From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Andrzej Siewior Subject: [PATCH 15/22] input & mfd: ti_am335x_tsc remove remaining platform data pieces Date: Wed, 5 Jun 2013 18:24:48 +0200 Message-ID: <1370449495-29981-16-git-send-email-bigeasy@linutronix.de> References: <1370449495-29981-1-git-send-email-bigeasy@linutronix.de> Return-path: Received: from www.linutronix.de ([62.245.132.108]:35253 "EHLO Galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754553Ab3FEQ1D (ORCPT ); Wed, 5 Jun 2013 12:27:03 -0400 In-Reply-To: <1370449495-29981-1-git-send-email-bigeasy@linutronix.de> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Samuel Ortiz Cc: Felipe Balbi , linux-iio@vger.kernel.org, linux-input@vger.kernel.org, Dmitry Torokhov , Jonathan Cameron , Sebastian Andrzej Siewior The two header files removed here are unused and have no users as this platform was never used with platform devices. Signed-off-by: Sebastian Andrzej Siewior --- include/linux/input/ti_am335x_tsc.h | 35 --------------------------- include/linux/mfd/ti_am335x_tscadc.h | 5 ---- include/linux/platform_data/ti_am335x_adc.h | 14 ----------- 3 files changed, 54 deletions(-) delete mode 100644 include/linux/input/ti_am335x_tsc.h delete mode 100644 include/linux/platform_data/ti_am335x_adc.h diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h deleted file mode 100644 index 6a66b4d..0000000 --- a/include/linux/input/ti_am335x_tsc.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __LINUX_TI_AM335X_TSC_H -#define __LINUX_TI_AM335X_TSC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - * @steps_to_configure: The sequencer supports a total of - * 16 programmable steps. - * A step configured to read a single - * co-ordinate value, can be applied - * more number of times for better results. - * @wire_config: Different EVM's could have a different order - * for connecting wires on touchscreen. - * We need to provide an 8 bit number where in - * the 1st four bits represent the analog lines - * and the next 4 bits represent positive/ - * negative terminal on that input line. - * Notations to represent the input lines and - * terminals resoectively is as follows: - * AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. - * XP = 0, XN = 1, YP = 2, YN = 3. - * - */ - -struct tsc_data { - int wires; - int x_plate_resistance; - int steps_to_configure; - int wire_config[10]; -}; - -#endif diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index b6e7ac6..cd8686b 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -127,11 +127,6 @@ #define TSCADC_CELLS 2 -struct mfd_tscadc_board { - struct tsc_data *tsc_init; - struct adc_data *adc_init; -}; - struct ti_tscadc_dev { struct device *dev; void __iomem *tscadc_base; diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h deleted file mode 100644 index e41d583..0000000 --- a/include/linux/platform_data/ti_am335x_adc.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __LINUX_TI_AM335X_ADC_H -#define __LINUX_TI_AM335X_ADC_H - -/** - * struct adc_data ADC Input information - * @adc_channels: Number of analog inputs - * available for ADC. - */ - -struct adc_data { - unsigned int adc_channels; -}; - -#endif -- 1.7.10.4