All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH v2] sh-pfc: r8a7779: Don't group USB OVC and PENC pins
Date: Wed, 15 May 2013 09:33:40 +0000	[thread overview]
Message-ID: <1368610420-3961-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The USB_OVCn pins are alternate options for USB over-current detection
when using a 3.3V USB interface. As they're not mandatory they can be
used independently of the USB PENC pins. Don't group the USB_OVCn and
PENC pins to avoid conflicts when the USB_OVCn pins are used by another
function.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 45 ++++++++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 9 deletions(-)

Simon, this should fix your pinctrl conflict issue for renesas-next-20130515v2
+ v3.10-rc1.

Changes since v1:

- Reworked the commit message
- Rename OVC to USB_OVC in the pin description comments

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
index 835611e..96bdf48 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
@@ -2424,27 +2424,48 @@ static const unsigned int sdhi3_wp_mux[] = {
 };
 /* - USB0 ------------------------------------------------------------------- */
 static const unsigned int usb0_pins[] = {
-	/* OVC */
-	RCAR_GP_PIN(4, 22), RCAR_GP_PIN(4, 26),
+	/* PENC */
+	RCAR_GP_PIN(4, 26),
 };
 static const unsigned int usb0_mux[] = {
-	USB_OVC0_MARK, USB_PENC0_MARK,
+	USB_PENC0_MARK,
+};
+static const unsigned int usb0_ovc_pins[] = {
+	/* USB_OVC */
+	RCAR_GP_PIN(4, 22),
+};
+static const unsigned int usb0_ovc_mux[] = {
+	USB_OVC0_MARK,
 };
 /* - USB1 ------------------------------------------------------------------- */
 static const unsigned int usb1_pins[] = {
-	/* OVC */
-	RCAR_GP_PIN(4, 24), RCAR_GP_PIN(4, 27),
+	/* PENC */
+	RCAR_GP_PIN(4, 27),
 };
 static const unsigned int usb1_mux[] = {
-	USB_OVC1_MARK, USB_PENC1_MARK,
+	USB_PENC1_MARK,
+};
+static const unsigned int usb1_ovc_pins[] = {
+	/* USB_OVC */
+	RCAR_GP_PIN(4, 24),
+};
+static const unsigned int usb1_ovc_mux[] = {
+	USB_OVC1_MARK,
 };
 /* - USB2 ------------------------------------------------------------------- */
 static const unsigned int usb2_pins[] = {
-	/* OVC, PENC */
-	RCAR_GP_PIN(3, 29), RCAR_GP_PIN(4, 28),
+	/* PENC */
+	RCAR_GP_PIN(4, 28),
 };
 static const unsigned int usb2_mux[] = {
-	USB_OVC2_MARK, USB_PENC2_MARK,
+	USB_PENC2_MARK,
+};
+static const unsigned int usb2_ovc_pins[] = {
+	/* USB_OVC */
+	RCAR_GP_PIN(3, 29),
+};
+static const unsigned int usb2_ovc_mux[] = {
+	USB_OVC2_MARK,
 };
 /* - VIN0 ------------------------------------------------------------------- */
 static const unsigned int vin0_data8_pins[] = {
@@ -2675,8 +2696,11 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(sdhi3_cd),
 	SH_PFC_PIN_GROUP(sdhi3_wp),
 	SH_PFC_PIN_GROUP(usb0),
+	SH_PFC_PIN_GROUP(usb0_ovc),
 	SH_PFC_PIN_GROUP(usb1),
+	SH_PFC_PIN_GROUP(usb1_ovc),
 	SH_PFC_PIN_GROUP(usb2),
+	SH_PFC_PIN_GROUP(usb2_ovc),
 	SH_PFC_PIN_GROUP(vin0_data8),
 	SH_PFC_PIN_GROUP(vin0_clk),
 	SH_PFC_PIN_GROUP(vin0_sync),
@@ -2875,14 +2899,17 @@ static const char * const sdhi3_groups[] = {
 
 static const char * const usb0_groups[] = {
 	"usb0",
+	"usb0_ovc",
 };
 
 static const char * const usb1_groups[] = {
 	"usb1",
+	"usb1_ovc",
 };
 
 static const char * const usb2_groups[] = {
 	"usb2",
+	"usb2_ovc",
 };
 
 static const char * const vin0_groups[] = {
-- 
Regards,

Laurent Pinchart


             reply	other threads:[~2013-05-15  9:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-15  9:33 Laurent Pinchart [this message]
2013-05-16  5:12 ` [PATCH v2] sh-pfc: r8a7779: Don't group USB OVC and PENC pins Simon Horman
2013-05-21  9:08 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1368610420-3961-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.