbnet_status_start(dev, GFP_KERNEL); + if (ret == 0) { + /* Interrupt URB now set up; initiate sync sequence */ + sierra_net_dosync(dev); + } + } + return ret; +} + #define DIRECT_IP_DEVICE(vend, prod) \ {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \ .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ @@ -931,7 +955,7 @@ MODULE_DEVICE_TABLE(usb, products); static struct usb_driver sierra_net_driver = { .name = "sierra_net", .id_table = products, - .probe = usbnet_probe, + .probe = sierra_net_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, -- 1.8.1.4