All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Cc: bpm@sgi.com
Subject: [PATCH 03/11] xfs: remote attribute read too short
Date: Tue, 21 May 2013 18:02:02 +1000	[thread overview]
Message-ID: <1369123330-9579-4-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1369123330-9579-1-git-send-email-david@fromorbit.com>

From: Dave Chinner <dchinner@redhat.com>

Reading a maximally size remote attribute fails when CRCs are
enabled with this verification error:

XFS (vdb): remote attribute header does not match required off/len/owner)

There are two reasons for this, the first being that the
length of the buffer being read is determined from the
args->rmtblkcnt which doesn't take into account CRC headers. Hence
the mapped length ends up being too short and so we need to
calculate it directly from the value length.

The second is that the byte count of valid data within a buffer is
capped by the length of the data and so doesn't take into account
that the buffer might be longer due to headers. Hence we need to
calculate the data space in the buffer first before calculating the
actual byte count of data.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 fs/xfs/xfs_attr_remote.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c
index aad95b0..bcdc07c 100644
--- a/fs/xfs/xfs_attr_remote.c
+++ b/fs/xfs/xfs_attr_remote.c
@@ -52,9 +52,11 @@ xfs_attr3_rmt_blocks(
 	struct xfs_mount *mp,
 	int		attrlen)
 {
-	int		buflen = XFS_ATTR3_RMT_BUF_SPACE(mp,
-							 mp->m_sb.sb_blocksize);
-	return (attrlen + buflen - 1) / buflen;
+	if (xfs_sb_version_hascrc(&mp->m_sb)) {
+		int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize);
+		return (attrlen + buflen - 1) / buflen;
+	}
+	return XFS_B_TO_FSB(mp, attrlen);
 }
 
 static bool
@@ -206,8 +208,9 @@ xfs_attr_rmtval_get(
 
 	while (valuelen > 0) {
 		nmap = ATTR_RMTVALUE_MAPSIZE;
+		blkcnt = xfs_attr3_rmt_blocks(mp, valuelen);
 		error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno,
-				       args->rmtblkcnt, map, &nmap,
+				       blkcnt, map, &nmap,
 				       XFS_BMAPI_ATTRFORK);
 		if (error)
 			return error;
@@ -227,8 +230,8 @@ xfs_attr_rmtval_get(
 			if (error)
 				return error;
 
-			byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length));
-			byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt);
+			byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length));
+			byte_cnt = min_t(int, valuelen, byte_cnt);
 
 			src = bp->b_addr;
 			if (xfs_sb_version_hascrc(&mp->m_sb)) {
-- 
1.7.10.4

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2013-05-21  8:02 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-21  8:01 [PATCH 00/11] xfs: fixes for 3.10-rc3 Dave Chinner
2013-05-21  8:02 ` [PATCH 01/11] xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Dave Chinner
2013-05-21 18:35   ` Ben Myers
2013-05-21  8:02 ` [PATCH 02/11] xfs: remote attribute allocation may be contiguous Dave Chinner
2013-05-21  8:02 ` Dave Chinner [this message]
2013-05-21 20:59   ` [PATCH 03/11] xfs: remote attribute read too short Ben Myers
2013-05-21 22:53     ` Dave Chinner
2013-05-21  8:02 ` [PATCH 04/11] xfs: remote attribute tail zeroing does too much Dave Chinner
2013-05-21 22:31   ` Ben Myers
2013-05-21 22:55     ` Dave Chinner
2013-05-21  8:02 ` [PATCH 05/11] xfs: correctly map remote attr buffers during removal Dave Chinner
2013-05-22 17:01   ` Ben Myers
2013-05-21  8:02 ` [PATCH 06/11] xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance Dave Chinner
2013-05-22 20:50   ` Ben Myers
2013-05-22 23:54     ` Dave Chinner
2013-05-23 22:51       ` Ben Myers
2013-05-21  8:02 ` [PATCH 07/11] xfs: fully initialise temp leaf in xfs_attr3_leaf_compact Dave Chinner
2013-05-22 21:59   ` Ben Myers
2013-05-22 23:58     ` Dave Chinner
2013-05-23 22:51       ` Ben Myers
2013-05-21  8:02 ` [PATCH 08/11] xfs: don't emit v5 superblock warnings on write Dave Chinner
2013-05-22 22:26   ` Ben Myers
2013-05-23  0:03     ` Dave Chinner
2013-05-23 15:23       ` Ben Myers
2013-05-23 23:13         ` Dave Chinner
2013-05-21  8:02 ` [PATCH 09/11] xfs: rework remote attr CRCs Dave Chinner
2013-05-23 21:54   ` Ben Myers
2013-05-23 23:35     ` Dave Chinner
2013-05-21  8:02 ` [PATCH 10/11] xfs: fix incorrect remote symlink block count Dave Chinner
2013-05-24 20:36   ` Ben Myers
2013-05-24 20:39     ` Ben Myers
2013-05-24 23:41       ` Dave Chinner
2013-05-25 15:16         ` Ben Myers
2013-05-21  8:02 ` [PATCH 11/11] xfs: increase number of ACL entries for V5 superblocks Dave Chinner
2013-05-21 14:00   ` Brian Foster
2013-05-21 20:27     ` Dave Chinner
2013-05-21 16:26 ` [PATCH 00/11] xfs: fixes for 3.10-rc3 Ben Myers
2013-05-21 20:24   ` Dave Chinner
2013-05-21 20:52     ` Ben Myers
2013-05-21 21:27       ` Dave Chinner
2013-05-23 12:30 ` [PATCH 0/2] xfs: more " Dave Chinner
2013-05-23 12:30   ` [PATCH 1/2] xfs: rework dquot CRCs Dave Chinner
2013-05-23 12:30   ` [PATCH 2/2] xfs: fix split buffer vector log recovery support Dave Chinner
2013-05-24  8:58   ` [patch 0/2] xfs: yet more fixes for 3.10-rc3 Dave Chinner
2013-05-24  8:58     ` [PATCH 1/2] xfs: disable swap extents ioctl on CRC enabled filesystems Dave Chinner
2013-05-24  8:58     ` [PATCH 2/2] xfs: kill suid/sgid through the truncate path Dave Chinner
2013-05-24 10:02       ` Christoph Hellwig
2013-05-24 10:07         ` Christoph Hellwig
2013-05-24 18:29 ` [PATCH 00/11] xfs: fixes for 3.10-rc3 Ben Myers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369123330-9579-4-git-send-email-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=bpm@sgi.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.