From: a@pandem0nium
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes@sipsolutions.net>,
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>,
Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Subject: [PATCH 6/8] ath9k: convert to chandef, enable support for 5/10 MHz channels
Date: Thu, 9 May 2013 20:10:34 +0200 [thread overview]
Message-ID: <1368123036-22721-7-git-send-email-a> (raw)
In-Reply-To: <1368123036-22721-1-git-send-email-a>
From: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
To enable support for 5/10 MHz, also some internal functions must be
converted from using the (old) channel_type to chandef. This is a good
chance to change all remaining occurences.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath9k/common.c | 67 +++++++++++++++----------
drivers/net/wireless/ath/ath9k/common.h | 3 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 +-
drivers/net/wireless/ath/ath9k/init.c | 4 +-
drivers/net/wireless/ath/ath9k/main.c | 8 ++-
drivers/net/wireless/ath/ath9k/rc.c | 4 +-
6 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 344fdde..d3063c2 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -49,37 +49,40 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
}
EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype);
-static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+static u32 ath9k_get_extchanmode(struct cfg80211_chan_def *chandef)
{
u32 chanmode = 0;
- switch (chan->band) {
+ switch (chandef->chan->band) {
case IEEE80211_BAND_2GHZ:
- switch (channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
chanmode = CHANNEL_G_HT20;
break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_G_HT40PLUS;
+ case NL80211_CHAN_WIDTH_40:
+ if (chandef->center_freq1 > chandef->chan->center_freq)
+ chanmode = CHANNEL_G_HT40PLUS;
+ else
+ chanmode = CHANNEL_G_HT40MINUS;
break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_G_HT40MINUS;
+ default:
break;
}
break;
case IEEE80211_BAND_5GHZ:
- switch (channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
chanmode = CHANNEL_A_HT20;
break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_A_HT40PLUS;
+ case NL80211_CHAN_WIDTH_40:
+ if (chandef->center_freq1 > chandef->chan->center_freq)
+ chanmode = CHANNEL_A_HT40PLUS;
+ else
+ chanmode = CHANNEL_A_HT40MINUS;
break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_A_HT40MINUS;
+ default:
break;
}
break;
@@ -94,13 +97,12 @@ static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan,
* Update internal channel flags.
*/
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+ struct cfg80211_chan_def *chandef)
{
- ichan->channel = chan->center_freq;
- ichan->chan = chan;
+ ichan->channel = chandef->chan->center_freq;
+ ichan->chan = chandef->chan;
- if (chan->band == IEEE80211_BAND_2GHZ) {
+ if (chandef->chan->band == IEEE80211_BAND_2GHZ) {
ichan->chanmode = CHANNEL_G;
ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
} else {
@@ -108,8 +110,22 @@ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
}
- if (channel_type != NL80211_CHAN_NO_HT)
- ichan->chanmode = ath9k_get_extchanmode(chan, channel_type);
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ ichan->channelFlags |= CHANNEL_QUARTER;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ ichan->channelFlags |= CHANNEL_HALF;
+ break;
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ ichan->chanmode = ath9k_get_extchanmode(chandef);
+ break;
+ default:
+ WARN_ON(1);
+ }
}
EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
@@ -125,8 +141,7 @@ struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
chan_idx = curchan->hw_value;
channel = &ah->channels[chan_idx];
- ath9k_cmn_update_ichannel(channel, curchan,
- cfg80211_get_chandef_type(&hw->conf.chandef));
+ ath9k_cmn_update_ichannel(channel, &hw->conf.chandef);
return channel;
}
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 207d069..e039bcb 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -44,8 +44,7 @@
int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type);
+ struct cfg80211_chan_def *chandef);
struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
struct ath_hw *ah);
int ath9k_cmn_count_streams(unsigned int chainmask, int max);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0743a47..8c25c7a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1194,16 +1194,13 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) {
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- enum nl80211_channel_type channel_type =
- cfg80211_get_chandef_type(&hw->conf.chandef);
int pos = curchan->hw_value;
ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
curchan->center_freq);
ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
- hw->conf.chandef.chan,
- channel_type);
+ &hw->conf.chandef);
if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 3be2eb0..0959729 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -684,13 +684,15 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
struct ath_hw *ah = sc->sc_ah;
+ struct cfg80211_chan_def chandef;
int i;
sband = &sc->sbands[band];
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
ah->curchan = &ah->channels[chan->hw_value];
- ath9k_cmn_update_ichannel(ah->curchan, chan, NL80211_CHAN_HT20);
+ cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20);
+ ath9k_cmn_update_ichannel(ah->curchan, &chandef);
ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a383483..6804f4f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1189,8 +1189,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- enum nl80211_channel_type channel_type =
- cfg80211_get_chandef_type(&conf->chandef);
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
@@ -1198,8 +1196,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
- ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
- curchan->center_freq, channel_type);
+ ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
+ curchan->center_freq, hw->conf.chandef.width);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
@@ -1214,7 +1212,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
ath9k_hw_getnf(ah, ah->curchan);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
- curchan, channel_type);
+ &conf->chandef);
/*
* If the operating channel changes, change the survey in-use flags
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index aa4d368..ed57d57 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1327,8 +1327,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
ath_rc_init(sc, priv_sta);
ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG,
- "Operating HT Bandwidth changed to: %d\n",
- cfg80211_get_chandef_type(&sc->hw->conf.chandef));
+ "Operating Bandwidth changed to: %d\n",
+ &sc->hw->conf.chandef->width);
}
}
--
1.7.10.4
next prev parent reply other threads:[~2013-05-09 18:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-09 18:10 [PATCH 0/8] Add support for 5 and 10 MHz channels a
2013-05-09 18:10 ` [PATCH 1/8] nl80211/cfg80211: add 5 and 10 MHz defines and wiphy flag a
2013-05-09 18:10 ` [PATCH 2/8] mac80211: fix various components for the new 5 and 10 MHz widths a
2013-05-09 18:31 ` Felix Fietkau
2013-05-09 19:46 ` Simon Wunderlich
2013-05-09 20:32 ` Felix Fietkau
2013-05-09 18:10 ` [PATCH 3/8] mac80211: change IBSS channel state to chandef a
2013-05-09 18:10 ` [PATCH 4/8] mac80211: fix timing for 5 MHz and 10 MHz channels a
2013-05-09 18:10 ` [PATCH 5/8] nl80211: allow 5 and 10 MHz channels for IBSS a
2013-05-09 18:10 ` a [this message]
2013-05-09 18:10 ` [PATCH 7/8] ath9k: announce that ath9k supports 5/10 MHz a
2013-05-09 18:10 ` [PATCH 8/8] ath5k: enable support for 5 MHz and 10 MHz channels a
2013-05-09 18:20 ` [PATCH 0/8] Add support for 5 " Simon Wunderlich
2013-05-10 7:26 ` Johannes Berg
2013-05-10 9:12 ` Adrian Chadd
2013-05-10 9:32 ` Simon Wunderlich
2013-05-10 9:34 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368123036-22721-7-git-send-email-a \
--to=a@pandem0nium \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=mathias.kretschmer@fokus.fraunhofer.de \
--cc=siwu@hrz.tu-chemnitz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.