[PATCH v2 1/2] ARM: dts: tegra20: Rename USB UTMI parameters according to new definitions

[Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

This patch changes the Tegra20 USB PHY nodes to use the UTMI configuration
parameter names as specified in the device tree binding documentation
after patch "ARM: tegra: finalize USB EHCI and PHY bindings".

Signed-off-by: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/tegra20.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9653fd8..e457083 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -477,13 +477,13 @@
 			 <&tegra_car TEGRA20_CLK_USBD>;
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
 		nvidia,has-legacy-mode;
-		hssync_start_delay = <9>;
-		idle_wait_delay = <17>;
-		elastic_limit = <16>;
-		term_range_adj = <6>;
-		xcvr_setup = <9>;
-		xcvr_lsfslew = <1>;
-		xcvr_lsrslew = <1>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
 		status = "disabled";
 	};
 
@@ -527,13 +527,13 @@
 			 <&tegra_car TEGRA20_CLK_CLK_M>,
 			 <&tegra_car TEGRA20_CLK_USBD>;
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		hssync_start_delay = <9>;
-		idle_wait_delay = <17>;
-		elastic_limit = <16>;
-		term_range_adj = <6>;
-		xcvr_setup = <9>;
-		xcvr_lsfslew = <2>;
-		xcvr_lsrslew = <2>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
 		status = "disabled";
 	};
 
-- 
1.8.1.5