From mboxrd@z Thu Jan 1 00:00:00 1970 From: sandeep suresh Date: Wed, 22 May 2013 13:49:40 +0800 (SGT) Subject: [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior In-Reply-To: References: <515A0847.7000306@gmail.com> <1365088789.89181.YahooMailNeo@web193504.mail.sg3.yahoo.com> <1365131280.68622.YahooMailNeo@web193506.mail.sg3.yahoo.com> <1365148844.61162.YahooMailNeo@web193503.mail.sg3.yahoo.com> <1365152761.13005.YahooMailNeo@web193505.mail.sg3.yahoo.com> <20830.46610.23754.783231@gargle.gargle.HOWL> <1365175482.75704.YahooMailNeo@web193505.mail.sg3.yahoo.com> <1365346495.79596.YahooMailNeo@web193506.mail.sg3.yahoo.com> <1366084534.24187.YahooMailNeo@web193501.mail.sg3.yahoo.com> <1366194814.88121.YahooMailNeo@web193506.mail.sg3.yahoo.com> <1366248389.18545.YahooMailNeo@web193503.mail.sg3.yahoo.com> <1366281249.7026.YahooMailNeo@web193504.mail.sg3.yahoo.com> <1369118418.41680.YahooMailNeo@web193504.mail.sg3.yahoo.com> Message-ID: <1369201780.73721.YahooMailNeo@web193506.mail.sg3.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello Mr.Adrian, ????Thanks for your comments. ? In fact I have used the same ath9k code available and called the initialization for 2-wire coexistence that was missing. I will test further (the following aspects)and commit the code with some documentation so that it will be useful for the community. ? Can you please further help me: 1. Commands to enable hostapd logging whichwill log the MLME events. 2. How can I enable missed beacon transmit events? Does it get automatically enabled during "modprobe ath9k diag=0xFFFFFFFF" ? ? Thanks & regards Sandeep Suresh ________________________________ From: Adrian Chadd To: sandeep suresh Cc: ath9k-devel ; "linux-wireless at vger.kernel.org" Sent: Tuesday, 21 May 2013 8:03 PM Subject: Re: [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior Hi! On 20 May 2013 23:40, sandeep suresh wrote: > Hello Mr.Adrian, >? ? Greetings! I resumed my experiments with 2-wire co-existence with AR9287 > in WiFi AP mode. > I was able to see that WLAN_STATUS signal being suppressed when BT_ACTIVE is > enabled. I used a 100ms On and 100ms Off (Period = 200ms; 50% dc) for > BT_ACTIVE. Just want to confirm the following before ensuring that I am > seeing the expected behavior: > Cool! Can you share some code and register settings to enable this? > 1. As I am running the WiFi AP with co-existence, other WiFi clients are > connected to my AP. by means of diagnsosis (I have enabled diagnosis with > modprobe ath9k btcoex_enabled=1 diag=0xffffffff), how can I find out if any > WiFi clients are loosing connection and re-connecting back to AP. I think you should enable hostapd logging. That will log the MLME events. > 2. How can I come to know if any of the beacons in WiFi AP mode are getting > missed? Diagnosis messages that I can look at. You can look for missed beacon transmit events. That should tell you if you're missing beacon transmission at all. > 3. As diagnosis is enabled I see the following....is this a concern as there > is disable and enable of IER? > <7>ath: disable IER > <7>ath: AR_IMR 0x918104b0 IER 0x1 > <7>ath: tx queue 2 (4bfc09c4), link ffde09c4 > <7>ath: enable IER > <7>ath: Enable TXE on queue: 2 > <7>ath: disable IER > <7>ath: AR_IMR 0x918104b0 IER 0x1 That's fine. That's what ath9k does with interrupts. :-) > 4. How can I come to know if the ath9k drivers are getting reset and > reinitializing? There's a hw reset routine that gets called. You can just look for the logging from that, or add a printk() yourself. Adrian -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130522/8357d8b0/attachment.htm