From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Andrzej Siewior Subject: [PATCH 06/22] input/ti_am33x_tsc: Add DT support Date: Wed, 5 Jun 2013 18:24:39 +0200 Message-ID: <1370449495-29981-7-git-send-email-bigeasy@linutronix.de> References: <1370449495-29981-1-git-send-email-bigeasy@linutronix.de> Return-path: In-Reply-To: <1370449495-29981-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Samuel Ortiz Cc: Felipe Balbi , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Dmitry Torokhov , Jonathan Cameron , "Patil, Rachna" , Pantelis Antoniou , Sebastian Andrzej Siewior List-Id: linux-input@vger.kernel.org From: "Patil, Rachna" Add DT support for client touchscreen driver [ panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org : use of_get_child_by_name instead of of_find_node_by_name ] Signed-off-by: Pantelis Antoniou Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi [ bigeasy: shift the code to the left, shirnk titsc_parse_dt() by not using temp value, change a binding and document them in ti-tsc-adc.txt which also contains ADC binding which will be used later] Signed-off-by: Sebastian Andrzej Siewior --- .../bindings/input/touchscreen/ti-tsc-adc.txt | 44 +++++++++ drivers/input/touchscreen/ti_am335x_tsc.c | 102 +++++++++++++++----- 2 files changed, 123 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt new file mode 100644 index 0000000..491c97b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -0,0 +1,44 @@ +* TI - TSC ADC (Touschscreen and analog digital converter) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: +- child "tsc" + ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen + support on the platform. + ti,x-plate-resistance: X plate resistance + ti,coordiante-readouts: The sequencer supports a total of 16 + programmable steps each step is used to + read a single coordinate. A single + readout is enough but multiple reads can + increase the quality. + A value of 5 means, 5 reads for X, 5 for + Y and 2 for Z (always). This utilises 12 + of the 16 software steps available. The + remaining 4 can be used by the ADC. + ti,wire-config: Different boards could have a different order for + connecting wires on touchscreen. We need to provide an + 8 bit number where in the 1st four bits represent the + analog lines and the next 4 bits represent positive/ + negative terminal on that input line. Notations to + represent the input lines and terminals resoectively + is as follows: + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + XP = 0, XN = 1, YP = 2, YN = 3. +- child "adc" + ti,adc-channels: List of analog inputs available for ADC. + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + +Example: + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordiante-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; + } diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index b2f8a46..c876385 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include @@ -47,7 +49,7 @@ struct titsc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; - int steps_to_configure; + int coordiante_readouts; u32 config_inp[4]; u32 bit_xp, bit_xn, bit_yp, bit_yn; u32 inp_xp, inp_xn, inp_yp, inp_yn; @@ -123,7 +125,7 @@ static void titsc_step_config(struct titsc *ts_dev) int i, total_steps; /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; + total_steps = 2 * ts_dev->coordiante_readouts; config = STEPCONFIG_MODE_HWSYNC | STEPCONFIG_AVG_16 | ts_dev->bit_xp; @@ -141,7 +143,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = 1; i <= ts_dev->steps_to_configure; i++) { + for (i = 1; i <= ts_dev->coordiante_readouts; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -163,7 +165,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + for (i = (ts_dev->coordiante_readouts + 1); i <= total_steps; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -218,7 +220,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO0); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { + if ((channel >= 0) && (channel < ts_dev->coordiante_readouts)) { read &= 0xfff; diff = abs(read - prev_val_x); if (diff < prev_diff_x) { @@ -231,8 +233,8 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO1); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= ts_dev->steps_to_configure) && - (channel < (2 * ts_dev->steps_to_configure - 1))) { + if ((channel >= ts_dev->coordiante_readouts) && + (channel < (2 * ts_dev->coordiante_readouts - 1))) { read &= 0xfff; diff = abs(read - prev_val_y); if (diff < prev_diff_y) { @@ -310,6 +312,62 @@ static irqreturn_t titsc_irq(int irq, void *dev) return IRQ_HANDLED; } +static int titsc_parse_dt(struct ti_tscadc_dev *tscadc_dev, + struct titsc *ts_dev) +{ + struct device_node *node = tscadc_dev->dev->of_node; + int err; + + if (!node) + return -EINVAL; + + node = of_get_child_by_name(node, "tsc"); + if (!node) + return -EINVAL; + err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); + if (err < 0) + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } + + err = of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); + if (err < 0) + return err; + + err = of_property_read_u32(node, "ti,coordiante-readouts", + &ts_dev->coordiante_readouts); + if (err < 0) + return err; + + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); +} + +static int titsc_parse_pdata(struct ti_tscadc_dev *tscadc_dev, + struct titsc *ts_dev) +{ + struct mfd_tscadc_board *pdata = tscadc_dev->dev->platform_data; + + if (!pdata) + return -EINVAL; + + ts_dev->wires = pdata->tsc_init->wires; + ts_dev->x_plate_resistance = + pdata->tsc_init->x_plate_resistance; + ts_dev->steps_to_configure = + pdata->tsc_init->steps_to_configure; + memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, + sizeof(pdata->tsc_init->wire_config)); + return 0; +} + /* * The functions for inserting/removing driver as a module. */ @@ -319,16 +377,8 @@ static int titsc_probe(struct platform_device *pdev) struct titsc *ts_dev; struct input_dev *input_dev; struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev); - struct mfd_tscadc_board *pdata; int err; - pdata = tscadc_dev->dev->platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "Could not find platform data\n"); - return -EINVAL; - } - /* Allocate memory for device */ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); input_dev = input_allocate_device(); @@ -342,11 +392,17 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; ts_dev->irq = tscadc_dev->irq; - ts_dev->wires = pdata->tsc_init->wires; - ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; - ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; - memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, - sizeof(pdata->tsc_init->wire_config)); + + if (tscadc_dev->dev->platform_data) + err = titsc_parse_pdata(tscadc_dev, ts_dev); + else + err = titsc_parse_dt(tscadc_dev, ts_dev); + + if (err) { + dev_err(&pdev->dev, "Could not find platform data\n"); + err = -EINVAL; + goto err_free_mem; + } err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -362,7 +418,7 @@ static int titsc_probe(struct platform_device *pdev) goto err_free_irq; } titsc_step_config(ts_dev); - titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->coordiante_readouts); input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; @@ -398,7 +454,7 @@ static int titsc_remove(struct platform_device *pdev) free_irq(ts_dev->irq, ts_dev); /* total steps followed by the enable mask */ - steps = 2 * ts_dev->steps_to_configure + 2; + steps = 2 * ts_dev->coordiante_readouts + 2; steps = (1 << steps) - 1; am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps); @@ -439,7 +495,7 @@ static int titsc_resume(struct device *dev) } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, - ts_dev->steps_to_configure); + ts_dev->coordiante_readouts); return 0; } -- 1.7.10.4 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from www.linutronix.de ([62.245.132.108]:35161 "EHLO Galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755902Ab3FEQZN (ORCPT ); Wed, 5 Jun 2013 12:25:13 -0400 From: Sebastian Andrzej Siewior To: Samuel Ortiz Cc: Felipe Balbi , linux-iio@vger.kernel.org, linux-input@vger.kernel.org, Dmitry Torokhov , Jonathan Cameron , "Patil, Rachna" , Pantelis Antoniou , Sebastian Andrzej Siewior Subject: [PATCH 06/22] input/ti_am33x_tsc: Add DT support Date: Wed, 5 Jun 2013 18:24:39 +0200 Message-Id: <1370449495-29981-7-git-send-email-bigeasy@linutronix.de> In-Reply-To: <1370449495-29981-1-git-send-email-bigeasy@linutronix.de> References: <1370449495-29981-1-git-send-email-bigeasy@linutronix.de> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org From: "Patil, Rachna" Add DT support for client touchscreen driver [ panto@antoniou-consulting.com : use of_get_child_by_name instead of of_find_node_by_name ] Signed-off-by: Pantelis Antoniou Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi [ bigeasy: shift the code to the left, shirnk titsc_parse_dt() by not using temp value, change a binding and document them in ti-tsc-adc.txt which also contains ADC binding which will be used later] Signed-off-by: Sebastian Andrzej Siewior --- .../bindings/input/touchscreen/ti-tsc-adc.txt | 44 +++++++++ drivers/input/touchscreen/ti_am335x_tsc.c | 102 +++++++++++++++----- 2 files changed, 123 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt new file mode 100644 index 0000000..491c97b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -0,0 +1,44 @@ +* TI - TSC ADC (Touschscreen and analog digital converter) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: +- child "tsc" + ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen + support on the platform. + ti,x-plate-resistance: X plate resistance + ti,coordiante-readouts: The sequencer supports a total of 16 + programmable steps each step is used to + read a single coordinate. A single + readout is enough but multiple reads can + increase the quality. + A value of 5 means, 5 reads for X, 5 for + Y and 2 for Z (always). This utilises 12 + of the 16 software steps available. The + remaining 4 can be used by the ADC. + ti,wire-config: Different boards could have a different order for + connecting wires on touchscreen. We need to provide an + 8 bit number where in the 1st four bits represent the + analog lines and the next 4 bits represent positive/ + negative terminal on that input line. Notations to + represent the input lines and terminals resoectively + is as follows: + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + XP = 0, XN = 1, YP = 2, YN = 3. +- child "adc" + ti,adc-channels: List of analog inputs available for ADC. + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + +Example: + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordiante-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; + } diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index b2f8a46..c876385 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include @@ -47,7 +49,7 @@ struct titsc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; - int steps_to_configure; + int coordiante_readouts; u32 config_inp[4]; u32 bit_xp, bit_xn, bit_yp, bit_yn; u32 inp_xp, inp_xn, inp_yp, inp_yn; @@ -123,7 +125,7 @@ static void titsc_step_config(struct titsc *ts_dev) int i, total_steps; /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; + total_steps = 2 * ts_dev->coordiante_readouts; config = STEPCONFIG_MODE_HWSYNC | STEPCONFIG_AVG_16 | ts_dev->bit_xp; @@ -141,7 +143,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = 1; i <= ts_dev->steps_to_configure; i++) { + for (i = 1; i <= ts_dev->coordiante_readouts; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -163,7 +165,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + for (i = (ts_dev->coordiante_readouts + 1); i <= total_steps; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -218,7 +220,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO0); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { + if ((channel >= 0) && (channel < ts_dev->coordiante_readouts)) { read &= 0xfff; diff = abs(read - prev_val_x); if (diff < prev_diff_x) { @@ -231,8 +233,8 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO1); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= ts_dev->steps_to_configure) && - (channel < (2 * ts_dev->steps_to_configure - 1))) { + if ((channel >= ts_dev->coordiante_readouts) && + (channel < (2 * ts_dev->coordiante_readouts - 1))) { read &= 0xfff; diff = abs(read - prev_val_y); if (diff < prev_diff_y) { @@ -310,6 +312,62 @@ static irqreturn_t titsc_irq(int irq, void *dev) return IRQ_HANDLED; } +static int titsc_parse_dt(struct ti_tscadc_dev *tscadc_dev, + struct titsc *ts_dev) +{ + struct device_node *node = tscadc_dev->dev->of_node; + int err; + + if (!node) + return -EINVAL; + + node = of_get_child_by_name(node, "tsc"); + if (!node) + return -EINVAL; + err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); + if (err < 0) + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } + + err = of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); + if (err < 0) + return err; + + err = of_property_read_u32(node, "ti,coordiante-readouts", + &ts_dev->coordiante_readouts); + if (err < 0) + return err; + + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); +} + +static int titsc_parse_pdata(struct ti_tscadc_dev *tscadc_dev, + struct titsc *ts_dev) +{ + struct mfd_tscadc_board *pdata = tscadc_dev->dev->platform_data; + + if (!pdata) + return -EINVAL; + + ts_dev->wires = pdata->tsc_init->wires; + ts_dev->x_plate_resistance = + pdata->tsc_init->x_plate_resistance; + ts_dev->steps_to_configure = + pdata->tsc_init->steps_to_configure; + memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, + sizeof(pdata->tsc_init->wire_config)); + return 0; +} + /* * The functions for inserting/removing driver as a module. */ @@ -319,16 +377,8 @@ static int titsc_probe(struct platform_device *pdev) struct titsc *ts_dev; struct input_dev *input_dev; struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev); - struct mfd_tscadc_board *pdata; int err; - pdata = tscadc_dev->dev->platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "Could not find platform data\n"); - return -EINVAL; - } - /* Allocate memory for device */ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); input_dev = input_allocate_device(); @@ -342,11 +392,17 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; ts_dev->irq = tscadc_dev->irq; - ts_dev->wires = pdata->tsc_init->wires; - ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; - ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; - memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, - sizeof(pdata->tsc_init->wire_config)); + + if (tscadc_dev->dev->platform_data) + err = titsc_parse_pdata(tscadc_dev, ts_dev); + else + err = titsc_parse_dt(tscadc_dev, ts_dev); + + if (err) { + dev_err(&pdev->dev, "Could not find platform data\n"); + err = -EINVAL; + goto err_free_mem; + } err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -362,7 +418,7 @@ static int titsc_probe(struct platform_device *pdev) goto err_free_irq; } titsc_step_config(ts_dev); - titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->coordiante_readouts); input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; @@ -398,7 +454,7 @@ static int titsc_remove(struct platform_device *pdev) free_irq(ts_dev->irq, ts_dev); /* total steps followed by the enable mask */ - steps = 2 * ts_dev->steps_to_configure + 2; + steps = 2 * ts_dev->coordiante_readouts + 2; steps = (1 << steps) - 1; am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps); @@ -439,7 +495,7 @@ static int titsc_resume(struct device *dev) } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, - ts_dev->steps_to_configure); + ts_dev->coordiante_readouts); return 0; } -- 1.7.10.4