From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755279Ab3DTNQR (ORCPT ); Sat, 20 Apr 2013 09:16:17 -0400 Received: from mail.df.lth.se ([194.47.250.12]:56973 "EHLO mail.df.lth.se" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755180Ab3DTNP3 (ORCPT ); Sat, 20 Apr 2013 09:15:29 -0400 From: Linus Walleij To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, Linus Walleij Subject: [PATCH 3/4] ARM: nomadik: convert all clocks except timer to dt Date: Sat, 20 Apr 2013 15:08:38 +0200 Message-Id: <1366463318-9992-1-git-send-email-linus.walleij@linaro.org> X-Mailer: git-send-email 1.7.2.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This moves all Nomadik clocks except the one used for the timer/clocksource over to the device tree. Signed-off-by: Linus Walleij --- .../devicetree/bindings/arm/ste-nomadik.txt | 5 ++ arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 54 ++++++++++++++++++++++ arch/arm/mach-nomadik/cpu-8815.c | 20 +------- drivers/clk/clk-nomadik.c | 26 +++-------- 4 files changed, 68 insertions(+), 37 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt index 19bca04..6256ec3 100644 --- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt +++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt @@ -3,6 +3,11 @@ ST-Ericsson Nomadik Device Tree Bindings For various board the "board" node may contain specific properties that pertain to this particular board, such as board-specific GPIOs. +Required root node property: src +- Nomadik System and reset controller used for basic chip control, clock + and reset line control. +- compatible: must be "stericsson,nomadik,src" + Boards with the Nomadik SoC include: S8815 "MiniKit" manufactured by Calao Systems: diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 4a4aab3..f0df948 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -45,6 +45,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + clocks = <&pclk>; }; gpio1: gpio@101e5000 { @@ -57,6 +58,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + clocks = <&pclk>; }; gpio2: gpio@101e6000 { @@ -69,6 +71,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + clocks = <&pclk>; }; gpio3: gpio@101e7000 { @@ -81,12 +84,50 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + clocks = <&pclk>; }; pinctrl { compatible = "stericsson,nmk-pinctrl-stn8815"; }; + src: src@101e0000 { + compatible = "stericsson,nomadik-src"; + reg = <0x101e0000 0x1000>; + clocks { + /* + * Dummy clock for primecells + */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <2400000>; + }; + /* + * The 2.4 MHz TIMCLK reference clock is active at + * boot time, this is actually the MXTALCLK @19.2 MHz + * divided by 8. This clock is used by the timers and + * watchdog. See page 105 ff. + */ + timclk: timclk@2.4M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <2400000>; + }; + /* + * At boot time, PLL2 is set to generate a set of + * fixed clocks, one of them is CLK48, the 48 MHz + * clock, routed to the UART, MMC/SD, I2C, IrDA, + * USB and SSP blocks. + */ + clk48: clk48@48M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; + }; + }; + /* A NAND flash of 128 MiB */ fsmc: flash@40000000 { compatible = "stericsson,fsmc-nand"; @@ -97,6 +138,7 @@ <0x41000000 0x2000>, /* NAND Base ADDR */ <0x40800000 0x2000>; /* NAND Base CMD */ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + clocks = <&pclk>; status = "okay"; partition@0 { @@ -211,6 +253,8 @@ reg = <0x101fd000 0x1000>; interrupt-parent = <&vica>; interrupts = <12>; + clocks = <&clk48>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@101fb000 { @@ -218,6 +262,8 @@ reg = <0x101fb000 0x1000>; interrupt-parent = <&vica>; interrupts = <17>; + clocks = <&clk48>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart2: uart@101f2000 { @@ -225,17 +271,23 @@ reg = <0x101f2000 0x1000>; interrupt-parent = <&vica>; interrupts = <28>; + clocks = <&clk48>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; rng: rng@101b0000 { compatible = "arm,primecell"; reg = <0x101b0000 0x1000>; + clocks = <&clk48>, <&pclk>; + clock-names = "rng", "apb_pclk"; }; rtc: rtc@101e8000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x101e8000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; interrupt-parent = <&vica>; interrupts = <10>; }; @@ -243,6 +295,8 @@ mmcsd: sdi@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; + clocks = <&clk48>, <&pclk>; + clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; max-frequency = <48000000>; diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 59f6ff5..0e2c5e0 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -280,28 +280,12 @@ device_initcall(cpu8815_mmcsd_init); /* These are mostly to get the right device names for the clock lookups */ static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, - "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, - "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, - "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, - "gpio.3", NULL), OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, "pinctrl-stn8815", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, - "uart0", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, - "uart1", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, - "rng", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, - "rtc-pl031", NULL), OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, - "fsmc-nand", &cpu8815_nand_data), + NULL, &cpu8815_nand_data), OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, - "mmci", &mmcsd_plat_data), + NULL, &mmcsd_plat_data), { /* sentinel */ }, }; diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 6b4c70f..19f197c 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -3,24 +3,24 @@ #include #include #include +#include /* * The Nomadik clock tree is described in the STN8815A12 DB V4.2 * reference manual for the chip, page 94 ff. */ +static const __initconst struct of_device_id cpu8815_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { /* sentinel */ } +}; + void __init nomadik_clk_init(void) { struct clk *clk; clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); clk_register_clkdev(clk, "apb_pclk", NULL); - clk_register_clkdev(clk, NULL, "gpio.0"); - clk_register_clkdev(clk, NULL, "gpio.1"); - clk_register_clkdev(clk, NULL, "gpio.2"); - clk_register_clkdev(clk, NULL, "gpio.3"); - clk_register_clkdev(clk, NULL, "rng"); - clk_register_clkdev(clk, NULL, "fsmc-nand"); /* * The 2.4 MHz TIMCLK reference clock is active at boot time, this is @@ -32,17 +32,5 @@ void __init nomadik_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - /* - * At boot time, PLL2 is set to generate a set of fixed clocks, - * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD - * I2C, IrDA, USB and SSP blocks. - */ - clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT, - 48000000); - clk_register_clkdev(clk, NULL, "uart0"); - clk_register_clkdev(clk, NULL, "uart1"); - clk_register_clkdev(clk, NULL, "mmci"); - clk_register_clkdev(clk, NULL, "ssp"); - clk_register_clkdev(clk, NULL, "nmk-i2c.0"); - clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + of_clk_init(cpu8815_clk_match); } -- 1.8.1.4