All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] ARM: OMAP4+: Cleanup header files
Date: Wed, 29 May 2013 15:39:53 +0530	[thread overview]
Message-ID: <1369822195-5277-2-git-send-email-lokeshvutla@ti.com> (raw)
In-Reply-To: <1369822195-5277-1-git-send-email-lokeshvutla@ti.com>

After having the u-boot clean up series, there are
many definitions that are unused in header files.
Removing all those unused ones.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/cpu/armv7/omap4/prcm-regs.c     |    3 +++
 arch/arm/cpu/armv7/omap5/prcm-regs.c     |    2 ++
 arch/arm/include/asm/arch-omap4/clocks.h |   28 ---------------------------
 arch/arm/include/asm/arch-omap4/cpu.h    |   12 ------------
 arch/arm/include/asm/arch-omap4/omap.h   |   14 --------------
 arch/arm/include/asm/arch-omap5/clocks.h |   22 ---------------------
 arch/arm/include/asm/arch-omap5/cpu.h    |   12 ------------
 arch/arm/include/asm/arch-omap5/omap.h   |   31 +-----------------------------
 arch/arm/include/asm/omap_common.h       |    4 +---
 board/ti/omap5_uevm/evm.c                |   12 ++++++++----
 board/ti/panda/panda.c                   |   20 +++++++++++--------
 board/ti/sdp4430/sdp.c                   |   16 +++++++++------
 drivers/usb/musb/omap3.c                 |    4 +++-
 13 files changed, 40 insertions(+), 140 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 7225a30..7e71ca0 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
 	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
 	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_usbotghs_ctrl			= 0x4A00233C,
+	.control_padconf_core_base		= 0x4A100000,
 	.control_pbiaslite			= 0x4A100600,
 	.control_lpddr2io1_0			= 0x4A100638,
 	.control_lpddr2io1_1			= 0x4A10063C,
@@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_lpddr2io2_3			= 0x4A100654,
 	.control_efuse_1			= 0x4A100700,
 	.control_efuse_2			= 0x4A100704,
+	.control_padconf_wkup_base		= 0x4A31E000,
 };
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index e9f6a32..db779f2 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -311,6 +311,7 @@ struct prcm_regs const omap5_es1_prcm = {
 
 struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_status				= 0x4A002134,
+	.control_padconf_core_base		= 0x4A002800,
 	.control_paconf_global			= 0x4A002DA0,
 	.control_paconf_mode			= 0x4A002DA4,
 	.control_smart1io_padconf_0		= 0x4A002DA8,
@@ -358,6 +359,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_padconf_wkup_base		= 0x4AE0C800,
 	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
 	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
 	.control_padconf_mode			= 0x4AE0CDA8,
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index ed7a1c8..f544edf 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -34,25 +34,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		0x4A004120
-#define CM_CLKMODE_DPLL_PER		0x4A008140
-#define CM_CLKMODE_DPLL_MPU		0x4A004160
-#define CM_CLKSEL_CORE			0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-#define CM_DIV_M2_DPLL		0x10
-#define CM_DIV_M3_DPLL		0x14
-#define CM_DIV_M4_DPLL		0x18
-#define CM_DIV_M5_DPLL		0x1C
-#define CM_DIV_M6_DPLL		0x20
-#define CM_DIV_M7_DPLL		0x24
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT	0
 #define CM_DLL_CTRL_OVERRIDE_MASK	(1 << 0)
@@ -94,8 +75,6 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
 #define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
 
@@ -181,9 +160,7 @@
 #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 25)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -234,11 +211,6 @@
 
 #define ALTCLKSRC_MODE_ACTIVE		1
 
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
-
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 3a0bfbf..311c6ff 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -115,18 +115,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index e9a6ffe..2cd034e 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -47,14 +47,6 @@
 #define DRAM_ADDR_SPACE_START	OMAP44XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP44XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP	(OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
 /* CONTROL_ID_CODE */
 #define CONTROL_ID_CODE		0x4A002204
 
@@ -79,15 +71,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP44XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP44XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index 68afa76..6673a02 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -35,19 +35,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		(OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER		(OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU		(OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE			(OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT		0
 #define CM_DLL_CTRL_OVERRIDE_MASK		(1 << 0)
@@ -93,8 +80,6 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
 #define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
 
@@ -195,9 +180,7 @@
 #define RSTTIME1_MASK				(0x3ff << 0)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -247,11 +230,6 @@
 #define TPS62361_BASE_VOLT_MV	500
 #define TPS62361_VSEL0_GPIO	7
 
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
-
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 044ab55..4753f46 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -119,18 +119,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 4f43a90..6dfedf4 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,16 +44,8 @@
 #define DRAM_ADDR_SPACE_START	OMAP54XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP54XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP	(OMAP54XX_L4_WKUP_BASE + 0xc800)
-
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
 /* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE		(CTRL_BASE + 0x204)
+#define CONTROL_ID_CODE		0x4A002204
 
 /* To be verified */
 #define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
@@ -62,11 +54,6 @@
 #define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
 #define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
 
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1		(CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT	16
-#define PROD_ID_1_SILICON_TYPE_MASK	(3 << 16)
-
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
 #define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +67,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP54XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP54XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
@@ -191,16 +172,6 @@ struct s32ktimer {
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4031F000
 
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
-#define OMAP4430_ES1_0	0x44300100
-#define OMAP4430_ES2_0	0x44300200
-#define OMAP4430_ES2_1	0x44300210
-#define OMAP4430_ES2_2	0x44300220
-#define OMAP4430_ES2_3	0x44300230
-#define OMAP4460_ES1_0	0x44600100
-#define OMAP4460_ES1_1	0x44600110
-
 /* CONTROL_SRCOMP_XXX_SIDE */
 #define OVERRIDE_XS_SHIFT		30
 #define OVERRIDE_XS_MASK		(1 << 30)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index ee7b188..8747bff 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -362,6 +362,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ldosram_iva_voltage_ctrl;
 	u32 control_ldosram_mpu_voltage_ctrl;
 	u32 control_ldosram_core_voltage_ctrl;
+	u32 control_usbotghs_ctrl;
 	u32 control_padconf_core_base;
 	u32 control_paconf_global;
 	u32 control_paconf_mode;
@@ -546,9 +547,6 @@ void scale_vcores(struct vcores_data const *);
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
 
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N	127
-
 /* HW Init Context */
 #define OMAP_INIT_CONTEXT_SPL			0
 #define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR	1
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 46db1bf..90046e8 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -71,22 +71,26 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 }
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 }
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 2bbe392..4335259 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -139,16 +139,18 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				 wkup_padconf_array_essential_4460,
 				 sizeof(wkup_padconf_array_essential_4460) /
 				 sizeof(struct pad_conf_entry));
@@ -156,27 +158,29 @@ void set_muxconf_regs_essential(void)
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_CORE,
+		do_set_mux((*ctrl)->control_padconf_core_base,
 				core_padconf_array_non_essential_4430,
 				sizeof(core_padconf_array_non_essential_4430) /
 				sizeof(struct pad_conf_entry));
 	else
-		do_set_mux(CONTROL_PADCONF_CORE,
+		do_set_mux((*ctrl)->control_padconf_core_base,
 				core_padconf_array_non_essential_4460,
 				sizeof(core_padconf_array_non_essential_4460) /
 				sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				wkup_padconf_array_non_essential_4430,
 				sizeof(wkup_padconf_array_non_essential_4430) /
 				sizeof(struct pad_conf_entry));
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 4c1a4f7..5dd1ba3 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -72,16 +72,18 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				 wkup_padconf_array_essential_4460,
 				 sizeof(wkup_padconf_array_essential_4460) /
 				 sizeof(struct pad_conf_entry));
@@ -89,16 +91,18 @@ void set_muxconf_regs_essential(void)
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0) {
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 			wkup_padconf_array_non_essential_4430,
 			sizeof(wkup_padconf_array_non_essential_4430) /
 			sizeof(struct pad_conf_entry));
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index c7876ed..a395ebc 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -30,6 +30,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm/omap_common.h>
 #include <twl4030.h>
 #include <twl6030.h>
 #include "omap3.h"
@@ -135,7 +136,8 @@ int musb_platform_init(void)
 #endif
 
 #ifdef CONFIG_OMAP4430
-		u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+		u32 *usbotghs_control =
+			(u32 *)((*ctrl)->control_usbotghs_ctrl);
 		*usbotghs_control = 0x15;
 #endif
 		platform_needs_initialization = 0;
-- 
1.7.9.5

  reply	other threads:[~2013-05-29 10:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-29 10:09 [U-Boot] [PATCH 0/3] ARM: OMAP4+: Misc Cleanup Lokesh Vutla
2013-05-29 10:09 ` Lokesh Vutla [this message]
2013-05-29 10:09 ` [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks Lokesh Vutla
2013-05-29 12:40   ` Tom Rini
2013-05-29 13:17     ` Sricharan R
2013-05-29 10:09 ` [U-Boot] [PATCH 3/3] ARM: OMAP4+: pmic: Make generic bus init and write functions Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369822195-5277-2-git-send-email-lokeshvutla@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.